叶轮有双吸和单吸两种吸液方法。
Impeller has a single suction and double suction two suction fluid ways.
骨髓吸液易抽，示红系增生为主。
Easily pumped liquid bone marrow aspiration showed erythroid hyperplasia mainly.
活动吸液罩属于一般化工机械设备。
The utility model relates to a movable sucking cover which belongs to general chemical engineering machinery.
吸液性能是吸液原纸的一项主要性能指标。
Absorbability is an important property of waterleaf base paper.
目的研究模拟根管中标准纸尖的吸液性能。
Objective To study the absorbent properties of standard paper point in simulant root canal in vitro.
对各种墙壁的喷洒消毒剂溶液不宜超过其吸液量。
To all sorts of wall spray disinfectant solution is unfavorable exceed its to absorb fluid amount.
作者应用腮腺导管内吸液涂片观察脱落细胞情况。
The author used smear from Stensen, s duct aspiration to observe exfoliated cytology in order to help diagnosis of early mumps.
目前在国内对无吸液芯径向热管还没见到相关的报导。
There are few reports about radial heat-pipe without wick so far.
毛细运移测试是水和油进入岩石的吸液位势的一种比较。
An imbibition test is a comparison of the imbibition potential of water and oil into a rock.
对吸液率测定中浸泡用水量和浸泡时间的影响作了探索。
The present situation of liquid absorption rate of super water absorption polymer and its measurement method has been summarized.
对吸液率测定中树脂浸泡用水量和泡时间的影响作了探索。
Soak to have done experiment research with water quantity and the influence of soaking time to absorbing the resin in the liquid rate measurement.
该种结构的便携式吸液器成本低廉、结构简单、使用方便。
The portable liquid-sucking device of the structure has the advantages of low cost, simple structure and convenient use.
目的研究重力和粘度因素对模拟根管中标准纸尖吸液性能的影响。
Objective To investigate the effect of gravity and fluid viscosity on absorbent properties of standard paper points in simulant root canals in vitro.
本文对烧结青铜粉末吸液芯—水热管的传热性能进行了试验研究。
The present work gives an accaunt of the experimental investigation on the heat transfer performance of a filled-water heat pipe with the sintered bronze powder wick.
本发明提供一种吸收性物品，能够抑制吸液性混合物的形状溃散。
It is intended to provide an absorbing article in which a liquid-absorbing mixture is prevented from deformation.
研究了不同单体组成对微球的共聚组成、吸液性能和颗粒形态的影响。
The influence of monomer composition on copolymer composition, absorption characteristics and microsphere morphology was investigated.
其中热管吸液芯分别采用普通不锈钢丝和反向槽道毛细结构，分析其工作性能。
The performance of the wick is analyzed with two wicks which is normal wire-mesh screen and reversed groovy capillary structure.
考察了产物对蒸馏水、食盐溶液以及模拟尿的吸液能力、吸液速率和保水能力等性能。
The authors also investigate such properties as liquid absorbability, absorption rate, water retention of the product to distilled water, salt solution and imit…
五种热管带有不同吸液芯结构：微肋、丝网芯、加网芯微肋、金属粉末烧结芯及光滑表面。
The 5 miniature heat pipes have different wick structures including the inner spiral grooved, wire meshes, inner spiral grooved with wire meshes, sintered metal powders, and smooth surface.
实验结果表明：随着外部盐溶液浓度的增大及盐离子的价态的升高，复合材料的吸液率下降；
The water absorbency was descended with the ascending of the concentration of the external ion solution and the valence of the ion.
仪器具有自动吸液，自动注液，自动测定及自动排废液功能，容量滴定值有LED数字显示。
It can absorb and transfuse liquid automatically Measure the end-point automatically, and show titrimetry value by LED digital display.
目前电子芯片对散热的要求越来越高，烧结式吸液芯微热管已经成为电子芯片理想的散热元件。
With the increasing demand for the cooling of electronic chips, the micro heat pipe with the sintered wick has become an ideal heat radiator.
使用100目金属筛网以自然过滤法测定高吸水树脂吸液倍率随吸液时间的变化，求出树脂吸液速率。
The filtration method with 100 mesh sieve was used to measure the absorption time dependence of water-absorbency, then the LAS was derived.
该方法及专用设备与现有技术相比，具有渗透深度大，吸液量多，产品质量好和操作安全可靠等优点。
Compared with the available technology, said invention features deeper permeation depth, more liquid absorbed, better quality of product, safety and reliable operation.
分析了吸液率的测量原理，对测定装置控制系统的硬件结构、软件设计和HMI画面组态进行了较详细的说明。
The detail of its control system on hardware configuration, software design and HMI pictures configuration have been illustrated.
高吸水纤维的吸液倍率随丙烯酰胺用量的增加先增大后减小，丙烯酰胺用量为单体重量的25％时吸液倍率最大；
The absorbency increased first and reduced then as the content of AM increased, it got the maximize when the content was 25% of monomer.
熔渣覆盖降低了钢液吸氮速度。
The covered slag reduces steel fluid attracting nitrogen speed.
注射器吸满漱口液，接上针头，排出注射器内空气。
Fill the syringe with solution, attach the needle and expel air.
注射器吸满漱口液，接上针头，排出注射器内空气。
Fill the syringe with solution, attach the needle and expel air.
应用推荐