变形观测资料是变形分析的依据。
The analysis of deformation is based on the observed deformation data.
介绍了材料变形分析和毛坯的设计方法。
This paper describes how to analyse the material deform and how to design the blanks.
金属材料的激光冲击变形分析及其实验研究。
Analysis and experiment on deformation of sheet metal by laser shock wave.
用该软件作滑坡变形分析,能取得满意成果。
Satisfactory results can be gained when using the software to make landslides deformation analysis.
得到的这种位移可作为各块体变形分析的基础。
The obtained displacements can be used for further deformation analysis of each tectonic block.
隧道围岩应力和变形分析是隧道设计的重要内容。
The stress and deformation analysis for surrounding rock of tunnels is an important task in tunnels design.
采用模糊聚类法进行变形分析具有一定的可探讨性。
To analyze the settlement deformation by utilizing Fuzzy Cluster method is worthy of discussing.
通过力学计算及结构变形分析,为系统设计提供参考。
Mechanical calculation and structural deformation analysis were performed in the system design.
岩石构造的稳定性:第5届不连续变形分析国际会议录。
Stability of rock structures: proceedings of the 5th International Conference on Analysis of Discontinuous Deformation.
惯性约束聚变靶场编组站大口径光学元件的热变形分析。
Thermal Transfiguration Analysis for the Large Aperture Optical Element of Switchyard in ICF Driver Target Area.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
结合相对运动参数,提出了一种逐渐趋近的变形分析方法。
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
并以TSGJ1离心转子为对象,进行了强度和变形分析。
The strength and the deformation of TSGJ1 centrifugal rotor were analyzed.
针对单点变形分析的局限性提出了整体变形分析的等值线法。
Considering the limitation of single point deformation analysis, the contour method for integral deformation analysis is put forward.
讨论了这些方法用于节理岩体不连续变形分析时的各自优势和不足。
The advantages and disadvantages of these methods for analyzing discontinuous deformation of jointed rocks are discussed.
介绍了薄壁深孔件加工中的变形分析和现代高速加工工艺的应用效果。
The machining distortion analysis of thin wall and deep bore element and the results applying modern high speed machining process are introduced.
根据二次预应力连续梁的施工过程,提出了施工阶段的应力和变形分析方法。
For the construction process of twice prestressed continuous beam, the stress analysis and deformation analysis method during construction stage is provided in this paper.
正确认识粉末烧结材料屈服函数形状和性质,对于其塑性变形分析有重要意义。
It is important to plastic deformation analysis for we to understand correctly the geometrical form and properties of yield function of sintered powder materials.
本文对平面应变情况下不可压缩橡胶类材料裂纹尖端弹性场进行了有限变形分析。
This paper contains an asymptotic finite-deformation analysis about the elastostatic field near the crack-tip in an incompress rubber-like material.
本文用块体系统非连续变形分析(DDA)方法,对岩石滑坡体进行动态稳定分析。
This paper USES Discontinuous Deformation Analysis (DDA) to analyse the dynamic stability of a rock slope slide.
岩相古地理研究中的有限变形分析,是一个尚未引起重视但又不可忽视的重要课题。
The finite strain analysis in the study of palaeogeography is a new problem to which little attention has been paid but which should not be ignored.
根据膨胀土路堤瞬态渗流分析的结果,进行膨胀土路基与路面结构的协调变形分析。
According to the analysis of transient influent in expansive soil embankment, the compatible deformation between the expand soil embankment and the pavement upon it have been analyzed.
针对某行星变速机构复合排行星齿轮和滚针轴承进行了受力变形分析和损伤率计算。
The paper analyzed the deflection of a compound planetary gear set and calculated the damage percentage of its roller bearing.
由于采用显式差分法,它尤其适合于材料的弹塑性、大变形分析以及施工过程的模拟。
Because of the application of explicit difference method, it is especially suitable to elastoplastic analysis, large deformation analysis and construction process simulation.
通过对金属复合轧制的变形分析,导出了多层金属复合轧制的包覆板坯厚度计算公式。
By the analysis of the deformation of metallic composite rolled products, a formula for calculating the thickness of covering slab for multilayer metallic composite rolling is derived.
对整个结构进行了变形分析,找出了其在危险状态下的最大位移,明确了其刚度状况。
Analyzing the deformation of entire structure, finding the most displacement in danger status then knowing the status of stiffness.
在此基础上编制了相应的计算程序并将其应用到混凝土基础与地基相互作用的变形分析。
The problem of interaction of the concrete foundation and the elastic base was analyzed to illustrate the application of the proposed method.
讨论了建筑物变形监测系统的布设,变形观测的基本内容、方法、数据处理及变形分析。
The layout of the system, the basic constituent items, operations, data processing of the observation and the analysis of deformation are also comprised.
考虑海床变形,通过海床和管道的变形分析,给出这种接触条件的真实背景和使用条件。
Considering seabed deformation and pipeline bending, the true background and limitation of the contact condition are given in this paper.
考虑海床变形,通过海床和管道的变形分析,给出这种接触条件的真实背景和使用条件。
Considering seabed deformation and pipeline bending, the true background and limitation of the contact condition are given in this paper.
应用推荐