针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Considering characteristics of grotto relics the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
针对石窟文物的特点，阐述了影响石窟围岩变形稳定性的主要因素和动力有限元分析方法。
Considering characteristics of grotto Relics, the influence factors and dynamic finite element analysis methods on deformation stability grotto country rock are discussed.
采用三维非线性动力有限元分析方法，建立了坝体的地震反应和地震永久变形的分析模型。
The analysis model of seismic response and earthquake induced permanent deformation of dam is established with the 3-d nonlinear FEM.
本文从土与结构动力相互作用的观点出发，提出了用动力有限元分析计算地下结构上地震动土压力的方法。
Based upon the point of view of soil-structure interaction, this paper presents a procedure for evaluating the dynamic earth pressure on underground structures under earthquake motion by FEM.
ANSYS软件是一种大型通用的有限元分析软件，可以准确的进行机床的静力、模态、谐响应以及瞬态动力学的有限元分析。
Besides, ANSYS is a large general-purpose software, which can be used to analyze static, dynamic, harmonic response and transient dynamic analysis of the machine tool.
同时，应用结构有限元分析程序对模型及原型结构进行动力计算，并将两种结果进行比较分析。
The dynamic calculations of the model and prototype structures are also made using structural finite element analyses programs and the results are compared and analyzed with the test.
将拉延筋模型引入到板料成形动力显式有限元分析中，并以汽车前照灯矩形反光镜为应用实例，对其拉延成形过程进行了模拟。
Drawbead model has been applied to the dynamic explicit FEM analysis of sheet metal forming process and the simulation of deep drawing of rectangular viewfinder of automobile headlight been realized.
将冲击动力学的基本方程和有限元分析相结合，建立了复杂结构在冲击载荷作用下的分析方法。
Then the author combines the basic equation of impact dynamics with finite element method and establishes the analysis method of complex structures under impact load.
针对风力机叶片结构的运行工况，应用有限元分析方法，对叶片进行动力学建模、动力学特性及应变响应的分形特征研究。
In this paper, we studied its dynamics model, the dynamic characteristic and fractal characteristic of the strain response of the blade with FEM.
本文基于有限元分析软件ANSYS研究冲击载荷下石油测试管柱减振系统的动力学性质。
Dynamic character of oil testing pipe shock absorber system under impact load were searched which were based on finite element analysis software ANSYS in this paper.
对官地混凝土重力坝进行了三维静动力线弹性和非线性有限元分析。
A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.
首先对弹性五杆机构进行有限元分析，通过机构梁单元节点位移间的关系，建立起弹性五杆机构单元质量矩阵与刚度矩阵以及弹性动力学模型。
Firstly, the links of the plane five-bar linkage mechanism is simulated by beam element, the mass matrix, stiffness matrix of linkage mechanism and elastic dynamic model of system are established.
针对竖向传播的SV波作用下刚性桩复合地基的动力反应，在振型分解反应谱法的理论基础上，提出一种基于有限元分析的拟静力方法。
Based on the finite element method and the theory of mode superposition, a quasi-static calculation method for the seismic response of rigid pile composite foundation under SV wave is presented.
利用显示动力学有限元分析方法，模拟了波纹轨腰钢轨的轧制过程。
The rolling process of corrugated waist rail is simulated by explicit dynamic FEM.
利用大型通用有限元分析软件ANSYS简单模拟辽西地区中生代末期岩石圈动力学演化过程。
Using general finite element program ANSYS, we simulate a dynamical evolution process of the lithosphere of west Liaoning, northeast China in the late Mesozoic.
在计算过程中，分别采用流体分析软件FLUENT分析流场和有限元分析软件ANSYS计算立管的动力响应。
CFD software FLUENT is used to analyze the fluid field and FE software ANSYS to analyze the riser dynamic response.
本文以实际工程项目为背景，利用大型有限元分析软件ANSYS，研究动力基础与地基协同工作的动力特性。
Based on a practical project, this article studied the dynamic characteristics of the cooperation, using finite element analysis software ANSYS.
这个方法也可用于估计有限元分析和汽车结构动力学设计的可靠性。
This method can also be used to estimate the reliability of finite element analysis and dynamic design of automotive structures.
本文对新鲜人颅骨结构的静力和动力特性分别进行了有限元分析和测试。
The static and dynamic character for fresh human skull structure is made by the finite element method and experimentation.
将机械动力学与有限元分析方法相结合，建立了机构动平衡实验台振动测量的仿真方法。
Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing test-bed of mechanism.
根据瞬态动力响应特性的有限元分析结果，对导苗管的结构设计提出了改进意见。
Instantaneous dynamic response characteristics of the seedling guide tube are gained, and these characteristics are theoretic bases of the...
总之，文章比较系统的阐述了基于多体动力学和有限元分析研究客车车身骨架结构疲劳特性的基本思路。
In short the article gives a systemic basic researching idea of fatigue characteristics of the bus body structure based on multi-body dynamics and finite element.
本文采用大型有限元软件ANSYS，对巨型框架结构进行有限元分析，得到结构体系的动力特性和地震响应。
This paper uses large-scale finite element software ANSYS to make finite element analysis, receives dynamic characteristics and seismic response of the Mega-frame structure.
本文建立了基于ANSYS有限元分析软件的光学振动失调物理模型，通过瞬态动力学分析得到了反射镜在振动激励下的位移响应。
Physical model of misaligned optical system under interference vibration was developed based on ANSYS and the dynamic response of the reflector was obtained by transient dynamic analysis.
泵的三维模型不但可以用于零件装配、干涉检查、加工模拟，而且可以为有限元分析(FEA)和计算流体动力学(CFD)分析提供计算模型。
The 3-d pump model cannot only be used in assembly, intervene inspection and process simulation, but also provide computational model for FEA and CFD.
利用有限元分析方法，对冠状动脉搭桥术中单路移植管和对称双路移植管内的生理流动进行了数值模拟，并对两种情况下的血流动力学计算结果进行了比较。
The physiological blood flow in 1-way and 2-way bypass graft of coronary is simulated with finite element method, and the data on computational hemodynamics of these two cases were compared.
利用有限元分析方法，对冠状动脉搭桥术中单路移植管和对称双路移植管内的生理流动进行了数值模拟，并对两种情况下的血流动力学计算结果进行了比较。
The physiological blood flow in 1-way and 2-way bypass graft of coronary is simulated with finite element method, and the data on computational hemodynamics of these two cases were compared.
应用推荐