文中介绍了采用单相半桥电路实现可逆整流的方法。
A method is introduced that reversible rectification can be realized with single-phase half-bridge circuit in this paper.
一种新颖的具有故障隔离特性的半桥电路结构六相永磁容错电机控制系统。
The invention relates to a novel six-phase permanent magnet fault-tolerant motor control system in a half-bridge circuit structure, which has the characteristic of failure isolation.
在设计中，以TL 494作为PWM产生电路输出控制信号，控制开关管的导通状况，在半桥反激式输出的基础上实现了电源的多路输出。
In the design, to produce circuit TL494 as a PWM output control signals, control of the on-switch situation, the half-bridge flyback output on the basis of the power of multi-output.
在设计方案中，采用第四代IPM作半桥主电路，以性能好、功能强的数字信号处理器TMS320 LF 240 X DSP为控制器。
In the plan of design, the fourth generation of IPM is used as the main half-bridge circuit and TMS320LF240X DSP with good performance and strong function is used as a controller.
现代高功率因数电子镇流器结构中普遍采用功率因数校正（PFC）和半桥逆变谐振电路拓扑。
The power factor correction (PFC) and half-bridge inverter circuit topology are commonly used in modern high power factor electronic ballasts.
以隔离型对称半桥双向变换器为对象，建立了以原边为参考的4种模式下的简化电路，提出了结合开关函数的状态空间平均模型的建立方法。
For isolated-type symmetry half-bridge bidirectional converter with phase-shifted control, a simplified circuit under 4 modes using the primary windings of transformer as reference object is built.
IR2167是集功率因数校正器（PFC）、镇流器和半桥驱动器为一体的新型电子镇流器驱动电路。
The IR2166/IR2167 are such IC that PFC, ballast control and half-bridge driver are made in one IC.
该电路拓扑族包括单四象限功率开关式、推挽式、半桥式、全桥式等四种电路。
The circuit topologies family include single four-quadrant power switch mode, push-pull mode, half-bridge mode, and full-bridge mode circuits.
研究了微机中具有代表性的半桥脉宽式开关电源的电路原理和特点，提出了简捷、合理的检修方法和步骤，以及关键测试点的经验数据和波形图。
The circuit principle and features of the typical half - bridge switching power source, the reasonable overhauling methods and steps and the key test data waveshapes in computer are discussed.
本电源采用零电流半桥软开关电路，使电源具有效率高，响应速度快的特点，很容易配合各种厂家的激光管。
The power supply adopts zero-current half-bridge soft switching circuit, featuring high efficiency, fast response and easy matching for laser tubes produced by various manufacturers.
利用MOS管、半桥驱动芯片LM27222、栅极驱动变压器等器件，设计了变极性矩形波发生电路。
A rectangular wave generating circuit has been designed with MOSFETs, half bridge driver chip LM27222 and gate drive transformer.
对开关电源电路的常见故障进行了分析，介绍了一种半桥驱动型开关电源电路的故障检修思路和开关电源电路静态检修法。
The paper analyses the common faults of switching supply circuit and introduces a method for fault overhaul of half-bridge switching supply circuit.
介绍了以半桥串联逆变谐振电路P。
On the basis of halt-bridge, series, converting-resonant circuit P.
基于充电机安全性能，功率等级以及应用场合的考虑，主电路拓扑选用的是带隔离的半桥逆变电路。
In consideration of safety performance, power rating and applications of the recharger, the isolated half-bridge converter circuit is adopted in the main circuit topology.
介绍了一种半桥逆变式电子束焊机高压电源的工作原理和控制电路。
This paper introduces the working principle of high voltage source with half-bridge inverter for electronic beam welder.
依据一个半桥逆变电路的实例详细介绍了高频变压器设计的一般方法和步骤，并讨论变压器损耗和温升问题。
The method of design high frequency transformer in half bridge inverter circuit is introduced exampled in detail, besides temperature rise and power loss are discussed.
由于设计采用了不对称半桥结构，提高了系统主功率电路的容错性。
The system adopts asymmetry half bridge structure, which makes the main power converter fault tolerant.
该电路拓扑族包括单四象限功率开关式、推挽式、半桥式、全桥式等四种电路。
The circuit topologic family includes circuits of single four-quadrant power switch mode, push-pull mode, half-bridge mode. and full-bridge mode.
该电源采用了IGBT模块构成的半桥逆变电路，它具有IGBT驱动、过压、过流、过热保护及故障锁定功能。
The power supply has the functions of IGBT driver, over-voltage protection, over-current protection, over-heat protection and fault locking.
对于桥路的选择作了分析，认为半桥连接比全桥连接的干扰电平低，建议在应变测试中采用半桥连接电路；
The author believes that the interference level cau- sed by a semi-bridge connection is lower than that by a fully-bridged connection, and a semi-bridge wiring plan is better suited for strain tests.
本文在分析X射线管外特性的基础上，设计制作了开关电源功率主电路，分析了有源功率因数校正器原理、LCC半桥谐振变换器原理及倍压整流电路原理。
This paper based on analyzing the X-Ray tube designs the switching power supply circuit, analyzes the principle of APFC, LCC half bridge resonance convertor and dual rectifier circuit.
为改善印刷电路板线路的电磁干扰性能，提出了一种半桥准谐振变换器印刷电路板寄生参数的提取及优化的方法；
The paper presents a method to obtain and optimize the parasite parameters of the PCB in HB QRC converter for better EMC performance.
通过控制逆变器输入平均电流调节负载功率，简化了电路设计；通过单片机发出高频加低频调制的半桥驱动信号，消除调光过程中的电弧不稳定现象。
A easier and low-cost power control method is proposed in this paper, based on the regulation of the average input current of the inverter.
通过控制逆变器输入平均电流调节负载功率，简化了电路设计；通过单片机发出高频加低频调制的半桥驱动信号，消除调光过程中的电弧不稳定现象。
A easier and low-cost power control method is proposed in this paper, based on the regulation of the average input current of the inverter.
应用推荐