铁及非合金钢的其他条、杆。
用于铸铁碳钢不锈钢和低合金钢的焊接。
还能够抑止合金钢由于火而惹起的脆性。
Can also restrain the alloy steel as the fire caused brittle.
另一种常常用来制作工具的合金钢是不锈钢。
Another type of alloy steel frequently used for tooling applications is stainless steel.
合金钢车身，稳定性更高，任凭摔打不易损坏。
Alloy steel body, higher stability, let the beat is not easy to damage.
碳钢和低合金钢在污染环境下的大气腐蚀规律。
Atmospheric corrosion of carbon steel and low alloy steel in polluted environment.
活动部件是由合金钢制成，并且在滚珠轴承上运行。
The moving parts are made of alloy steel and run on roller bearings.
其他合金钢丝。
齿轮材料选用高级低碳合金钢，使用自动化高温渗碳淬火处理。
Top low carbon alloy steel as gear material, adapting automatic carburizing and quenching heat treatment.
以材质划分为：碳钢、铸钢、合金钢、不锈钢、铜、铝合金等。
The material is divided into: carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy.
黑色工具材料以铁为基材，包括工具钢，合金钢，碳钢，铸铁。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
结果表明，以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
阀体和内件由高温合金钢制造，其特点是高温下耐磨和阀体寿命长。
The valve body and internals are made from high-temperature alloy which features high-temperature abrasion resistance and long service life.
研究了稀土-钛-氮复合变质处理对高硼合金钢组织和性能的影响。
The influence of rare earth, titanium and nitrogen on the structures and properties of high boron alloy steel was researched.
钢材大致可分为四类：炭素钢，合金钢，高强度低合金钢和不锈钢。
There are four broad classifications of steel: carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
加进下列一种或几种元素可制成各种合金钢：镍、钨、硅和少量别的合金元素。
1 alloy steels are formed by the addition of one or more of the following elements: nickel, tungsten, silicon, and small amounts of other alloying elements.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
由于合金钢改善的物理性能，它们被大量使用在许多碳钢不适用的地方。
Because of their improved physical properties they are used commercially in many ways not possible with carbon steels.
而假如变紫红色：无磁性的为高锰钢，有磁性的通常为通常钢或低合金钢。
And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.
用于铸铁、碳钢、合金钢、不锈钢的切削和磨削加工，尤其磨剂效果甚佳。
For cast iron, carbon steel, alloy steel, stainless steel cutting and grinding processing, especially the grinding effect is very good.
合金钢：指钢中含有铁，碳，以及镍、铬、钼等一种或多种其他的合金元素。
ALLOY steel: a steel containing iron and carbide plus one or more other metals such as nickel, chromium, or molybdenum.
合金钢材料，表面镀镍，全密封焊接，防油、防水、耐腐蚀，可适用于各种环境。
Alloy steel, nickel plated, hermetically welded oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments.
适用于中高抗张强度金属材料的磨削，如一般碳素钢，合金钢，可锻铸铁，硬青铜等。
Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.
应用元胞自动机模型对合金钢表面氮化及扩散层中氮化物沉淀过程进行了计算机模拟。
Simulations of surface nitridation and nitride precipitation in alloy steels have beeb carried out with cellular automaton modeling.
我是说，从青铜时代到钛合金钢，人类取得了巨大的进步，可是从那以后呢？ ---再没有了。
I mean, from the bronze age up to titanium alloy steel you had all this amazing progress, and since then — nothing.
合金钢在大部分工具上通常不使用，由于它会增加成本，除了一些特殊应用的已知优点。
Alloy steels are not normally used for most tools due to their increased cost, but for some have found favor for special applications.
在进行碳钢及低合金钢的焊接时应进行预热。预热温度在焊接开始到结束期间应保持均衡。
Preheating shall be carried out for carbon and low alloy steel welding where required. Preheating temperature shall be kept uniform from the start to the end of welding.
在进行碳钢及低合金钢的焊接时应进行预热。预热温度在焊接开始到结束期间应保持均衡。
Preheating shall be carried out for carbon and low alloy steel welding where required. Preheating temperature shall be kept uniform from the start to the end of welding.
应用推荐