电路部分使用了这种方法最初用于在加速度计,它部署在车辆的安全气囊在撞车时。
Circuitry parts made using this method were initially used in accelerometers, which deployed airbags in vehicles at the time of a crash.
提出了基于周期单元的加速高速电路电容参数提取的积分方程法。
An integral equation method based on periodic cell to accelerate capacitance extraction of high speed circuits was proposed.
提供电路以加速控制信号的响应时间。
Circuitry is provided to speed up the response time of a control signal.
磁场加速法是一种新型、高性能的感应电动机控制方法,其电磁过程可用暂态等值电路进行分析。
Field acceleration method is a new control method for induction motor. Its electro-magnetic process can be analysed with the transient equivalent circuit.
为了优化此类工作,电路需安装更昂贵的加速图形卡。
More expensive "accelerated" graphics CARDS are equipped with circuitry that optimizes such tasks.
其中,检测电路的性能对加速度计整体性能起着日益重要的决定作用。
The performance of detecting circuits is becoming more and more important in determining the performance of accelerometers .
为提高灵敏度和线性,该加速度计采用静电力反馈闭环控制方式,检测与处理电路采用高精度双极线性电路工艺进行了工艺流片。
To improve sensitivity and linearity, feedback loop was adopted with electrostatic in detection and managing circuit, which is fabricated with high precision bipolar linear circuit technology.
推导了这种加速度计的敏感元件和位移检测电路的灵敏度公式。
The sensibility formulations of the sensitive element and displacement detection circuits of the accelerometer are derived respectively.
本文叙述圆片式和双晶片式压电线性数字加速度表的原理、结构、电路和性能。
This paper describes principles, configurations, circuitry and properties of disk and bimorph piezoelectric linear data accelerometers.
信号处理电路是干涉型光纤加速度计系统中的重要部分。
The signal processing system is the key component for the fiber optic accelerometer system.
系统为加速器调整电路提供一个正比于输入电压的电流。
The system supplies analog current to the accelerator's tuning circuit, which is proportional to the input voltage.
本文主要论述集成电路加速寿命测试理论方法和IC常见失效模式。
The paper mainly dwells on the common failure modes and the IC accelerating life span test theory and technology.
应用单片机组成电路测试电除尘器集尘极和电晕极的振打加速度,精度高、速度快,能自动显示打印结果。
Using monolithic computer to measure the rapping acceleration of collecting electrode and corona electrode has the feature of high accuracy, high speed, automatic display and printout of results.
此发明特别适合于对结构进行加速处理,这些结构存在于比如印制电路技术中。
It is suitable, in particular, for the accelerated treatment of structures as are found, for example, in printed-circuit-board technology.
本文研究设计了适于MEMS电容加速度传感器读出电路的低通滤波器。
This paper is to research and design the low-pass filter of the MEMS capacitive accelerometer sensor readout circuit.
对于悬架系统的检测单元,设计了空气悬架加速度传感器驱动电路。
Drive circuit used for acceleration transducer has been designed for testing unit of suspension system.
为了实现高性能闭环微加速度计检测系统,本文对全差分检测电路进行了研究。
In order to realize a high performance closed-loop micro-accelerometer system, the study on full-differential interface circuit was taken in this paper.
对重力卫星微加速度计位移检测电路的输入输出关系进行了详尽的推导,对各种噪声进行了分析,并选取一组典型参数计算了具体数值。
Various type of noises of displacement detecting circuit of accelerometer for gravity satellite are analyzed and computed through deriving the relationship between input and output.
超大规模集成电路的飞速发展,使人们越来越多的考虑利用已设计好的电路模块来加速系统设计,即设计重用问题。
With the development of VLSI, many people consider of using the existing circuits to accelerate the design speed of the system, which is called design reuse.
本文介绍了一种扭摆式微硅型加速度计的工作原理,制作方法和测试电路。
In this paper, the operating principle of a planar vibrator micromechanical silicon accelerometer, the way of preparation and the designing of the detecting circuit are introduced.
文章提出了一种采用电路化简加速功耗估计的方法。
In the paper authors present a new approach of speeding up power estimation of CMOS sequential circuits by circuit simplication.
作为全差分微加速度计检测电路的电荷放大器,必须进行低噪声设计。
The charge amplifier for the interface circuit of full different accelerometer needs lower noise design.
本文首先分析了电容式闭环加速度计检测电路的原理,给出了低功耗的检测电路架构。
Firstly, a low power sensing circuit system is proposed by analysing closed-loop accelerometer sensing principle.
介绍了研究集成电路互连线电迁移的两种方法:加速寿命试验和移动速度试验。
Two main methods, accelerated lifetime test and drift velocity test, to study electromigration are described.
该方法通过使用分层位操作电路取代分层MUX选择电路实现位操作加速来减少电路时延,使得位操作加速器的时间复杂度从o (N)降到了O 。
The accelerator is implemented with multiple levels of bit manipulator instead of MUX, it reduces the time complexity of the accelerator from o (n) to o .
本文介绍了一种电容式微机械加速度计的数字化处理电路,并重点介绍了数模转换器和模数转换器的温度特性。
A digital processing system based on a capacitive MEMS accelerometer is introduced, the analysis is concentrated on the temperature characteristic of DA and AD.
本论文针对MEMS电容式加速度传感器的单片集成接口电路进行了深入的研究。
The integrated MEMS capacitive accelerometer interface circuit will be studied here in this dissertation.
本论文针对MEMS电容式加速度传感器的单片集成接口电路进行了深入的研究。
The integrated MEMS capacitive accelerometer interface circuit will be studied here in this dissertation.
应用推荐