聚合反应温度提高，聚合速率加快。
Polymerization speed increases with the increase of reaction temperature.
给出了最佳反应温度和反应时间。
反应温度过高或过低，碳纳米管的产率都很低。
A comparative study showed that the yield was low when the reaction temperature was too low or too high.
闪速炉的反应温度直接影响产品的产量和质量。
The reactive temperature of flash stove directly influences the product's quantity and quality.
通过试验，确定了合适的反应温度和反应时间。
The proper reaction temperature and time are determined in the experiment.
研究了催化剂和反应温度等因素对反应的影响。
The effect of catalyst and temperature on the reaction were studied.
研究反应温度和气体流量对磷化氢净化效率的影响。
The influence of reaction temperature and gas flow rate on purification efficiency was studied.
考察了反应温度、磺化试剂用量对磺化反应的影响。
The influences of reaction temperature and amount of sulfonating agent on sulfonating reaction were investigated.
探索了催化剂、阻聚剂和反应温度对水解反应的影响。
The effect of the catalyst, inhibitor and temperature on the hydrolysis was also investigated.
研究了反应温度、溶剂、催化剂及用量对预聚反应的影响。
The influence of reaction temperature, used solvents and catalysts on the prepolymerization reaction was investigated.
同时还讨论了反应温度和氯化物浓度对金属沉积速度的影响。
The effects of reaction temperature and chloride concentration on the deposition rate of metal are also discussed.
考察了空速、进料浓度、反应温度等因素对催化剂活性的影响。
The effect of space velocity on catalyst was studied as well as concentration and temperature.
与经典方法比较，本文所述的方法反应温度较低，操作较为简便。
The method described here has been facilitated by lower reaction temperatures and simpler procedure compared with the conventional way.
研究结果表明：随着反应温度和反应时间的增加，反应速率加快。
Results showed that, with increasing temperature and time the rate of reactions rose.
研究了氯化钠焙烧中相反应温度及其它与钒转化浸出率的有关因素。
The effect of phase reaction temperature of salt roasting and other factors on vanadium recovery is investigated.
介绍了该涂料的生产工艺和配方，讨论了反应温度对其性能的影响。
Technological process and formula of the coating is presented and effects of reaction temperature on coating performance discussed.
讨论了封端剂用量、反应温度和时间等因素对封端反应的影响问题。
The effects of amounts of blocking agent, temperature and time on the blocking reaction were studied.
研究了反应时间、臭氧浓度和反应温度对HDPE氧化程度的影响。
Effects of reaction time, ozone concentration and reaction temperature on oxidation of HDPE were studied.
通过正交实验考察了反应时间、反应温度对聚乙烯醇酯化程度的影响。
The influence of reaction temperature and reaction time on degree of esterification were investigated.
考察了单体浓度，引发剂浓度，反应温度和时间等对共聚反应的影响。
The effects of monomer concentration, initiator, reaction temperature and time on copolymerization were studied.
有关反应温度、原材料配比等因素对反应的影响都进行了详尽的研究。
The factors which affect the reaction, such as reaction temperature and raw material ratio, have been discussed.
探讨了催化剂、溶剂、反应温度及反应物用量等对共氧化行为的影响。
The influence of catalysts, solvents, reaction temperature, dosage of the reactants on the co-oxidation were discussed.
在一定的反应温度范围内，提高反应温度有利于一些氢转移反应的进行。
Some hydrogen transfer reactions were favored by raising temperature in specific range of temperature.
文中简介了催化剂、反应机理，以及反应温度和进料流率对反应的影响。
The catalysts, mechanisms, effects of reaction temperature and reactant flow rate on the reaction were also described.
考察了反应温度、氧浓度、催化剂用量以及反应时间对苯甲醇氧化的影响。
Effects of reaction temperature, oxygen concentration, catalyst dosage and reaction time on oxidation of benzyl alcohol were investigated.
考查了反应温度、引发剂用量、反应时间和胶用量对接枝共聚反应的影响。
The influence of reaction temperature, initiator level. reaction time and rubber level on the graft polymerization was investigated.
并讨论了反应温度、反应物的摩尔比、溶剂的用量、反应时间对产率的影响。
And discussed the reaction temperature, the ratio of reagent, the solvent concentration, reaction time on the production rate.
讨论了介质碱性、溶剂、反应温度和反应时间等工艺条件对产物收率的影响。
The influences of medium alkalinity, solvents, reaction temperature and reaction time on the yield of the product were investigated.
叙述在环化反应温度下，用反应精馏法合成均三唑的方法。收率可达96％。
Sym-triazole is synthesized by reaction rectification under the temperature of cyclical reaction. The yield is 96%.
叙述在环化反应温度下，用反应精馏法合成均三唑的方法。收率可达96％。
Sym-triazole is synthesized by reaction rectification under the temperature of cyclical reaction. The yield is 96%.
应用推荐