主要产品有:汽车、摩托车、船舶发动机凸轮轴,油泵凸轮轴及新型干法水泥生产线的熟料槽式输送机及铸钢件铸铁件等。
Main products: automobiles, motorcycles, ships camshaft engines, pumps camshaft and new dry cement clinker production line conveyor trough Iron and Steel Castings and other.
拆解报废的发动机就会发现推杆无一例外地存在严重的麻坑及从凸轮轴凸轮脱落的金属磨屑。
On stripping down a damaged motor, the tappets are invariably found to be heavily pitted and bits of metal broken off the camshaft lobes.
使用滚柱挺杆或滑动挺杆来传动旋转凸轮轴做上下快速提升动作(开启和关闭发动机的进气阀和排气阀)的现代型汽车发动机似乎不会出现上述自动熄火的情况。
Modern car engines that use rolling or sliding tappets for transmitting the rapid up-down lifting motion of the spinning camshafts—to open and close the engine’s inlet and exhaust valves—seem immune.
发动机制造商称较30年前相比,他们发现这三年破车出现同样的凸轮轴磨损情况有所增加。
Engine builders say they have seen more broken motors suffering from the same camshaft damage over the past three years than in the previous 30.
那金属轴叫凸轮轴,翣在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
那金属轴叫凸轮轴,在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
凸轮轴是汽车发动机的重要零件。
Camshaft is one of the important parts on the automobile engine.
一些高性能发动机有两个单独的凸轮轴,分别负责开关进气门和排气门。
Some high-performance engines have two separate camshafts, one for each set of inlet and exhaust valves.
在发动机中,凸轮轴上的凸轮控制进气门和排气门的开启和关闭。
In the engine, cams on the CAM shaft cause the intake and exhaust valves to open.
点火包包含个人线圈,线圈被直接安装到火花塞和被放于墨盒里,位于发动机的凸轮轴之间。
The ignition pack consists of individual coils that are mounted directly onto the spark plugs and are housed in a 'cartridge' , located between the engine's camshafts.
因为发动机没有阀门,它不需要任何凸轮轴、起阀器等。
Since the engine has no valves, it doesn't need any camshaft, valve lifters and so on.
当您启动发动机的时候,可以更快地把机油泵送到轴承和凸轮轴上,从而能够更迅速地保护发动机。
Allows faster pumping of oil to the bearings and camshaft for greater protection when starting your engine.
凸轮轴是发动机的关键零部件之一,其轮廓精度直接影响到发动机的性能和寿命。
Camshaft is one of the key components of the engine, and its contour accuracy has a direct impact on performance and life of the engine.
凸轮轴和挺杆体是发动机的重要零件,它们的状况直接影响着发动机能否正常工作。
Cam shaft and tappet body are important parts of engine, their status will influence directly whether or not the engine could make normal operation.
凸轮轴是汽车、摩托车、机械制造等行业的一种量大而广的机械零件,是发动机的关键零件之一。
Camshaft is one of the key parts of the engine, which is widely used in automobiles, motorcycles, and other machinofacture industries.
在发动机里,机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
除了顶置凸轮(OHC)发动机以外,凸轮轴都安装在气缸体里面。
The camshaft also fits inside the block, except on overhead-cam engines (OHC).
介绍一种用于双顶置凸轮轴式发动机的采用两级谐波传动的新型进气凸轮轴调相机构。
A new camshaft-phasing mechanism with twin harmonic drives is described and illustrated, which can be adopted to DOHC (double overhead camshaft) engines.
可以广泛应用于四气门双顶置凸轮轴结构的发动机。
The fastening structure can be widely applied in engines which adopt four-valve double-overhead camshaft structures.
使用滚柱挺杆或滑动挺杆来传动旋转凸轮轴做上下快速提升动作(开启和关闭发动机的进气阀和排气阀)的现代型汽车发动机似乎不会出现上述自动熄火的情况。
Modern car engines that use rolling or sliding tappets for transmitting the rapid up-down lifting motion of the spinning camshafts-to open and close the engine's inlet and exhaust valves-seem immune.
凸轮轴是汽车发动机配气机构的一个非常重要的机械部件,它的加工精度直接影响到汽车发动机的整体性能。
Camshafts play an important part in the valve train of engine, their accuracy of finish can affect the unitary performance of engine.
上海别克V6发动机配气机构为气门顶置、凸轮轴上置式,以齿形皮带同步传动。
The valve mechanism of the V6engine of passenger car BUICK is overhang valve, overhang camshaft type ad driven synchronized with tooth-shaped belt.
大多数推杆发动机和一些顶置凸轮轴发动机都有链。
顶制凸轮轴结构的汽车发动机都配备了正时皮带,并且这个皮带的生命周期是有限的。
Supplier Dynamic Selection Mechanism of Automobile Industry Based on Different Phase of Product Life Cycle;
顶制凸轮轴结构的汽车发动机都配备了正时皮带,并且这个皮带的生命周期是有限的。
Supplier Dynamic Selection Mechanism of Automobile Industry Based on Different Phase of Product Life Cycle;
应用推荐