本文简要介绍了各种压铸铝合金的一些特点及应用情况。
This paper briefly introduces some characteristics of all kinds of die casting alumni urn alloys and their application.
支撑法兰导向元件，由抗腐蚀的高强度压铸铝合金制成，带耐磨损的滑动轴承。
Supporting flange guide elements made of corrosion-proof high-strength aluminium die-cast alloy with wear-resistant plain bearings.
通过金相组织分析以及在不同参数下以锶变质对压铸铝合金性能带来的各种影响进行了试验。
Different influence of Sr modification with different parameters by analyzing metallographic structure on properties of die casting al alloy is studied.
借助金相显微镜、扫描电镜等分析手段，对压铸铝合金清洗泵腔壁断裂失效的原因进行了分析。
Failure analysis of parietal cracking in scavenging pump made of die casting aluminium alloy was carried out by means of metallographic examination, SEM analysis and so on.
为了弥补目前压铸铝合金强韧性不足，进行了高强韧铝铜系合金的压铸及热处理的试探性研究。
In order to improve the mechanical properties of die cast aluminum alloy, trials of study on die cast and heat treatment of Al-Cu alloy which is of high strength and ductility have been carried out.
特点：该灯具灯座采用强力压铸铝合金制作，灯体采用专用合金材料，反光罩采用聚碳酸酯材料。
Charactristics: Lampholder is made from die-casting strength aluminum alloy and the body from special alloy materials and the reflector from PC.
叙述了压铸铝合金、镁合金、锌和锌铝合金的研究开发与应用状况，提出了若干压铸合金有待进一步研究开发的问题。
The research and application of various die casting alloys such as aluminum, magnesium, zinc and ZA alloys have been discussed.
对压铸铝合金进行低温时效，在最佳工艺条件下，合金的平均拉伸强度提高10 %以上，布氏硬度提高30 %以上。
Low temperature aging for die casting al alloy under appropriate technological condition can increase average strength and Brinell hardness more than 10% and 30% respectively.
叙述了合金元素和微量元素在压铸铝合金、镁合金、锌和锌铝合金中的作用及近年来取得的研究进展，分析了压铸合金有待进一步研究开发的问题。
The roles of alloying and trace elements in die-casting al, Mg, Zn and Zn-Al alloy and its research progress were surveyed. The problems in further developing die-cast alloy were analyzed.
外壳铝合金压铸成型，强度高，表面高压静电粉末喷涂，耐腐蚀。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
公司下设有模具、注塑、五金、铝合金压铸等配套厂。
Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.
利用所制备的预制块，研究了多孔铝合金的加压铸造工艺。
With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
汽车密封条、火车密封条、采暖风管、三元乙丙胶条、橡胶配件、塑料制品、铝合金压铸件等。
Automotive sealing strip, sealing strip trains, heating duct, EPDM tape, rubber accessories, plastic products, such as aluminum alloy die castings.
某厂铝合金烤盘压铸模因模面出现大面积龟裂而早期失效。
Large area crack appearing on the surface of the aluminium alloy bakeware casting dies causes its early failure.
材料：优质的铝合金压铸成型，高压铸铝灯体。纯硅胶密封圈，钢化玻璃。
Material: high quality aluminum alloy die-casting molding, high-pressure cast aluminum lamp body. Pure silicone seal, tempered glass.
用AZ91D镁铝合金压铸生产手机和笔记本电脑的结构件时，产品表面会出现爆痘、白点和黑色絮状物等缺陷。
A kind of thin wall casing made of AZ91D alloy for pocket computer and mobile phone is manufactured by die-casting.
对于铝合金压铸产品的生产商来说，积极的满足客户的需求就是企业市场营销的核心。
For the manufacturers of the aluminum die casting products, the demands of the clients' are the center of the enterprises' marketing.
本文就提高汽车齿轮箱铝合金压铸件使用寿命，进行了失效分析。
According to the enhancing service life of aluminum alloy die-casting part of the automobile gear box, carried on the failure analysis.
公司主要生产、销售铝合金压铸件。
外型设计采用铝合金压铸的传统灯具造形；美观大方、经久耐用；选用三基色节能灯泡配以透明灯罩，极具观赏价值和实用价值。
Aluminum alloy is used to cast the shell for its beauty and durableness. Tricolor energy-saving lamps and transparent lampshades are used for enjoyable appearance and good practicality.
即目前应用于工业领域的铝合金触变压铸、铝合金触变模锻和镁合金射注等工艺过程是有效的。
Presently the technologies of thixocasting, thixoforging of aluminum alloy and injection of magnesium alloy applied in industries are available.
在不同的压缩空气相对湿度下，试验测定了低压铸造过程中液态铝合金氢含量的变化。
Changes in hydrogen content in liquid aluminum were measured under different relative humidity of compressed air in low pressure die casting.
基于有限差分法，对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。
Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.
锌铝合金挤压铸造结合了挤压铸造和锌铝合金的优点，在当今对铸件质量要求越来越高的形势下，具有广阔的发展前景。
The squeezing casting of Zn-Al alloy merges the advantage of casting and forging and has the broad development under the situation of more and more high demand to casting quality.
分析了铝合金端盖压铸件结构工艺性特点，介绍了压铸模的浇注系统及模具结构设计。
The structural characteristics of aluminum alloy cover was analyzed, and the design of pouring system and die-casting die structure were introduced.
试验研究了反重力浇注条件下，铝合金消失模真空低压铸造的充型流动特性。
Mold filling characteristics of Al alloy in vacuum lost foam low pressure casting (VLFLPC) under counter gravity condition were examined.
充氧压铸已在铝合金、镁合金压铸件的生产中得到应用，如车轮、制动器缸体、液压传动阀体以及热交换器等。
Many Al or Mg alloy die castings, such as the auto wheel, the brake cylinder, the hydraulic valve, the actuator body and the heat exchanger, have been produced.
铝和铝合金。挤压铸坯。规范。
Aluminium and aluminium alloys. Extrusion ingots. Specifications.
采用CAE方法和正交分析法对铝合金支架压铸件的压铸工艺进行了优化设计。
CAE analysis and orthogonal design are applied in aluminum alloy housing die-casting process optimization design.
应用推荐