他相信，制造SQUID时，这项技术的应用比现代的印刷集成电路技术要容易，因为它不需要有光敏涂层，也不再需要化学物质洗去涂层。
He believes this would be easier to carry out than the lithography currently used to manufacture SQUIDs because it would require no photosensitive mask and no chemicals to wash away that mask.
他想使用比家庭清洁剂危险还小的化学制剂给食品容器做安全的表面涂层。
He was trying to make safe surface coatings for food containers using chemicals less hazardous than those found in household cleaners.
涂层是用来涂在物体外部保护物体的化学物质。
Coating refers to a chemical that is applied to the outside of something to protect it.
从基材上化学的或机械的方法移除涂层。
Chemical or mechanical method of removing the coating from the substrate.
涂层的化学气相沉积(CVD)和表面层改性的物理气相沉积(PVD)涂层的离子注入，所有三个正在受到考验，并部分使用。
Coating by physical vapour deposition (PVD), coating by chemical vapour deposition (CVD) and surface layer modification by ion implantation, all three are being tested and are partly in use.
热化学反应法制备金属基陶瓷涂层具有工艺简单、成本低廉、涂层与金属表面结合力特强等优点。
Preparation of metallic ceramic coatings by thermochemical reaction method has the advantages of simple process, low cost, very strong adhesion of coatings to metal surface.
铝及铝合金化学氧化后涂漆，可大大提高基体与涂层的结合力，并增强铝材的抗蚀能力。
With chemical oxidizing and subsequently paint ing of aluminum and its alloy, adhesion of aluminum substrate with coatings coul d be greatly improved, as well as corrosion resistance.
这些化学制剂主要用于溶解剂、乳化剂和涂层作用剂的表面活性剂。
These chemicals are mainly surfactants used as solubilizers, emulsifiers or coating agents.
树脂和固化剂通过化学反应而达到最终的涂层性能。
The reaction between resin and hardener to form the final film properties.
常规的化学蒸发沉淀涂层工艺需要一种容易在相当低温度下挥发并且在较高温度下与基体接触时能分解成纯金属的金属化合物。
Conventional CVD coating process requires a metal compound that will volatilize at a fairly low temperature and decompose to a metal when it contacts with the substrate at higher temperature.
为增加切削刀具表面硬度引入了钻石化学蒸发沉淀涂层工艺。
Diamond CVD coating process is introduced to increase the surface hardness of cutting tools.
凯史先生：我们观察过纳米涂层盒子，但是我们不明白生命循环，所以我们决定不涂层它，它具有所有的化学物质，碱怎样去影响它？
We looked at nano-coating the boxes but we do not understand the cycle of life so we decided not to. These are all chemical products and would the caustic affect it?
磺酸基官能团可以改善碳纳米管的化学性质，促进其在复合材料以及涂层中的应用。
Functionalized carbon nanotubes containing sulfonic groups can improve the chemical property of nanotube, and may promote their many potential applications such as in composites and coatings.
最后，利用电化学方法研究了在不同腐蚀环境下混凝土保护涂层对钢筋锈蚀行为的影响。
Lastly, the influence induced by concrete protective coating on reinforcement corrosion is discussed using electrochemical method.
用电化学阻抗谱研究了丙烯酸系乳胶作为混凝土添加剂或钢筋表面涂层时对钢筋腐蚀行为的影响。
Acrylic emulsion was introduced into steel reinforcing concrete as concrete admixtures or rebar coatings in order to prevent steel reinforcements from corrosion.
总而言之，本文从热力学、扩散、氧化动力学和力学化学活度四个方面对热障涂层的高温氧化机理作了一个较为详细的论述。
In a word, the thesis gives a detailed study of high temperature oxidation of thermal barrier coatings from thermodynamics, diffusion, oxidation kinetics and mechanochemistry activity.
肯德基门粉状涂层经过高温烘烤，变成效果各异、美观耐用、防化学侵蚀及紫外线的最终涂层。
KFC door after high temperature baking powder coatings into different effects, beautiful and durable, anti-chemical corrosion and UV-final coating.
介绍了纳米复合搪瓷涂层的化学成份，涂层粉末粒度的比例、浆料的制备工艺及保存方法。
The article introduces the chemical composition of nano-composite enamel coating, proportion of coating powder size, preparation and preservation of the slurry.
采用化学反应法，在普通碳素钢上涂覆一层均匀致密的陶瓷涂层。
The carbon steel sample is coated with a uniform dense ceramic layer by chemical reaction method.
研究人员已经尝试几种类型的电化学涂料，观察他们是否能提高导电性，但涂层往往打破迅速或不留贴上电极。
Researchers have tried several types of electrochemical coatings to see if they could improve conductivity, but the coatings often break down quickly or fail to stay affixed to the electrodes.
叙述了涂层金属耐腐蚀性的几种电化学测定方法，例如直流电阻法、交流阻抗法、电位时间法、充电曲线法。
Several electrochemical determination methods to test the corrosion resistance of coated metals were described, such as DC resistor, AC resistor, potential time and charging curve.
研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。
The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.
采用电化学方法研究了两种常用涂层—环氧沥青涂层和环氧铝粉涂层在3。
Corrosion behaviors of two kinds of common used coatings–bituminous epoxy coating and epoxy aluminum coating immersed in 3.
应用电化学方法研究了磷酸锌在水溶液和醇酸涂层中的缓蚀性能和缓蚀作用机理。
The difference of inhibition mechanism of zinc phosphate in aqueous solution and in alkyd coating has been studied by using electrochemical techniques.
研究了埋地管道体系的等效电路模型，为将电化学理论应用于管道涂层缺陷检测打下了坚实基础。
Equivalent circuit model corresponding to buried pipeline system is analyzed, which laid firm foundations of electrochemistry theory application to the detection of pipeline coating faults.
利用电化学阻抗谱（EIS）技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。
The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS).
利用电化学阻抗谱（EIS）技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。
The resistance to corrosion of an epoxy coating containing the pigment of zinc chrome yellow was studied using electrochemical impedance spectroscopy (EIS).
应用推荐