该模型能较好地应用于器件模拟。
表达式用MEDICI器件模拟软件进行了验证。
The expression is validated in Synopsys device simulation tools MEDICI.
主要讨论了亚微米半导体器件模拟的流体动力学模型方程的建立过程。
This paper presents the building procedures of hydrodynamic model for submicron semiconductor device simulation.
摘要：通过器件模拟的方法研究了载流子迁移率对有机太阳能电池性能的影响。
Abstract: the influence of the carrier mobility on the performances of organic solar cells was studied using the simulation method.
用单载流子器件模拟表明ITO经高频放电处理后降低了器件界面的空穴注入势垒。
Analogy of hole injection barrier indicates that the interface barrier of ITO is lowered after being treated with the high frequency discharge method using hole-only devices.
实例表明，在工艺优化设计和器件性能预测中用回归模型代替工艺-器件模拟具有较大的优越性。
The examples indicate that using regression model instead of process and device modelling is superior in process optimized design and device performance prediction.
半导体器件模拟，对于设计VLSI中的微小尺寸器件或者是新型的半导体分立器件，都已越来越显得重要。
Semiconductor device simulation has manifested its ever-increasing importance for the design of miniature devices in VLSI end new discrete devices.
本文在对半导体器件模拟过程分析的基础上，提出了目前广为流行的器件模拟软件面向对象的设计和开发方法。
Based on the analysis of the semiconductor device simulation procedure, this paper proposed a popular design method of the device simulation software.
采用AD I与高阶紧致差分相结合的方法计算大型非对称稀疏矩阵，并实现了该算法在半导体器件模拟中的应用。
In this paper, we apply ADI and high-order compact finite difference method for large-scale asymmetric sparse matrix in semiconductor device simulation.
介绍了一套砷化镓专用电路CAD软件，它可完成砷化镓器件模拟、器件模型参数提取、电路模拟、版图编辑、PG带生成的全过程设计。
The paper describes a CAD tool, it can perform GaAs device simulation, device parameter abstraction, circuit simulation, layout edition and PG tape generation.
介绍了总线控制器pci9054的桥式作用、用可编程逻辑器件模拟LOCAL总线侧cpu的设计、EEPROM的配置以及总线的数据传输操作过程，然后在此基础上给出了数据采集系统的设计。
It includes that the bus controller PCI9054 action, the simulation of the CPU design with CPLD on the LOCAL bus side, configuration of EEPROM and the bus operation of the data transmission.
如果不需要非易失性门，考虑使用器件共用在模拟和混合信号系统中：数字电位器(图1)。
If you need only a few nonvolatile gates, consider using a component common in analog - and mixed-signal systems: the digital potentiometer (Figure 1).
利用软件取代模拟和数字器件的数字化控制，提高了产品的集成度，增强了系统的柔性和智能性。
Digital control, in which software replaces analog and digital instruments, can increase the integration of the product, promote the flexibility and intelligence of the system.
分析和数值模拟了用瞬态简并四波混频实现光学啁啾反转的器件的主要参数对恢复信号波形和脉冲宽度能力的影响。
The influence of the principal parameters of optical chirp reversal devices on ability to restore signal wave form and pulse duration has been analysed and simulated.
由模拟器件构成的宽带正交解调接收机会由于正交通道的幅相不一致性造成整个系统的失真，进而影响整个接收系统的性能。
The system distortion is inevitable in wide-band analog quadrature receiver because of the existing of amplitude and phase errors, the performance of receiver become worse.
同时，一定要测试对器件性能。该模拟器不能用来评估绩效。
Also, be sure to test performance on the device. The Simulator can not be used to assess performance.
蒙特卡罗方法经常应用于新型器件的模拟，是分析、了解半导体器件的有力工具。
The Monte Carlo method is often used in novel device simulations. It provides a useful tool for the analysis, and understanding of semiconductor devices.
为实现MEMS器件系统级的模拟，运用等效电路宏模型的方法建立相应的IP模型库单元。
To perform the simulation of MEMS devices at the system level, the macromodel of equivalent circuit are utilized to build the library unit of IP models.
通过分析雷达的显示信息、扫描方式及余辉特性，讨论了针对不同扫描体制显示器件的模拟方法。
Simulation methods for different scan pattern indicator is discussed by analyzing the radar display characteristics such as display information, scan type and afterglow feature.
开发工具包来承载协同安全M CU器件，模拟和评估安全生产和远程更新方案。
A development kit to host a Synergy Security MCU device to simulate and evaluate the secure manufacturing and remote update scenarios.
用有源器件构成的有源模拟电感代替蔡氏电路中的电感元件可以产生混沌而不影响其性能。
Active simulated inductances, which replace simulated parts in Cais circuit, can produce Chaos, but not affect the property.
负责模拟器件测试项目的开发和改进。
Responsible for the analog devices' test program development and improvement.
量子器件模型的建立与计算机模拟对于实验有着重大的指导意义。
The formulation of quantum devices model and its computational simulation have important significance of guidance.
在设计上除模拟控制及总线驱动等器件外，尽量采用FPGA来实现控制逻辑以提供应用平台的可扩展性。
Except for the analogue controlling and bus driving devices, we use FPGA to implement controlling logic in order to provide expansibility of application platform.
介绍了一种基于可编程模拟器件的远程电子类实验系统。
This paper presents a remote electronic experiment system based on programmable analog device.
介绍了一种新颖的超低压保护器件的工作原理、结构特点，并进行了器件结构模拟。
This paper introduces the work principle and structure of new ultra-low voltage protection device, and the structure simulation.
用间接方法对典型数字器件的动态emp实验进行了模拟研究。
The research on simulation experiment of EMP coupling to dynamic typical digital devices is reported.
提出了一种采用数字电路技术，替代原来的模拟元器件控制音响的声道选择和音量调节的音响控制器。
In this article an audio controller, which USES digital circuit technology instead of original analogue components to control channel selection and volume adjustment, is proposed.
提出了一种采用数字电路技术，替代原来的模拟元器件控制音响的声道选择和音量调节的音响控制器。
In this article an audio controller, which USES digital circuit technology instead of original analogue components to control channel selection and volume adjustment, is proposed.
应用推荐