本文提出一种测试复合材料横向剪切弹性模量的参数识别方法。
This paper presents a method to identify transverse shear modulus for composite materials.
水平方向不均匀土的剪切弹性模量的影响较大而其材料阻尼的影响较小。
It is also found that the effects of thickness and shear modulus of the inhomogeneous soil are significant but the effects of the material damping are not significant.
该方法是将复合材料的横向剪切弹性模量视作横向剪应变的函数,由横向剪应变的测量值反演横向剪切弹性模量。剪应变与剪切弹性模量间的函数关系用有限单元法得到。
The transverse shear modulus of the composite material is regarded as the function of transverse shear strain, thus the modulus is inVersely computed by the measured values of the strains.
采用流变仪测定了面包在贮存期间的硬度、弹性及剪切力的变化。
The firmness, elasticity and shearing force of bread by rheometer during storage of bread were determined.
获得纵向剪切下弹性椭圆夹杂问题的精确解。
A precise solution of elastic elliptical inhomogeneity problem under antiplane shear was provided in this paper.
利用能量原理对倾斜的剪切带-带外弹性岩石构成的系统的稳定性进行了研究。
Stability of the system(rock specimen in uniaxial compression)composed of inclined shear band and elastic rock outside the band was analyzed in terms of energy principle.
茂金属聚乙烯的分子链长支化结构对其流变特性有重要影响,长支链可以使熔体弹性和剪切变稀效应明显增强。
The molecular long chain branch structure of metallocene polyethylene has great effects on it's rheological behavior, long chain branch can significantly enhance melt elasticity and shear thinning.
作为实例,给出渤海25、50、100年重现期的平整冰层设计厚度分布、压缩强度分布、弯曲强度分布、剪切强度分布和弹性模量分布。
As samples, the distributions of ice sheet design thickness, compressive strength, flexural strength, shear strength and elastic modulus for ice periods of 25, 50 and 100 years are presented.
采用位错分析法,研究弹性纵向剪切情况下圆域中分叉裂纹问题。
The bifurcated cracks problem in circular region in the case of elastic longitudinal shearing was investigated by using dislocation analysis method.
聚合物溶液的有效粘度由剪切粘度和弹性粘度组成。
The effective viscosity of polymer solution consists of shear viscosity and elastic viscosity.
胞壁弯曲和胞壁缺省对多胞固体产生极大影响,多胞材料的体积模量、剪切模量和弹性模量随胞壁弯曲程度、胞壁缺省的增加显著下降。
The results show that the bulk modulus, shear modulus and elastic modulus decrease remarkably with the increasing degree of wavy and the missing of cell wall.
在此基础上,进一步提出了一种用于预测角焊缝角变形的线弹性简化方法,即剪切固有应变法。
Furthermore, a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion.
岩样的快速回跳条件就是系统(由剪切带及带外弹性岩石构成)的失稳判据。
It is found that the criterion is in agreement with the criterion of instability for the system composed of shear band and elastic rocks outside the band.
根据非局部线弹性理论研究了剪切模量为指数型的无限大功能梯度材料反平面裂纹问题。
The crack problem in an infinite mediums of functionally graded material (FGM) subjected to antiplane shear is studied by using nonlocal linear elasticity theory.
结果表明:提高CFRP的弹性模量、厚度,采用适当的胶层剪切模量、厚度,对提高加固效果显著。
The results showed that increasing the thickness and elastic modulus of CFRP, using moderate thickness and shear modulus of adhesive led to good strengthening effect.
将梁的弹性大挠度弯曲理论应用于蜂窝壁板,研究了大变形条件下蜂窝材料的非线性剪切变形行为。
Basing on the elastic bending theory of beams in large deflection, the non-linear shearing behavior of cellular materials under large deformation is studied in the paper.
作者推导了具有转动弹性连接的杆单元刚度矩阵和荷载转移矩阵,其中考虑了横向剪切效应。通常的两端铰接、两端刚接或一端铰接、一端刚接的杆元刚度矩阵只是作者所推导的刚度阵的一些特例。
In this paper, the stiffness matrix and the loading transfer matrix of frame element with turn elastic connections is deduced, the cross shear effect has been taken into consideration simultaneously.
综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响,利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
在宏观尺度上,弹性模量和塑性参数,包括对塑性孔隙塌陷机理和塑性剪切机理,被表达成水饱和度的函数。
On the macroscopic scale, the elastic modulus and the plastic parameters for both pore collapse and plastic shearing processes are expressed as functions of water saturation degree.
液体弹性波对管道中流动的液体产生压力冲击波,并引起剪切作用。
In the pipeline, the liquid elastic wave can emerge pressured shock wave to flowing liquid and cause shear action.
本文针对特定的地震层位使用连续介质线弹性有限元模型,计算了研究区内主应力和剪切应力的分布。
The distributions of dominant stress and shear stress in research area of a given seismic horizon are estimated by using linear elastic finite element modeling in continuous medium.
通过实例介绍了一种新型的筒仓结构分析设计方法,该方法采用弹性壳单元和考虑剪切变形的梁单元对筒仓结构进行有限元离散和分析。
In this paper, a new method of analysis and design of silo structure is introduced, which USES elastic shell element and shear-considered beam element.
而超高分子量聚丙烯酰胺经剪切后粘度和粘弹性显著下降,建立流动阻力的能力有限。
But the viscosity and viscoelasticity of ultra high molecular weight polyacrylamide decrease significantly. The ability of establishing flow resistance of polyacrylamide is limited after shearing.
弹性-粘塑性模型对反平面剪切扩展裂纹尖端的应力应变场进行了分析。
An elastic viscoplastic model is used to analyse stress and strain fields at the tip of a propagating crack under antiplane shear.
测定了低温下聚氨酯硬泡沫塑料拉伸、剪切和压缩弹性模量与泡沫密度、方向以及温度的关系。
Measurements have been made to determine the relation of the tension, the compression and the shearing of PUR foam at low temperature with its density, direction and temperature.
同时,聚合物溶液经剪切后,粘度损失严重,粘弹性和建立流动阻力能力下降明显。
At the same time, after shearing, the viscosity is lost; viscoelasticity and the ability of establishing flow resistance have decreased.
验证了在剪切应力低于屈服应力时,变形基本上是弹性的,而屈服后粘流过程显示了触变特性。
Elastic deformation occurs at stress below the yield stress, the viscous flow appears after yield with thixotropy.
考察了低分子量阳离子瓜胶凝胶体系的流变特性,结果表明该体系具有良好的粘弹性和剪切变稀性。
Furthermore, the rheological properties of the gel systems were studied. The results show that the gel systems possess fine viscoelasticity and shear thinning property.
考察了低分子量阳离子瓜胶凝胶体系的流变特性,结果表明该体系具有良好的粘弹性和剪切变稀性。
Furthermore, the rheological properties of the gel systems were studied. The results show that the gel systems possess fine viscoelasticity and shear thinning property.
应用推荐