改装内容包括双十字轴和加长前传动轴。
Double joint added to the front drive shaft and the shaft made longer.
其主要部件包括十字轴、万向节叉以及滚针轴承等。
The main components of a spider cardan joint include the spider, yokes and quill bearings, etc.
本文分析了普通十字轴万向节内二次力矩产生的原因。
In this paper, why the second couple in the ring-fork U-joint occurs is analyzed.
十字轴最大应力发生在圆弧过渡处，因此，应提高该处的表面加工质量。
The maximal stress in cross universal coupling happens at the circular transition where measures should be taken to enhance the surface machining quality.
结果表明，十字轴断裂是由过载造成的，并针对断裂原因提出解决方案。
The result shows that the main reason for the fracture of the cross head is"overload". The way to solve the problem have been proposed.
万向节十字轴的四个轴颈叫做万向节十字头，分别装在两个万向节叉顶端的轴承中。
The four arms of the spider, known AS trunnions, are ASsembled into bearings in the ends of the two shaft yokes.
在普通十字轴万向节二次力矩的基础上，推导出环叉式万向节二次力短的瞬时表达式。
On the base of the second couple of the common cross U-jioint. a transient value of the second couple in the ring-fork U-joint is obtained.
探讨了复杂类大型十字轴锻件的锻造成形工艺，该工艺对同类型锻件的成形也有借鉴价值。
Forging technology of complicated large crossing shaft has been probed into, which can be used for reference to forming of similar type of forgings.
文内见解对延长十字轴万向联轴器的使用寿命和结构的改进具有一定指导意义和参考价值。
This paper will have certain direct significance and referential value for prolonging the usage life and improving the structure of the cardan joint.
在分析运动规律和损坏状况的基础上，提出把十字轴轴颈加工成锥度的办法减轻轴颈损坏。
On the bases of analysis for motion regularity and damage condition, a method for taper machining of cross shaft journal is proposed to reduce journal damage.
u形件称为万向节叉，连接万向节叉的十字叉叫作十字轴，从十字轴延伸出的臂叫作耳轴。
The U-shaped pieces are called yokes. The cross that connects them is called a spider. The arms that extend from the spider are called trunnions.
传动时转速、转矩衡定，在同回转直径下比“十字轴式联轴器”提高传动转矩50%左右。
The rotating speed and torque are constant during rotation, as compared with cross-shaft coupler under the same radius of gyration, it raises the driving torque about 50%.
本文介绍了60D低淬透性钢万向节十字轴和循环球转向螺杆的各项性能及装车使用试验情况。
This paper presents the properties of the U-joint spiders and the worms of recirculating ball steering gear which made from a low quenchability steel 60D, as well as their testing results on the road.
最后将该方法用于RCCC空间机构以及进一步用于十字轴方向联轴器中，并取得了较为满意的结果。
At the end of this chapter this method is used in analysing RCCC space mechanism and further more in a cardon joint and the results are satisfactory.
一种新型的十字轴式万向联轴器，其特征在于十字轴头是由十字轴环(2)与四个轴伸(3)所组成。
The utility model relates to a cross axle universal coupling, which is characterized in that a cross axle head is composed of a cross axle ring (2) and four axle extensions (3).
研究并基本解决了轴线相交且做允许的任意空间运动时等速万向节和十字轴式不等速万向节的运动传递特性的分析问题。
Presented is an analysis of the motion transmitting characteristics of constant velocity joint (CVJ) and Cardan joint when the axes of the joints move arbitrarily in the constraint permitted space.
通过刚柔耦合仿真和刚体模型仿真的比较，得出柔性体对摇摆台性能的影响因素，同时为十字轴的动力学分析和优化提供必要的动态载荷。
Based on this simulation, it conclude the difference between rigid body and flexible body, and also supplied necessary dynamic load for spider's dynamic analysis and optimization.
建筑被设计成十字形，由中轴、纵轴和垂直轴三轴确定。
The building, designed in a cruciform plan, is defined by three axes: central, longitudinal and vertical.
该装置由离轴抛物面反射镜、十字靶标、背景光源、图像采集装置及其它附件组成。
The system is composed of off-axle paraboloid reflector, cross line target, background light, imaging collecting system and other devices.
本文通过对十字型滑块式万向接轴工作原理及其特性的分析，论证了什么样的布置是正确的。
A proper arrangement of the forked ends is given through analysing the working principle and characteristic of the slipper type universal coupling.
分形单元具有三个对称轴，比以前文献中提到的十字交叉形单元具有更好的圆极化特性。
Y-fractal element has three symmetrical axils, so this kind of element has better circularly polarized character than cross dipole element that has two symmetrical axils.
汽车十字万向节，三叉万向节联轴器，差速器，传动轴。
Coupling Series, U-joint Series, C. V. Joint, Construction Machinery Transmission Shaft Series.
为了补偿轴向位移，经常在双十字万向联轴器的中间轴上采用轴向滑动装置。
In order to compensate axial displacement, an axial sliding mechanism is often used in the intermediate shaft of a double universal joint.
十字隆凸通常位于上、后半规管壶腹嵴的中部，与壶腹嵴的长轴垂直。
Usually being located at the middle of the cristae of vertical semicircular canals, the eminentia cruciata protrudes perpendicularly to the long axis of the crista.
需采用十字滑快式联轴器与用户轴连接。
Connected with service shaft by cross sliding block coupling.
目前对于十字头万向接轴整体式轴承座键槽的受力计算尚无简便确切的方法。
So far there has been no simple and correct calculation approach available for computing the stress distribution in the key slot on the integral cross pin type journal bearing rest.
再根据异形柱框架结构受地震作用时应具有的柱截面曲率延性水准确定不等肢T形、L形、十字形柱轴压比限值，为不等肢异形柱设计提供了必须的依据。
On the basis of the calculation results, the ultimute axial compression ratio for the inequal-leg T-shaped, L-shaped and cross-shaped columns is presented.
再根据异形柱框架结构受地震作用时应具有的柱截面曲率延性水准确定不等肢T形、L形、十字形柱轴压比限值，为不等肢异形柱设计提供了必须的依据。
On the basis of the calculation results, the ultimute axial compression ratio for the inequal-leg T-shaped, L-shaped and cross-shaped columns is presented.
应用推荐