双马来酰亚胺预聚会增加固化物的介电损耗。
The prepolymerization of bismaleimide can increase dielectric loss dissipation.
本文介绍了双马来酰亚胺树脂的改性原理及改性方法。
This article introduces the modification principle and toughening ways of BMI.
综述了近8年来烯丙基化合物改性双马来酰亚胺的研究情况。
This paper reviewed studies on the improvement of bismaleimide resins by modifying with allylic compounds during recent 8 years.
将尼龙6与改性双马来酰亚胺熔融共混形成合金以提高其热稳定性能。
Alloy of polyamide 6 and modified bismaleimide was prepared by melt blending to improve its thermal properties.
结果表明：乙烯基三乙氧基硅烷可用作硅线石和双马来酰亚胺复合体系的偶联剂。
The results showed that triethoxy vinyl silane can be used as coupling agent of Sa (Sillimanite) and BMI composite.
本文介绍了改性双马来酰亚胺树脂的分子结构与性能，及复合材料的模压成型工艺。
This text introduced molecular structure and performance of modified BMI resin, and mould pressing craft of the composite material.
用双马来酰亚胺对环氧树脂进行改性，然后用改性环氧树脂对聚氨酯泡沫塑料进行改性。
Epoxy resin was modified by bismaleimide resin in this paper, and polyurethane foam was modified by modified epoxy resin?
采用DSC方法研究rtm专用双马来酰亚胺树脂的固化动力学模型与固化动力学参数。
The cure kinetic model and kinetic parameters of BMI resin for RTM are studied by DSC.
用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。
The toughened BMI resins were made from the bismaleimides and o, o-diallyl bisphenol a and the analysis for the curing and thermal stability of the resins were also conducted.
石英纤维增强双马来酰亚胺树脂复合材料具有低介电损耗、耐高温、耐湿热及良好的力学性能。
Quartz fibre strengthen Bis maleimide BMI composite material have low to dielectric loss angle, able to bear high temperature, damp and hot, good mechanics performance.
研究了处理剂用量与玻璃微珠加入量对改性双马来酰亚胺树脂压缩强度及马丁耐热温度的影响。
The effects of the contents of KH-550 and ester titanate coupling agent and that of glass bead on the compression strength and Martin heat resistant temperature of bismaleimide(BMI)were investigate.
本文合成了烯丙基醚化酚醛树脂，并与双马来酰亚胺共聚，通过FTIR和DTA进行了性能表征。
Allyl ether phenolic resin was synthesised, then it was copolymerized with bismaleimide. Its properties were characterized by FTIR and DTA.
采用全动态dsc研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学，建立了固化动力学的唯象模型。
The cure kinetics of bismaleimides (BMI) resin system was investigated by dynamic DSC analysis and the phenomenological model was established.
采用浇铸成型工艺制备石墨填充双马来酰亚胺—6,6，-烯丙基双酚a树脂(BMI- DP)复合材料。
The composites of graphite filled bismaleimide 6, 6, diallyl bisphenol a (BMI DP) were prepared by casting method.
本文介绍了一种以改性双马来酰亚胺树脂为基体，高强度玻璃布和碳布增强的模具用先进复合材料的制备和性能。
The properties and preparation of a tooling composite material of bismaleimide resin modified with glass cloth and carbon cloth were introduced in this paper.
结果表明：合成的BDME共聚物可溶于低沸点溶剂体系，解决了双马来酰亚胺聚合物的溶解以及与环氧树脂共混时的相容性问题。
It was found that the synthesized polymer of BDME can dissolve the low boiling point impregnant system which could settle the problem both the diffluence of BMI and the consistence of BMI and EP.
研究了刚性聚醚酰亚胺（PEI）改性双马来酰亚胺（BMI）树脂体系粘度特性和凝胶特性，以及PEI/BMI/RS/玻纤复合材料的力学性能。
The viscosity and gel time of resin system of modified bismaleimide(BMI) resin with rigid polyetherimide(PEI) and the mechanical properties of PEI/BMI/RS/ glass composite materials were studied.
综述了二苯甲烷双马来酰亚胺的3种主要合成方法，讨论了若干合成工艺问题以及对产品质量的影响因素，介绍了BDM 产品的热行为特征与纯度、杂质的关系。
The three synthetic methods of bismaleimides and the some problems during synthesis and the thermal behavior of BDM products are reviewed with 34 references in this paper.
采用不同主链结构的含硼稀丙基树脂改性双马来酰亚胺（B MI）树脂，并对其预聚工艺、反应性、 固化树脂力学性能、耐烧蚀性能及玻璃布层压板性能进行了研究。
This paper studied the properties of modified resin, which is copolymering by BMI and different main chains of allyl resin containing boron. The composite of these resins was discussed.
采用不同主链结构的含硼稀丙基树脂改性双马来酰亚胺（B MI）树脂，并对其预聚工艺、反应性、 固化树脂力学性能、耐烧蚀性能及玻璃布层压板性能进行了研究。
This paper studied the properties of modified resin, which is copolymering by BMI and different main chains of allyl resin containing boron. The composite of these resins was discussed.
应用推荐