共用模板技术的应用,有效地降低了复合模成本并缩短了制造周期。
The application of the Shared plate technology effectively lowered the cost of the compound die and shortened the manufacturing cycle.
第一组是消隐和冲压复合模。
介绍了复合模的结构、特点及工作过程。
The working course, characteristic and the structure of the compound mould are introduced.
介绍了复合模的结构、特点及工作过程。
The structure, character and operating process of the die was described.
同时也阐述了复合模工作过程及注意事项。
In addition, both the working process of compound die and questions required attention are stated.
本次设计阐述了冲压倒装复合模的结构设计以及工作过程。
The design describes the structure of compound die stamping flip-chip design and working process.
介绍了复合模的结构特点及工作过程,分析了齐边的工艺过程。
Die structure characteristics and working procedure were introduced and edging process was analyzed.
设计制造复杂形状零件的复合模以及各种复合工艺的多工位连续模。
Design and making composite molding of form-complicated parts and multifunction progressive molding with composite technics.
针对锁紧片零件,设计了折弯压凸复合模,并介绍了模具结构和工作过程。
The bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.
针对锁紧片零件,设计了折弯压凸复合模,并介绍了模具结构和工作过程。
The structure and design method of typical bending slide block using in punching die were introduced.
介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。
This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.
模具为倒装复合模,工件开始放在定位板上,冲压完成后工件从上端由推件装置推出。
Die for Flip composite mold, started on the workpiece positioning plate, stamping the completion of the workpiece from the top by pushing the device launched.
介绍了用于单动压力机的新型恒压边力落料拉伸复合模的结构及主要设计参数和模具工作过程。
The structure, main design parameters and work process of the compound die installed on single action press and working for blanking and drawing with constant blank holder pressure were presented.
分析了轴盖的冲压工艺性,对传统工艺进行了改进,介绍了其复合模和修边模结构及设计要点。
The work process of the trimming die for vertically forming the thin-wall barrels of the shell top part of hot-water shower device was introduced.
分析了车厢侧板零件通风窗冲压加工的工艺特点,设计了一副针对该零件加工的切口拉伸复合模。
Analyzed press technology characteristics of vent-windows of the car side board, designed a lancing-drawing compound die.
介绍大屏幕彩色电视机主印制板多小孔复合模的模具结构、设计参数、材料的选用和制造工艺等。
The structural design, design parameters, material chosen and manufacture process of multi-pinhole compound die of main printed circuit board for large screen color TV are introduced.
主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。
Mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.
对三角形底盘筒形件的成形工艺进行了分析,决定采用弯曲、拉深、胀形复合模等进行复合成形。
As the shape technology of triangle chassis canister is analyzed, then the processes of bending, stretching and bulging compound mould are adopted to reunite the shape.
介绍了一种适用于折板机的铰链卷圆成形复合模,讨论了该模具的结构特点和设计中应注意的问题。
A curling compound die for the hinge used for the plate-bending machine was introduced. The structure characteristics of the die and the attention problems in the design of the die were discussed.
使用膨胀型复合模铸保护渣保护浇注钢锭,普遍存在的一个问题是容易使钢锭产生头部积渣这一表面缺陷。
A general problem in protecting the casting ingots by using expanded complex mould casting mold powder is the surface defect that slag deposition can be evolved easily in ingots head.
针对锁紧片零件,设计了折弯压凸复合模,并介绍了模具结构和工作过程。提高了产品质量以及生产效率。
The bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.
通过对型材零件的分析,提出了适当有效的成形工艺方案,在此基础上设计了压窝冲孔复合模,并计算了成形力。
Through the analysis of parts made by section material, an appropriate and effective technological process is put forward.
通过对左座椅调整器的成形性工艺分析,提出了采用两套复合模结构的方法,并介绍了模具的具体结构及模具工作过程。
Through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward.
通过对左座椅调整器的成形性工艺分析,提出了采用两套复合模结构的方法,并介绍了模具的具体结构及模具工作过程。
Through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward. The specific die structure and its work pro - cess are introduced.
多传感器数据管理策略是多模复合制导数据融合的核心问题之一。
The multi-sensor data management strategy is one of the key problems for multi-pattern composite guidance data fusion.
运用有限元方法分析了模切板刀片的复合弯曲成形,对成形过程中的回弹进行了研究。
The finite element analysis of the compound bending forming process is done for knives of the template. The spring back in the forming procedure is investigated.
本发明公开了一种用于切割卷状高强高模聚乙烯纤维增强复合材料的切片设备和切片方法。
The invention discloses a slicing device and a slicing method which are used for cutting roll-shaped high-strength high-modulus polyethylene fiber reinforced composite material.
并采用一次成形的复合复位模结构,既保证了产品的质量,又提高了生产效率,同时降低了生产成本。
The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.
并采用一次成形的复合复位模结构,既保证了产品的质量,又提高了生产效率,同时降低了生产成本。
The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.
应用推荐