在现场实践中,此方法对利用定量化指标评估水力割缝效果具有十分重要的指导意义。
In practice, the method is very useful to evaluate the results of hydraulic cutting with quantitative indexes.
有2项新型完井工艺,即水力喷砂射孔和水力割缝。
There are 2 new well completions, that are hydraulic sand jet perforation and hydraulic slotted liner technique.
最后提出了管材激光割缝时槽宽尺寸精度控制的补偿原则。
At last, the authors give a compensation principle for dimensional accuracy control of grooving kerf width with laser beam for seamless pipe.
介绍了特大煤样采用水力割缝提高瓦斯渗透率的实验研究。
The testing research about enhancing permeability rate by hydraulic cutting seam on outsize coal sample is introduced.
针对石油割缝筛管的现状,开发出了一种新型复合缝腔割缝筛管。
Aimed at the current status of petroleum slotted sieve tube, a kind of new typed slotted sieve tube with compound slot was developed.
最后对割缝增产的机理及磨料射流割缝工艺参数的选择进行了分析。
Finally, mechanism of slotting simulation and selection of technical parameters for abrasive jet slotting are analyzed.
利用所研制的水平井软件HWCS对割缝衬管完井的产能进行了预测。
The software of HWCS developed by ourselves, has been used to predict the productivity of slotted liner well completion.
数值模拟结果表明,水力割缝技术可达到使近井地带充分卸压的目的。
The results of numeral simulation show the hydraulic cutting techniques can reach the purpose to unload the zones near the well bore sufficiently.
介绍了适用于不同渗流能力的地层的割缝筛管防砂工艺及现场应用情况。
The technology of slotted screen liner sand control used in percolation ability formation and its field test was introduced.
膨胀式防砂筛管由膨胀式割缝基管、相互重叠的金属滤网和膨胀式割缝保护套构成。
ESS consists of expandable slotted steel tube, overlapped metal screen and expandable slotted shroud.
针对割缝衬管完井方法,进行了完井参数、单根割缝衬管长度、完井管柱结构的优化设计。
For the well completion method by slotted liner, well completion parameters, single slotted liner length and pipe string structure in well completion are optimized.
采用开环系统和手动、自动模式切换装置,可以经济、有效、大量地加工带有窄缝的割缝筛管。
The slotted pipe with narrow slots can be mass worked economically and efficiently by means of open loop system and hand automatic model shifter.
在裸眼完井产能评价模型的基础上进一步推导出火山岩气藏射孔完井和割缝衬管完井产能评价模型。
Through the open hole completion productivity evaluation model, respectively derive perforated completion and slotted completion productivity evaluation models.
描述了割缝筛管防砂机理及割缝筛管筛缝宽度的确定方法,研究了割缝筛管与地层充填砂的配伍性。
It was described to confirm the mechanism of slotted screen liner sand control and its screen fractured width.
磨料射流油井割缝增产技术是利用磨料两相射流机理开发出来的用于油田提高油井采收率的一项技术。
The technique of abrasive jet cutting in oil well are developed to be used in increasing oil production by abrasive two-phase jet theory.
干式等离子切割:又称风冷式切割,采用空压机对板材割缝喷气以达到冷却效果,此类切割成本较低,但是污染很大。
Dry plasma cutting: also called the air-filled type cutting, the air compressor to plank cut in order to achieve the effect of cooling seam jet, such cutting costs low, but pollution is very large.
其结果有利于指导在非均匀载荷作用下割缝的设计,对分析套管变形损坏的机理提供了依据,有利于对套损预防提出有效的建议。
The result is propitious to the optimization design of casing slotting under non-uniform load, and offers a gist for analyzing casing failure mechanism.
对割缝衬管在防砂井中受外挤力作用进行了分析,计算了井底压力(包括流体流经砾石层和割缝衬管的压降) ,建立了衬管割缝参数与割缝条幅弯曲强度及刚度之间的关系式。
The pressure of slotted pipes in a sandy well was analyzed. The bottom hole pressure was computed. A model for computing the bending strength and stiffness of a slotted pipe was proposed.
对割缝衬管在防砂井中受外挤力作用进行了分析,计算了井底压力(包括流体流经砾石层和割缝衬管的压降) ,建立了衬管割缝参数与割缝条幅弯曲强度及刚度之间的关系式。
The pressure of slotted pipes in a sandy well was analyzed. The bottom hole pressure was computed. A model for computing the bending strength and stiffness of a slotted pipe was proposed.
应用推荐