经循环流化床数值模拟的检验证明，新模型的计算结果与实验数据吻合，从而在稠密气固两相流动的数值模拟中具有相当的优越性。
In the numerical simulation of a CFB apparatus, the result of the new model agrees with the experiment data well, so it shows the remarkable advantage or simulation of dense gas-solid two-phase flow.
方法乙酰唑胺房水样品经固相萃取后，进行RP -HPLC检测。
MethodsUsing the solid phase extraction technique, acetazolamide was extracted from the aqueous humor, and detected by RP HPLC.
研究发现，经固相渗碳处理也可获得钴粘结相呈梯度结构的硬质合金。
It is found that cemented carbide with Co binder gradient can be fabricated by solid state carburizing.
聚对苯二甲酸乙二酯(PET)薄膜经固相缩聚反应后，用凝胶色谱法测定产物的分子量、分子量分布和环状齐聚物含量。
Polyethylene terephthalate (PET) films were polymerized in solid phase, the molecular weight, molecular weight distribution (MWD) and cyclic oligomer content of the products were determined by GPC.
研究了经不同的固溶和时效方案处理的7711铝合金的力学性能，并结合微观组织进行了分析。
The mechanical properties of 7711 aluminum alloy under different solution and aging conditions were investigated and analyzed by combining with the microstructure.
应用取向分布函数(odf)研究了3104铝合金经不同温度固溶及时效处理后的冷轧织构组态。
The cold rolling textures of 3104 aluminium alloys after solution and aging were studied by means of orientation distribution functions (ODFs).
为了准确采集井底温度，API于1984年成立了一个由13个固井专家组成的研究小组，经8年研究建立了新的注水泥温度相关表及温度测量方法。
A new table relating cementing temperature and a new temperature measuring method were established by an API group of 13 cementing experts organized in 1984 through 8 year continuous efforts.
而粗大的晶粒及连续的晶界容易产生应力集中，因此合金经固溶时效后具有较低的塑性和冲击值。
However, large grain size and continuous grain boundaries combine to produce stress concentrations, thus lowering the plasticity and impact value of alloy after solution and aging treatment.
结果表明，该合金经急冷处理后由于过饱和固溶铬含量的增加，导致空位浓度显著提高与空位盘的产生。
Results show that the supersaturated solidification Cr-content increases in the rapidly quenched alloys induced the great increase of vacancy density and production of vacancy plates.
试验结果表明：经微波染色或固色的织物，其上染率和色牢度普遍达到或高于常规水浴加热法染色；
Based on trials, the results showed that the dye uptake and color fastness of microwave dyed fabric were reached or higher than conventional process.
对比测定了经固溶处理和未经固溶处理锯条的锯切性能。
The cutting performances of saw blade by solution and non-solution heat treating were determined.
有必要探索由工业废铁粉经固相反应直接制取固体聚合硫酸铁的工艺。
It is necessary to research a new method of SPFS preparation by solid reaction process with industrial scrap iron powder.
应用固相多肽合成了BQ- 123和3个环肽，结构经质谱鉴定正确。
BQ-123 and 3 cyclopeptides were synthesized by solid-phase peptide synthesis (SPPS). The structures were established by MS.
结果表明，退火态2224铝合金经e CAP挤压后，进行固溶和时效处理，明显提高了合金的力学性能，细化了合金的晶粒。
It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP, the size of grain is refined.
蜂蜜样品用水溶解后，经正己烷-二氯甲烷提取，提取液经c18固相萃取小柱净化，采用气相色谱仪电子捕获检测器定量测定。
The honey samples were dissolved in water and acetone and then extracted with hexane - chloromethane, cleaned by C18 SPE cartridge, determined by gas chromatographic electronic capture detector.
固相产物以炭黑为主，经处理后可以作为炭黑回用或吸附剂使用。
The solid has a high fixed-carbon content and can be used to manufacture sorbent or carbon.
碳化硅粉末经压制成型后，在高温常压下固相烧结制成多孔碳化硅样品。
Sample of porous SiC polycrystals are prepared by solid sintering process under high temperature and normal pressure using moulding SiC powder.
尘螨浸液经SDS-聚丙烯酰胺凝胶电泳后，转移到醋酸硝酸纤维滤膜上使之固相化。
The mite extract was fractionated by SDS-polyacrylamide gel electrophoresis and then blotted onto acetic nitrocellulose sheets.
合成了一种季铵化反应性树脂无醛固色剂het，测定了该固色剂对羊毛织物经酸性红g染色后的固色效果。
Quaternized reactive formaldehyde-free color-fixing agent HET was synthesized, and its color fixation effect was tested for wool dyed with acid dye red g.
经发酵实验，分别确定了不同原料的最佳固形物含量、发酵时间、杀菌温度等影响因素。
Optimum solid content, fermentation time and sterilization temperature for each material in yogurt processing were determined.
结果表明，304奥氏体不锈钢经渗铬固溶渗氮复合处理后可获得性能优良的复合渗层，且耐磨、耐腐蚀。
The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti…
材料经固溶处理后析出物绝大多数都溶入基体。
Most precipitate dissolve into the matrix after solution treatment.
所有固相反应产物经元素分析和X射线粉末衍射法表征。
Elemental analysis and XRD are used to characterize the solid products.
经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。
Hard anodizing film could be obtained on Al-Cu alloy surface which had been treated with solid solution treatment and natural aging.
无机防火堵料，亦称速固型防火堵料，是以快干胶粘剂为基料，添加防火剂、耐火材料等经研磨、混合均匀而成。
Inorganic fire prevention sealing, also known as speed solid-type fire plug, is quick-drying adhesive based material, to add fire retardant, refractories, etc. After grinding, mix well made.
结果表明：经固溶处理的焊缝和热影响区，晶内奥氏体析出变少，晶粒尺寸变小，同时奥氏体的形状由长条状变为圆状。
The results show that the precipitated austenite crystals of welded joint after solid solution treatment are fewer, the grains are smaller. And the shape of austenite changes from strip to roundness.
针对矿浆悬浮液中的固液相性质，选择陶瓷微滤膜对已经经过预处理的矿浆进行过滤与脱水。经多次过滤后的陶瓷膜用正、反冲洗法进行冲洗并考察膜再生性能。
According to the characteristics of solids and liquid in the ore slurry, we chose the ceramic microfiltration membrane to filtrate and dehydrate the pretreated ore slurry.
经x -衍射分析粉煤灰中的含铁矿物主要是以赤铁矿和磁铁矿的状态存在，少量以磁赤铁矿、镁铁尖晶石以及镁铝铁氧化物的固熔体形式存在。
The X-diffraction analysis of fly ash showed that iron minerals were mainly hematite and magnetite, small amount of magnetic hematite, Mg-Fe spinel and Mg-Fe-Al oxide solid solution.
经x -衍射分析粉煤灰中的含铁矿物主要是以赤铁矿和磁铁矿的状态存在，少量以磁赤铁矿、镁铁尖晶石以及镁铝铁氧化物的固熔体形式存在。
The X-diffraction analysis of fly ash showed that iron minerals were mainly hematite and magnetite, small amount of magnetic hematite, Mg-Fe spinel and Mg-Fe-Al oxide solid solution.
应用推荐