用X射线单晶衍射测定了该配合物的晶体结构。结果表明，配合物中锡原子呈五配位畸变三角双锥构型。
The crystal structure was determined by X ray single crystal diffraction, the structure is a distorted triangular bipyramid with five coordinated central tin atom.
双锥环以柔性石墨作垫片。
实验研究了熔烧温度对双锥光纤光学特性的影响。
Effects of the fusion temperature on optical properties of biconical fibers are experimentally studied.
内环锡和外环锡原子均为五配位的畸变三角双锥构型。
Both endo-cyclic and exo-cyclic tin atoms are five-coordinated and have coordination geometry of distorted trigonal bipyramid.
在该配合物的晶体中，锡原子呈五配位畸变三角双锥构型。
In the crystals of the complex, the tin atoms are penta-coordinated in a distorted trigonal bipyramidal configuration.
根据常规锥篮离心机的结构特点，提出新型双锥度锥篮离心机。
On the basis of the structural characteristics of the common conical basket centrifuge, a new centrifuge with double cone angles conical basket is put forward in the paper.
介绍了双锥回转真空干燥机的一种改良型机种——气提式双锥干燥机。
The stripping double cone dryer, an improved double cone rotating vacuum dryer, was presented.
本文对树脂基复合材料双锥防热套的原材料选择和成型工艺进行了研究。
This paper discusses the raw materials and process technology of the double cone ablative shield made from resin matrix composites.
本实用新型是一种适用于安装在燃气器具排烟管出口的双锥风动防风帽。
The utility model relates to a double-conical pneumatic wind-proof cap, which is suitable for being installed at an outlet of a fume discharging pipe of a gas appliance.
分析了水平式双锥盘冲击粉碎机理，对锥盘内单个颗粒运动轨迹进行了分析。
The movement track of particle inside the dual-cone disk impact mill is analyzed both in theory and experiment.
配合物(4)中的锡原子为五配位，构成以锡原子为中心扭曲的三角双锥构型。
In the molecular structure of complex (4), Sn atoms are five-coordinated and present the distorted trigonal bipyramidal geometry structures.
双锥型变截面矩形钢管是指两端为锥型变截面、中间为等截面的组合矩形钢管构件。
Double-tapered rectangular steel tubes are composed of two tapered ends and a prismatic intermediate part.
我们已成功地研制了微波双锥取样器，本文对研制中的关键技术和调试方法进行介绍。
A biconical sampler for microwave instrumentation has been successfully studied and manufactured. The main manufacturing and adjusting methods are described.
采用风洞试验和工程计算相结合的方法，对球双锥类外形的稀薄过渡流区气动特性进行了研究。
Experiment and engineering approach have been applied to research aerodynamic characteristics of rarefied transitional flow around sphere-bicone configuration.
双锥取样器是一种超宽频带的取样器件。本文进行了理论分析、给出了设计公式及其某些测试结果。
The biconical sampler is an ultra-wideband sampling device. The present paper performs the theoretical analysis, presents the formulas of design and some test results.
对某冲压增程弹用超声速双锥进气道流场特性进行研究，在风洞试验中得到合理的流场结构图谱及试验数据。
Flow characteristic of supersonic bi-cone inlet of ramjet assisted range projectiles is studied, and reasonable flow structures are also achieved through the wind tunnel experiment.
利用耦合模理论分析了在双锥光纤耦合区中声光的相互作用，讨论了在不同耦合区半径下扰动周期与声波频率的关系。
The acoustooptic interaction in biconical optical fiber was analyzed based on coupled mode theory, and the relationship between perturbation period and flexural wave frequency was discussed.
双反射带通箱，由于它的导向孔在很大的频率范围内控制了锥盆动作，所以产生的失真最小，同时还表现出最好的功率承受特性。
The dual-reflex bandpass, due to the fact that its ports control cone motion over a wider range of frequencies, produces the least distortion and exhibits the best power-handling characteristics.
单襟翼取代了原本双襟翼的设计，同时主体上方额外的翼端帆长度也增加，现在几乎要碰到鼻锥。
A single flap replaces the previous double design and the additional winglets over the main profile have increased in length, almost reaching the side of the nosecone.
例如，人们普遍认为，内源性大麻素抑制多巴胺的释放和减少锥细胞和双极细胞释放突触前递质。
For example, there is general agreement that cannabinoids suppress dopamine release and presynaptically reduce transmitter release from cones and bipolar cells.
用有限元方法，对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算。通过应力计算结果的分析，得出了凸、凹两齿侧应力沿齿长的分布规律。
Through the calculation of the finite element method(FEM) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained.
双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。
Its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.
论文工作为今后双圆弧弧齿锥齿轮的进一步研究及推广应用提供了参考依据。
This paper provides reference for later research and application of double-circular-arc spiral bevel gears.
通过在单芯光纤和双芯光纤焊点处进行熔融拉锥的方法，实现了这种新颖的耦合技术。
By way of splicing and tapering at the fusion point of one-core single mode fiber and the two-core single mode fiber, an effective coupling technique is implemented.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
用同一双面刀盘在格里生机床上成功地切出了等高齿双圆弧弧齿锥齿轮副。
By using the same alternate blade cutter, bi-arc spiral bevel gear pair with equal-height tooth can be produced on the Gleason machine.
应用推荐