对双剪统一屈服准则所表征的材料屈服极限和滑移面方向特性作了分析。
Two aspects of the yield limits and the slip directions for materials in the twin-shear unified yield criterion are analyzed in this paper.
由此可见，双剪统一屈服准则尚不能很好地描述材料屈服时的滑移特性。
So it is summarized that the twin-shear unified yield criterion could not give a proper descriptions to the slip characteristics for the materials when yielding.
岩土类材料强度理论分为单剪强度理论、三剪强度理论和双剪强度理论。
The strength theories of geotechnical materials can be classified as single shear strength theory, tri-shear strength theory and twin-shear strength theory.
研究表明，在岩石的强度特性方面，用双剪理论所得分析结果与实验事实较吻合。
The research work shows that in the aspect of rock strength, the analytical results agree with the experiments.
通过三砖双剪面砌体模型试验研究了动力加载条件下的砌体剪压复合受力相关性。
The results show that the stress correlation under dynamic loading is in much similar to that under static loading.
利用双剪强度理论，考虑中间主应力影响的特点，导出太沙基地基极限承载力公式。
The formula of Terzaghi ultimate bearing capacity of foundation based on Mohr-Coulomb strength theory does not take the influence of intermediate principal stress into account.
结果表明，双剪切试样受剪区域的应力状态基本为均匀分布且随蠕变时间变化很小。
The results show that there is a near uniform stress state in the shear zone.
通过试验和有限元分析研究被连接元件的相对刚度对多钉双剪连接钉载分配的影响。
In the present paper, an experimental and analytical study of effects of jointed member stiffness on the fastener load distribution is performed for double-shear, multiple-bolted joints of composite.
导出了基于双剪屈服准则的钢筋混凝土球扁壳的屈服条件，并利用此屈服条件求解出其极限荷载。
The yield conditions of axisymmetric circular plate and shallow spherical shell of reinforced concrete based on Twin shear stress yield criterion are presented in the paper.
在试验结果的基础上，通过双剪强度理论建立平面应变条件下堆石料的强度与方形三轴强度的关系式。
Based on experiment results, the relationship between strength parameters of rockfill material in plane strain state and square triaxial tests is established using the unified strength theory.
应用双剪理论对岩石在三轴压缩载荷下的强度和破坏特性进行了理论分析，并将分析结果与已有实验作了对比。
The characteristics of the rock strength and failure under triaxial compressions are theoretically analyzed in detail with the twin shear theory and the results are compared with experimental data.
现利用双剪强度理论计算火炮身管的强度，考虑了材料的拉压异性影响和轴向应力的作用，计算结果更为可信。
The twin shear strength theory to compute the strength of gun barrels is used. The effect of strength-difference and axial stress are considered. The calculating result is more convinced.
本文采用双剪统一屈服准则首次对受环形均布荷载作用下的简支圆板进行了塑性极限分析，得出了相应的统一解形式。
Then the yield conditions of the reinforced concrete plates with bilateral layout are derived employing the twin shear stress yield criterion.
但与双剪统一屈服准则不同，新屈服准则的极限线和中间主应力效应曲线是非线性的，能够描述材料的非线性屈服特性。
The loci and the effective curves of the criterion are of nonlinear types that could give a better description to the yield characteristics of materials.
然后在第三章主要基于API 579准则，以双剪屈服条件为基础，进行了油气长输腐蚀管道剩余强度分级评价技术的叙述。
Then in chapter 3, the multilevel assessment system of residual strength of corrosion pipeline is introduced on the base of API579 and double shearing yield strength principles.
运用双剪统一屈服准则，对线性荷载的两种不同分布形式作用下的固支圆板进行了弹塑性分析，分别得出了相应的统一解形式。
A unified solution of plastic limit of simply supported circular plates subjected to border uniform distributed loading is presented based on the Twin Shear unified Yield Criterion.
针对T300/KH304复合材料层合板的单排多钉双剪联接接头，考虑到孔间距离对接头强度的影响，用三维有限元模型对接头的静强度进行数值分析。
The effect of the distance between holes is taken into consideration, strength of multiple double lapped joints of T300/KH304 CFRP is analyzed by three dimensional finite element model.
一旦你找到了合适的干，用一双锐利修枝剪削减它从植物。
Once you have found a suitable stem, use a pair of sharp pruning shears to cut it from the plant.
采用有限元法，对岩体在拉剪综合作用下平行双裂纹相互影响的情况进行了计算。
The interaction between two parallel cracks in rock mass under the combined action of tension and shearing is analyzed by finite element method.
介绍一种新颖的单索与双索半剪式散料抓斗的结构和工作原理。
The construction and working principle of a newly developed single rope or double rope Semi-scissor type grab are introduced.
简要介绍了一种新式圆盘切边剪——双头回转式圆盘剪的工作原理和结构特点。
The operational principles and structural feature of double headed rotary shear have been introduced simply.
武钢初轧厂要求将其现有的1600吨双偏心浮动轴重锤平衡式钢坯剪改造为2000吨单偏心浮动轴液压平衡式。
The blooming mill shop of wuhan Iron & Steel Co. want to reform its bloom shear for the purpose of increasing the shear force from 1600 metric ton to 2000 metric ton.
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
In designing and calculating, several measures such as using the indexes of residual shear strength of sliding-belt soil and double-parameter method etc are ta.
探讨了压剪闭合共线双裂纹之间奇异应力场的相互作用。
Futhermore, the interaction of the singular stress field between, two initially closed collinear cracks is also studied by photoelasticity.
创作油画《双椅》《白墙衬托的立木四根》、《有一扇到另一房间的门》、《黑窗格剪碎白窗纸》等；
Finished oil paintings including: Double Chairs, Four Pillars Against the White Walls, A Door to Another Room, Cut the White Window Rice Paper into Pieces with Black Window Frame, etc;
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
In designing and calculating, several measures such as using the indexes of residual shear strength of sliding-belt soil and double-par...
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
In designing and calculating, several measures such as using the indexes of residual shear strength of...
为提高计算结果的可靠度，采用了滑带土的残余抗剪强度指标和双参数法等手段。
In designing and calculating, several measures such as using the indexes of residual shear strength of...
应用推荐