不使用流作用域持久化上下文对象的web流中的持久化编程也是可行的，只是有很多障碍和缺陷。
Programming persistence in Web flows without the flow-scoped persistence context object is still feasible but incurs many hurdles and pitfalls.
分析了流态化闪速焙烧炉由烧重油改烧焦炉煤气的可行性和必要性，介绍了改造方案，探讨了改造后的安全问题。
The feasibility and necessity of replacing heavy oil by coke oven gas for liquid flash calciner are analyzed, the reform scheme is introduced, and the security problems after reform are discussed.
根据安全阀的实际结构和参数，利用三维建模软件Proe，结合计算数学模型的可行性，建立了安全阀流道的三维几何模型。
The 3-d geometrical model of relief valve was built by using PROE software, according to its actual structure and parameters as well as feasibility of computational mathematical model.
作为探索性研究，非恒定流模型是可行的，有发展潜力的。
As an exploratory research, unsteady flow model is feasible and potential.
试验结果证明该方法是可行的，得到的转子出口流场数据是可信的。
The experimental results demonstrate the experimental method is feasible, and the flow field data measured behind the rotor are believable.
结果表明，用并流的双液相溶剂一步从油菜籽中同时提取油和硫甙是可行的，可大大简化流程。
The results showed that it was feasible to leach oil and remove glucosinolates simultaneously from Chinese rapeseed within a leaching apparatus.
应用光一电检测方法测量气一固两相流中固体微粒浓度、速度，是一种十分有效和可行的方法。
The optical-electrical measurement is an effective and feasible way to measure solid particle concentration and velocity in gas-solid two phase flow.
分析了它们用于传输实时流的可行性。
Then their feasibility for real-time streaming transmission is analysed.
为了证明自定义工作流模型系统的可行性，本文在最后设计了一个WEBOA公文审批系统作为原型系统的开发实例。
To prove the feasibility of the designed workflow model system, the paper designed a WEBOA document examine and approve system as the development instance of the prototype system.
通过将HGIS、GIS、AIS设备的特性进行对比，论述了TA一次注流试验在HGIS设备和GIS设备中的必要性和可行性。
By comparing the characteristics of HGIS, GIS, AIS equipments, the necessity and feasibility of TA primary side injection current test in HGIS and GIS equipments were discussed.
同时说明了基于节点控制的工作流自动化是中小城市房地产管理OA系统的可行实现方案。
Workflow automation based on control nodes is proved to be a feasible scheme of the real estate management OA system suitable for middle and small cities.
实际流片结果表明该模型切实可行。
但在通常情况下，由于程序中不可执行的语句或路径的存在，使得基于数据流的测试准则不可行。
But because of the infeasible statements and paths in some programs, most data flow testing criteria are not applicable.
结果表明：采用旋转气流及用改变旋流强度的方法来调节低压油烧嘴的火焰长度是切实可行的。
It has shown that adopting revolving air flow and adjusting the flame length by changing the strength of revolving for low pressure oil burners is feasible.
研究结果表明，在短的鼓泡塔中，应用全混流模型来描述气相和液相的流体状态是可行的。
It is also indicated that the complete mixing model is feasible to describe the fluid flow states in both gas and liquid phases in a short bubble column.
运用流体力学仿真软件对传感器排水罩的排水效果进行了流场模拟，验证了排水罩结构设计的可行性。
The flow field of the drainage cover of the sensor was simulated by using a fluid mechanics simulation software, the feasibility of drainage cover structure design was validated.
通过工业性生产试验验证了利用普通圈流磨系统生产HPC超细活性掺合料的可行性，为矿渣的进一步开发利用提供了一条新途径。
Industrial tests verified that there is a possibility to produce HPC superfine additives with ordinary closed-circuit grinding system and provided a new way to further utilize slag.
目的观察m -型彩色多普勒超声测定主动脉瓣返流(AR)的血流传播速度(FPV)估测AR程度的可行性及准确性。
Objective To evaluate the feasibility and accuracy of color M-mode Doppler flow propagation velocity (FPV) in assessment of the severity of aortic regurgitation (AR).
对二维流场的数值模拟例子表明，这种流场重建的方法是可行的。
Numerical simulation of two dimensional examples shows the possibility of using this method to reconstruct flow patterns.
本文理论和实验研究了通过改变回热器流阻进行直流抑制的可行性。
The possibility of utilizing regenerator flow resistance to suppress DC flow is theoretically and experimentally investigated.
该文对将工作流技术应用于订单分解问题的可行性与有效性方面进行分析的基础上，提出了基于工作流的订单分解方法。
On the basis of analysis on feasibility and validity of workflow technology for solving problems of order decomposition, a workflow based method for order decomposition is presented.
随后以碧流河水库为例，详细阐述了水库分类防洪预报调度规则的确定过程，初步验证了水库防洪分类预报调度设计方法的可行性。
Taken Biliuhe reservoir as an example, the flow for determining the classified dispatching rules is systematically illustrated, and the applicability of the proposed method is testified.
介绍了剩余气体束流剖面探测系统的工作原理和设计依据，描述了所设计的系统结构并进行了初步实验，证明了利用剩余气体探测束流剖面的方法是可行的。
The principle and the basis of design are introduced. The construction of the system and the preliminary test are given. The method of detecting beam profile by residual-gas is verified.
探讨了功率流分析在隔振设计中的可行性，以及功率流评估指标与振级落差指标之间的内在联系。
The practicability analysis of the power flow evaluation criterion and the relationship between the vibration level and transmitted power flow are presented.
报导了五流方坯连铸中间罐内流体流动状态的水力学模拟试验研究，其试验结果表明：在该中间罐内设置适当的控流装置形式对改善中间罐内流体的流动模式是可行的。
The water modeling of five - strand billet caster tundish was carried out. The result has showed the appropriate shape of flow control devices in tundish is feasible to improve flow pattern of fluid.
报导了五流方坯连铸中间罐内流体流动状态的水力学模拟试验研究，其试验结果表明：在该中间罐内设置适当的控流装置形式对改善中间罐内流体的流动模式是可行的。
The water modeling of five - strand billet caster tundish was carried out. The result has showed the appropriate shape of flow control devices in tundish is feasible to improve flow pattern of fluid.
应用推荐