得出膨胀力取决于限制膨胀的固体介质的弹性模量的结论。
We get the conclusion that the expansive pressure is determined by elastic modulus of the expanded solid medium.
实验结果表明,空间电荷在固体介质的预击穿过程中起重要作用。
Experimental results show that space charges play an important role in the Pre-breakdown of solid dielectrics.
利用固体介质活塞圆筒式高压容器测量白云岩与石灰岩的电导率。
The electrical conductivity of Beijing dolomite and limestone has been studied by means of a high pressure apparatus of solid medium piston cylinder type.
研究发现P波能在液体和固体中传播,然而S波只能在固体介质中传播。
And researches found that P waves traveled through both liquids and solids while s waves traveled only through solid matter.
酮与稳定膦叶立德在家用微波炉中加热,在无任何溶剂或固体介质条件下,4。
Ketones and stabilized phosphorus ylides were heated together in commercial microwave oven, under solvent and medium free conditions, the Wittig reaction finished within 4.
采用强流脉冲电子束轰击固体介质样品,研究了强流脉冲电子束与固体介质的相互作用。
In this paper, the interaction of intense pulsed electron beams with dielectric targets is presented.
岩石破坏时最大剪应力位于0.5倍喷嘴直径的径向距离处,同时在固体介质表面边缘产生最大拉应力。
The maximum cutting stress lie of the radial distance of 0.5 double diameter nozzle, while the maximum pull stress lie in the surface edge of the rock.
本文研究了各向同性固体介质中的二维非线性有限振幅纵波,采用有限元方法求解二维非线性纵波运动方程。
The 2-D nonlinear longitudinal wave in the isotropy solid medium studied in this paper is the finite amplitude wave, which thought about the nonlinear of the motion and medium.
80年代早期,HDW研发的,获得专利权的弧反射研发技术仍然是故障检测的高级方案,用于固体介质的电缆。
In the early 80's, HDW invented, patented and developed the Arc Reflection Technology, which continues to represent the state-of-the-art fault locating method for solid dielectric cables.
隔膜压力表采用间接测量结构,适用于测量粘度大、易结晶、腐蚀性大、温度较高的液体、气体或颗粒状固体介质的压力。
Divide by indirect measurement of pressure gauges, to measure the viscosity, easy to crystallization, corrosive, high temperature of the liquid, gas or granular solid media pressure.
通过测量超声波在固体介质中传播的纵波传播速度,进一步测量该固体的杨氏模量,得到了测量固体杨氏模量的一种新方法。
Solid Youngs modulus is determined by measuring the propagation speed of longitudinal wave induced by ultrasonic wave in solid media.
通过测量超声波在固体介质中传播的纵波传播速度,进一步测量该固体的杨氏模量,得到了测量固体杨氏模量的一种新方法。
Solid Young's modulus is determined by measuring the propagation speed of longitudinal wave induced by ultrasonic wave in solid media.
和隔膜泵相比,单螺杆泵可输送各种混合杂质,含有气体及固体颗粒或纤维的介质,也可输送各种腐蚀性物质。
And diaphragm compared to single-screw pump can transport all kinds of mixed impurity containing gas and solid particles or fibers of the media, but also transport all kinds of corrosive substances.
固体颗粒介质成形新工艺,是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用,对金属板料成形的工艺。
Solid granules medium forming new technology (SGMF) is a technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to achieve the sheet forming.
闸板的斜面刀形边缘能够将杂质排出或切割流体介质中的固体颗粒。
The beveled knife like edge pushed aside or cuts through solids in the flow stream.
因为小弹簧容易被固体物堵塞,高粘度介质会使小弹簧轴向补偿移动受阻。
Because of the small spring easily plug solids, high viscosity medium will move in small delay compensation axial spring.
半筒型:当介质中含有固体棵粒或纤维状物质时,可选用半筒型结构,此种结构具有自洁及剪切功能。
Half tube type: when the medium containing solid particles or fibrous material, can choose a half tube type structure, this structure has the clean and shear function.
在强碱性介质中,“固体表面活度”很低,若二硫代碳酸盐浓度不大,则不能发生吸附。
In serious alkaline media, "solid surface activity" values are quite low and the adsorption can't take place therefore.
经典的传递过程理论结合多孔介质理论足以在基础层面上解决固体干燥问题。
Classical transport theory in porous media is sufficient for dealing with the solid drying process at a fundamental.
该方法允许使用固体单元来模拟声介质。
This method allows to model acoustic medium by using solid elements.
传感器使用固体材料作为传感器的传播介质,用新型的压电材料作为敏感元件,提高了灵敏度。
The sensor uses new solid material as transmission media and uses new piezoelectric material as sensitive unit, which raises the sensitivity.
介绍了固体颗粒介质成形新工艺,即采用固体颗粒介质代替刚性凸模(或弹性体、液体)的作用对板料进行软模成形的工艺,并阐述了新工艺的优点。
Solid granules medium forming technology is an advanced soft-tool forming technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to form sheet.
在流化床换热器中,固体颗粒在流化介质作用下保持流化状态,因此有着良好的传热性能,应用前景广阔。
The fluidized-bed heat exchanger within which the solid particles are kept in a fluidized condition by the fluid medium, so as to achieve a good heat transfer has a broad prospect for its application.
采用气体阻塞密封方案对含固体颗粒介质密封存在的问题进行设计改进。
Gas barrier seal was adopted in the seal device that is used to seal the medium including solid grain in order to improve its performance.
把固体染料激光器工作介质激射寿命的概念推广到液体染料激光器中,同时提出了一种针对液体激光染料激射寿命的双激光光路测试方法。
The concept of the lasing lifetime of working substance in the solid dye laser is promoted to liquid dye laser, and a twin laser beam testing method to measure the lasing lifetime is presented.
大气气溶胶是由大气介质和混合于其中的固体或液体颗粒组成的体系。
Atmospheric aerosol is a system consists of atmosphere and the solid and liquid particles suspended in it.
在涂料、颜料、填充塑料的生产过程中,固体颗粒在介质中的分散性能直接影响产品质量。
In the production of coating, colorant, and filled plastics, the dispersion of solid particles in the agent directly determines the product quality.
一维模型包括气体输运、多孔介质固体的辐射、导热和气固两相间的对流换热。
The one-dimensional model takes into account gas-phase transport, radiation, interphase heat exchange, and solid conduction.
一维模型包括气体输运、多孔介质固体的辐射、导热和气固两相间的对流换热。
The one-dimensional model takes into account gas-phase transport, radiation, interphase heat exchange, and solid conduction.
应用推荐