结果表明,用内压扩散复合方法实现了铜钢界面的冶金结合。
The results showed that it is feasible to obtain a metallurgical bonded interface of copper and steel by inner-pressure diffusion technique.
通过对钢-高性能混凝土组合桥塔节段进行轴压承载力试验,研究了组合桥塔的受力特性。
An axial compression test was carried out on a steel-high performance concrete composite bridge tower segment in order to study the mechanical behavior of composite bridge towers.
首次针对国产X70管线钢,应用电化学渗氢法研究了硫化氢分压对HIC性能的影响。
Electrochemical permeation hydrogen method was firstly adopted to study the influence of H2S partial pressure on HIC properties of domestic X70 pipeline steels.
对18根不同长细比和含钢率的钢管轻集料混凝土长柱进行轴压试验,研究了钢管轻集料混凝土长柱在轴心压力下的受力性能,并与钢管普通混凝土进行了对比。
Based on axial compression tests of 18 lightweight aggregate concrete-filled steel tube (LACFST) long columns, the behavior of LACFST long columns was studied and compared with that of normal CFST.
为避免钢混凝土连续组合梁发生局部失稳,对负弯区钢梁腹板在弯曲应力、轴向压应力和剪应力联合作用下的力学性能进行了研究。
The mechanical behavior of steel webs with negative bending was studied with combined stress loads of flexure, axial pressure and shear to prevent local buckling in continuous composite beams.
钢衬塑运输槽罐的钢体部分的制作,按照JB/T4735-1997《钢制焊接常压容器》标准。
Transport steel tanks lined with plastic body parts of the steel production, in accordance with the JB/T4735-1997 "welded steel pressure vessel" standard.
采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面,成功获得覆层材料。
Steel-bonded cemented carbide powder processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
铸造的扩压器并镶有不锈钢叶片。
螺栓荷载是用死荷重来模拟的,以钢球和压钮作为代用件,通过它们将此荷载施加于螺栓孔。
Dead weight loading simulating that of the bolts was applied at the bolt holes through the agency of steel balls and buttons.
本文给出了计算钢压杆弹塑性稳定极限承载力的有限条塑性系数增量初应力法。
The paper presents a numerical method, named the Finite Strip Plasticity Coefficient Increment Initial Stress Method, to solve the elastoplastic stability ultimate loads of steel columns.
概述了目前高氮钢的主要制备方法,重点讨论了常压和高压电渣重熔高氮钢的特点和存在的问题;
The features and problems of manufacturing high nitrogen steels by the electroslag remelting method at normal atmospheric pressure and high pressure have been discussed in detail.
真空辅助压浆工艺是目前世界上流行的预应力钢束压浆工艺。
With many advantages, the vacuum aided grouting process is a popular grouting process for prestressed stay cables in the present world.
介绍了SIMOVE RT MV中压变频器在莱钢干熄焦循环风机中的应用情况。
This paper presents the application of SIMOVERT MV medium voltage frequency transformer in the circulating fan for CDQ in Laigang.
用弹性理论分析方法,得到了环向纤维增强钢压力容器(压缩天然气气瓶)在内压作用下的应力。
Based on the elastic stress analysis, the stresses of the hoop fiber reinforced steel pressure vessels (compressed natural gas bottle) under internal pressure are obtained.
采用液相烧结法将爆炸压实后的WC钢结硬质合金粉末复合在碳钢表面,对不同烧结温度下的界面组织和抗剪强度进行了研究。
WC steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
介绍了南钢石灰粉料压球生产线的工艺流程、主要设备和操作要点。
The key points of the process flow, main equipment and operation for fine lime briquetting production line of Nanjing Iron and Steel Integrated Corporation are described.
试验结果表明:温压工艺能够较大幅度地提高316L不锈钢粉末的生坯密度和生坯强度,也能提高其烧结后的密度和抗拉强度。
Results show that warm compaction can improve the green density and strength of 316L powder greatly and improve its sintered density and tensile strength as well.
本文作者通过一工程实例,介绍了蒸压加气砼小型砌块、彩钢夹心板在直接加层工程中的应用及采取的施工技术措施。
This article describes the use and construction technology for small block of steam pressed aerated concrete and sandwich panel used in direct storey increasing project.
试验中考虑了砂土的初始相对密度、钢球的运动速率、液化后砂土的超孔压比等因素的影响。
The initial relative density of the deposited sand, the velocity of the sphere and excess pore pressure ratio are the main factors in the tests.
防屈曲支撑是通过在支撑钢芯外围附设防止其整体失稳的约束单元,在限制支撑发生屈曲的同时能够使其在较大拉压荷载作用下都表现出全截面屈服。
Buckling-Restrained Brace (BRB) offer lateral restriction to the steel core to avoid it to buckle, when being suffered big press or pull, and the steel core always can yield.
压水反应堆堆内温度测量装置是监测反应堆热功率输出及堆内功率分布情况、保证反应堆安全运行的手段之一。该装置以热电偶作为测量元件,用不锈钢作保护外套。
The PWR in-core temperature detection device, which is one of measures to ensure reactor safety operation, is to monitor and diagnose reactor thermal power output and in-core power distribution.
电站锅炉承压部件与非承压部件异种钢焊接选材存在问题,没有足够的试验数据作为参照。
There is a problem in selecting consumables as welding T91 steel tubes and non-load-bearing stainless steel plates, that is, there is not experimental data enough to support that.
随着汽车轻量化的要求,热轧高强钢不断地被应用到轮辋上,辊压工艺成为钢制轮辋的主要成形方法。
With the demand of car lightweight, more and more high strength steel is being used in wheel rim, and rolling has been the main processing method of steel wheel rim.
《钢结构设计规范》(GB50017—2003)提出对单轴对称截面钢压杆的弯扭屈曲需做单独验算。
Struts of singly symmetric section need to be checked on flexural torsional buckling, according to the current code for steel structure (GB50017—2003).
管线钢在轧制变形过程中,如果边角部金属延伸不均会产生折叠,压入钢板表面后形成“细线”缺陷。
The slimline defect was formed by the folds forced in the surface which was generated by the inhomogeneity of edge and corner elongation in rolling process.
本发明公开了一种可通过焊接形成石墨钢堆焊金属的焊条。它由低碳钢、镍或镍基合金制成的焊芯和压涂在焊芯外表面的焊条药皮构成;
The welding rod capable of forming pile-up welded graphite-steel metal consists of welding rod core of low-carbon steel and nickel or nickel-base alloy and coating outside the welding rod core.
测试分析了钢球作为固体颗粒传压介质的压力分布及压头锥角对压力分布的影响规律。
The pressure distribution curve and the influence of the angle of head are tested and analyzed using steel ball qua solid granules pressure-carrying medium through experiments.
综述了添加元素对奥氏体不锈钢粉末压坯液相烧结行为及材料性能的影响。
The paper summarizes the effect of additives on the liquid phase sintering behaviour of the compact of austenitic stainless steel powder and the properties of resultant material.
最后对不同加载方式下FRP-混凝土-钢混合双管柱的轴压性能进行了理论分析。
Finally, the mechanical analysis for FRP-concrete-steel double-skin tubular columns under different loading methods is presented.
最后对不同加载方式下FRP-混凝土-钢混合双管柱的轴压性能进行了理论分析。
Finally, the mechanical analysis for FRP-concrete-steel double-skin tubular columns under different loading methods is presented.
应用推荐