它也被用作酵母去发泡剂。
将蛋清搅打至硬性发泡，混入蛋糕料中。
负责研究的科学家表示：“这种钛发泡材料的机械性能与人体骨骼非常类似。”
"The mechanical properties of titanium foams made this way closely approach those of the human bone," said Quadbeck.
此外，动脉血管还会变硬，弹性的动脉变成“发泡胶管”，从而导致血压升高和加重心脏负担。
In addition, artery walls can stiffen, transforming compliant arteries into conduits like "Styrofoam tubes," Dr. Donohue says, that increase both blood pressure and the workload on the heart.
用梯温炉法确定了泡沫玻璃的发泡温度。
This article obtained foam temperature of foam glass by means of gradient furnace.
这一定是发泡棉做成的！
加入砂糖，每次一大勺，将蛋白打发到硬性发泡。
Add sugar, 1 tablespoon at a time, whip until they form stiff peaks.
以自制复合型蛋白质为发泡剂，制备泡沫混凝土砌块。
The foam concrete block was prepared by self-made compound protein foam agent.
确定了描述不同气体来源引起发泡现象的发泡特性参数。
The foaming parameters for description of the foaming processes caused by difference gases were determined.
粉末冶金发泡法是目前泡沫金属研究领域的一个热点方向。
Powder metallurgical foaming method becomes an important research aspect in the field of metallic foams.
它可以制成板材、珠粒和固体形式，可以发泡、注塑和挤塑。
It can be manufactured in sheet, bead, and solid forms and can be foamed, injection-molded and extruded.
隧道防火涂料主要由粘结剂、耐火填料、发泡材料和助剂组成。
Tunnel fire coatings consists mainly of binder, refractory fillers, foaming material and additive composition.
以建筑石膏、水泥为原料，采用复合发泡剂发泡制成墙体材料。
Wall body material has been made by using hemihydrate gypsum, cement and composite foamer.
粉末实体发泡法泡沫铝制备工艺包括混合、压制和发泡三个过程。
Powder compact foaming process for producing aluminum foams consists of mixing, compacting and foaming.
发泡墨：发泡印刷用的油墨。加热到某一温度时就会膨胀的油墨。
Blister ink: ink which will blister when heated to a certain temperature. Used FOR blister printing.
采用进口聚氨酯整体发泡保温，超高性能保温，极大降低运行成本。
Using imported polyurethane integral foam insulation, ultra high performance insulation, greatly reducing operating costs.
结果证实，用发泡特性曲线来指导连续挤出发泡配方设计是可行的。
The results showed this curve may be feasible to guide the formulation design for continuous foam extrusion.
随发泡剂用量的增加，环氧基发泡材料的力学性能存在临界转变点。
With increasing the volume of vesicant, the mechanical properties of epoxy foam material had a critical transit point.
用SKC-2000型光透过式粒度分布测试仪测试发泡剂ADC粒度。
The grain size of foaming again ADC can be tested with SKC-2000 grain size testing instrument.
该方法使用压力-能量曲线来研究缓冲包装用发泡聚乙烯的动态缓冲性能。
The stress-energy curve was used to study the dynamic cushioning characteristics of EPE.
热塑性弹性体组合物，发泡产品，以及所述组合物或发泡产品的制备方法。
Thermoplastic elastomer composition, foam product, and process for production of the composition or foam product.
简述了泡沫沥青的发泡原理，提出了沥青发泡特性的评价指标和影响因素。
The principle of bitumen foaming, the evaluation parameters and the factors influencing foaming characteristics are introduced in this paper.
介绍了梯温炉的结构及原理，根据测量结果绘制了发泡温度与泡径的关系曲线。
The structure and measuring principle of gradient furnace were introduced, and the curve of the foam temperature and bubble diameter was drawn.
老板教我如何将发泡牛奶做得浓稠，能让汤匙在上面待上30秒钟后，才浸入咖啡。
The boss taught me how to foam the milk so thick that the neck of the spoon rested on top, and took 30 seconds to sink into the coffee below.
可堆叠的发泡方块(又名sugarcubes)，以供快速创建和调整工作空间，包括墙和座位。
Stackable foam cubes (sugar cubes) to rapidly create and modify work Spaces including walls and seating.
探讨了聚酯多元醇、泡沫稳定剂、发泡剂及催化剂等原料对硬质聚氨酯泡沫塑料制备的影响。
The influence of some raw materials such as polyester the uniformity vesica nt foams and catalysts to the preparation of rigid polyurethanes foam is also discussed.
本文探讨了分散剂、超声波分散时间、搅拌取样等因素对发泡剂AD C粒度测试值的影响。
This paper probes into the influences of such factors as dispersing agent, ultrasonic dispersion time, and stirring sample on the value of the grain size of foaming agent ADC.
本文探讨了分散剂、超声波分散时间、搅拌取样等因素对发泡剂AD C粒度测试值的影响。
This paper probes into the influences of such factors as dispersing agent, ultrasonic dispersion time, and stirring sample on the value of the grain size of foaming agent ADC.
应用推荐