车身单体(包括基本车身和底盘)采用了强度高而质量轻的复合材料技术制造。
The monocoque (the basic body and chassis) is built using tough but light composite technology.
整个建筑是一个复合百叶组成的多层表皮系统,这些百叶可旋转和变厚以适应不同的日照强度、通风要求和材料性能。
The building is a system of multiple layers of composite louvers which thicken and rotate according to solar exposure, ventilation, and materials performance.
复合材料的纳米结构也能使较轻的材料具有很大机械强度。
The nanostructure of composites can also provide great mechanical strength in relatively light materials.
能源循环车轮由碳纤维-芳纶复合材料制成,从而减轻重量,增强整体强度。
Energy Return Wheel is made out of carbon fiber and kevlar components that decrease the weight and increae the overall strength.
我们制造的这种纳米复合材料柔软,可塑性强,而且机械强度大。
We make this nanocomposite which is flexible, still soft, but mechanically stronger.
蚱蜢自行车是一种可折叠的电动自行车,它可以被折叠成手推车形,便于携带。复合材料的使用,保证了其硬度和强度。
Grasshopper is a foldable electric bicycle that turns into a trolley for easy transport. The use of composite materials provides rigidity and strength.
陶瓷-金属复合材料具备高硬度、高强度、高韧性以及低密度的优点,已被广泛应用于防弹领域。
The ceramic-metal composite materials have the advantages of high hardness, strength, toughness and low density, and are widely used in bulletproof field.
试验结果表明:玻纤增强复合土工布具有强度高、抗蠕变能力强的优点。
The experimental results show that the glass fibre reinforced composite geotextiles possess excellent tensile strength and creep deformation resistance.
该复合压力容器以其质量轻、强度高和安全可靠等优点已经广泛应用于航空航天、军事及工业领域。
Because of the composite pressure vessels' advantages such as light weight, high strength, safety and reliability, they have been widely used in aerospace, military and industrial fields.
基于复合材料力学理论,建立了双因素、双参数的钢纤维混凝土抗拉强度普适计算模式。
In this paper, a model with double factors and double parameters for calculating tensile strength of steel fiber reinforced concrete (SFRC) is established on the basis of composite material mechanics.
通过使用本实验室设计的低温拉伸夹具,测定了纳米二氧化硅改性环氧树脂复合材料在室温和液氮(77K)环境下的拉伸强度、弹性模量和延伸率。
Measurement of tensile strength , modulus and strain of nanometer SiO2/epoxy composite materials was conducted using self-designed tensile testing jigs at room temperature and 77K.
本文讨论了复合材料强度的统计分析方法。
In this paper a statistical analysis method for strength of composite materials is treated.
多层复合镀层具有良好的结合强度。
Multilayer composite coatings have good connective strength.
单纤维段裂试验作为复合材料界面剪切强度的一种测试方法被沿用至今。
The single fiber fragmentation test has been used to determine the interfacial shear strength of composite materials.
采用面积比的公式计算了粉喷桩复合地基的抗剪强度。
The cut strength of cement soil pile composite foundation is calculated using the area ratio formula.
碳纤维复合芯导线(ACCC)是一种全新概念的架空线路用导线,具有重量轻、强度高、热稳定性好、弛度小、载流量大和耐腐蚀的特点。
Aluminum conductor Composite Core is a brand new conductor for overhead lines. Its advantages are light weight, high strength, good thermal stability, low sag, large ampacity and corrosion resistance.
碳纤维复合材料(CFRP材料)具有自重轻、强度高等许多优点,在桥梁工程尤其是桥梁加固工程上得到较广泛地应用。
CFRP has many advantages, such as lightness and high strength, etc. It has been widely used in bridge engineering especially in strengthening of Bridges.
本文结果为进一步研究正交叠层复合材料的细观破坏机理、最终拉伸强度及协同效应等提供了重要的理论依据。
The present results may provide an important theoretical basis for further studying the micro-failure mechanism, ultimate strength and synergistic effect for cross-ply laminates under tension.
探讨了热处理温度、萃取条件、晶须含量、粉体粒径对偏磷酸钙产物形貌和复合材料强度的影响。
The factors influencing the morphology and strength of the samples such as heating temperature, extraction condition, crystal content and powder diameter were discussed.
此时,复合材料的拉伸强度和维卡软化温度也有所升高。
The Vicat temperature and tensile strength of the blends were also increased.
随着温度的升高,复合材料板材强度逐渐下降,延伸率增大。
It is also found that the strength of these materials decreases and the ductility increases with increasing temperature.
用金刚锥显微脱粘法测得复合材料的界面强度。
The interfacial strength was measured using pyramidal diamond micro-debonding method.
随着熔体拉伸比的增大,复合丝拉伸强度大幅度提高,达到了良好的原位增强效果。
With the increasing of drawing ratio, the tensile strength of composilefibres is enhanced greatly and good in-situ reinforcement can be obtained.
该理论不仅可以给出复合材料的初裂强度和极限强度,而且还能给出复合材料的应力-应变曲线。
Not only the strength at first crack and ultimate strength can be calculated, but the stress-strain curve of composite material can be established.
公司通过近几年的研发,现已开发出一系列高强度无碱无蜡玻璃纤维复合材料基布,具有布面柔软、强度高、渗透性能好等特点。
Yao Kai has a series of high strength E-glass fibre fabrics for composite products. The characteristics of the fabric are softness, high strength and fast wet-out and wet-through.
研究结果表明,复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
结果表明,随着碳纤维布含量的增加,复合材料的拉伸强度、冲击强度提高;
The results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.
纯粹的聚合物凝胶力学强度相对较低,而新型多功能复合凝胶的力学强度相对较高,能有效的解决井下地层漏失。
The pure polymer gel has low mechanical strength, but the new multi-function composite gel has high mechanical strength, which can control the down-hole loss circulation effectively.
纯粹的聚合物凝胶力学强度相对较低,而新型多功能复合凝胶的力学强度相对较高,能有效的解决井下地层漏失。
The pure polymer gel has low mechanical strength, but the new multi-function composite gel has high mechanical strength, which can control the down-hole loss circulation effectively.
应用推荐