同时给出了各种增容剂的增容机理。
At the same time, the compatibilization mechanisms were given.
最后对EPP的增容机理进行了探讨。
水轮机增容改造市场广阔。
Hydraulic turbine modernization has created a remarkable market.
由于浴室增容，须对加热设备进行改造。
With the capacity of bathrooms increasing fast, the heating facilities should be renovated.
同时研究了不同增容剂及其用量对并用胶力学性能的影响。
Furthermore, the effects of the different compatibilizers and amounts on mechanical properties of blends were also studied.
综述了聚合物共混物的反应性增容及相形态控制的研究现状。
Reactive compatibilization, its mechanism and morphology control factors in polymer blends were briefly reviewed.
展望了聚丙烯接枝物及增容PP/PA塑料合金的应用前景。
Then it discusses the developing trends and potential application of grafting PP and compatibilized PP/PA plastics-alloy.
核算公司电力、压缩空气容量需求并及时提出增容计划和申请；
Calculate electric power and volume of compressed air, if necessary put forward a plan for increase the volume.
试验结果表明CPE对PVC/SBR共混体系有良好的增容作用。
The result showed that CPE had good compatibilization for PVC/SBR blend.
我发现要令电视广告的销售力倍增，比令节目观众倍增容易得多了。
I have found that it is easier to double the selling power of a commercial than to double the audience of a programme.
综述了增容聚苯乙烯与聚乙烯、聚丙烯、聚酰胺共混物的研究进展。
The research development of compatibilized polystyrene blends with polyethylene, polypropylene, polyamide was reviewed.
结果表明，电站增容后引水系统完全能满足有关规范和设计的要求。
The results show the water diversion system can satisfy the requirement of specification and design after the power plant capacity enlargement.
聚酯装置酯化系统增容改造后，生产工艺变化很大，控制难度增加。
The production process of esterification system in polyester plant changed greatly after capacity expansion rectification, and the difficulty in control increased.
用马来酸酐接枝聚乙烯作增容剂能提高PC/ABS合金的抗静电性能；
The anti-static property of PC/ABS blends can be improved to some extent by adding PEg-MAH.
分析结果表明，实现对卧虎山水库增容具有明显的经济效益和社会效益。
The results of analysis make clear, it has great social benefits and economic benefits.
本文正是在此基础上，进一步讨论有关的递增容度及其乘积的相关性质。
Based on the foundations, th-is thesis gives a further discussion on the relevant properties of increasing capacities and the products of increasing capacities.
企业供电设施增容改造受资金制约，跟不上用电负荷的增长是个共性问题。
It is a general problem that increasing capacity and transformation of power supply facility in enterprises are limited by fund, which can not meet the needs of increasing power consumption.
在夏季负荷高峰期，站内已经出现了主变过负荷现象，增容扩建迫在眉睫。
In summer high load period, transformers in this station had overload, so it's urgent to take into the extension.
介绍了朝阳寺水电站扩机增容工程的弧门支座加固的计算、设计及施工措施。
This paper introduces the calculating, designing and construction methods of reinforcement of Chaoyang Temple Hydropower Station's arch-gate bracket.
就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。
Analysis for type selections of plate columns and packed columns in the design of the columns during revamp and expansion of the plant.
采用增容导线是提高线路输电能力的措施之一，具有良好的推广应用价值和前景。
To adopt augmented capacity conductor is the one of the measures for improving power transmission capability, and has good value and prospect of popularizing application.
实行电容补偿无功，补偿无功后的节容率是多少?电力用户可增容又是多少?。
This paper discusses such problems as how much the decreasing capacity rate is after reactive power compensation and how much the incremental capacity of power users is.
本文详细综述了通过共混法回收废旧混杂塑料的研究进展，并指出所用的增容技术。
Research in recycling of waste commingled plastics by blending is reviewed in detail and thecompatibilization methods are emphatically introduced in the paper.
如将设计水头提高到37.0米，水轮机发电机出力增容到5.0万千瓦是合理的。
When the design head was 37. Om, the electricity generated by turbine generator increased to 5.0 million KW, which was relatively reasonable.
提高现有输电线路的输送容量有两种方法，即静态提温增容技术和动态监测增容技术。
There are two methods for improving the transmission capacity of lines, static temperature-raising capacity-increase technology and dynamic monitoring capacity-increase technology.
DSC及SEM测试结果表明，少量增容剂的加入明显改善了原位复合体系的相容性。
The results of DSC and SEM show that the compatibility of in situ composites is improved markedly by adding a small amount of compatibilizing agent.
并提出了增容性优化算法，可以缩短装配节拍，从而达到提高了装配系统生产率的目的。
This paper proposes a scalable optimization algorithm, by which the tact time of the assembly line can be reduced, so the productivity of the whole system is increased.
分析了ABS用量和加工工艺对共混物性能的影响，讨论了ABS共混物的增容改性技术。
The influences of ABS and processing conditions on the properties of the blends are analyzed , and the techniques of compatibilization modification are discussed.
强调了新的优化紫外稳定性的方法包括接枝法、增容作用，可聚合性稳定剂和聚合物结合稳定剂。
New approaches for optimization of UV stabilization using grafting, compatibilization, polymerizable stabilizers and polymer bound stabilizers are emphasized.
强调了新的优化紫外稳定性的方法包括接枝法、增容作用，可聚合性稳定剂和聚合物结合稳定剂。
New approaches for optimization of UV stabilization using grafting, compatibilization, polymerizable stabilizers and polymer bound stabilizers are emphasized.
应用推荐