应用结果表明：该专用料质量稳定，成膜性好，剥离强度高，完全能满足国标的要求。
The application result showed the adhesion material had stable quality, good film forming property and high peeling strength. Its performance satisfied quality requirement of national standard.
涂覆应用试验表明，该涂覆专用料产品质量稳定，成膜均匀，剥离强度高，且降低了加工温度。
The test of coat application shows that the film has stable quality, uniform film formation and high peeling strength, as well as lower processing temperature.
本机适用于检验成鞋鞋底和鞋帮之间的剥离强度。
Its used to determine the peeling strength between the sole and the upper of a shoe.
先低温后高温的固化方法有利于提高复合膜剥离强度。
The peeling strength of the composite membrane can be enhanced by changing the solidification heating condition of low temperature first…
实验结果还表明，膜内残余应力的存在降低了剥离强度。
The effect of the residual stress on the peel strength P/b is discussed.
此外，还探讨了引发剂bpo的添加方式对剥离强度的影响。
Besides, the effects of different ways of addition of the initiator BPO in the copolymerization on the peel strength are discussed.
并对试样进行了拉伸强度、剪切强度、剥离强度等多项测试。
And get on multinomial testing to the sample such as tensile strength, shearing strength, peeling strength and so on.
研究了单体配比、增粘剂种类、增粘剂用量对剥离强度的影响。
The effect of monomer ratio, the kind and concentration of keying agent on adhesion strength is also studied.
研究了不同的表面处理方法对基板金属化剥离强度的影响规律。
The effect of different surface treatment on peel strength of substrate has been investigated.
添加后可明显提高初粘力、剥离强度和持粘力，并使之达到最佳平衡点。
After adding can obviously improve the initial bonding strength, peeling strength and cohesive force, and achieves the best balance point.
涂层加工技术对粘合衬布的剥离强度、手感、渗料性等性能有直接影响。
Coating technology can directly influence the properties of the lining cloth such as peeling strength, feel, permeability, etc.
泰盛结构胶具有较强的拉伸、剪切与剥离强度，耐冲击、耐压、抗振动。
Tightsen structural adhesives have excellent tensile, shear and peel strength combined with maximum impact, stress and vibration resistance.
采用SEM、EDS等实验手段分析了化学镀镍层的断面形貌和剥离强度。
The section morphology and peeling intensity of electroless nickel deposit were analyzed by means of SEM and EDS.
用该母粒生产的流延膜，具有遮盖高、细度好、水份少、剥离强度大等特点。
The casting film produced with the masterbatch has the characteristics of high opacity, high fineness, low water content, large peeling strength and so on.
该产品具有低温快速固化的特点，适合于快速高产及需要高剥离强度的应用场合。
It is designed for applications that require a very fast cure at low temperatures. It can be used for high throughput production processes and applications where high peel strength is desired.
方法以感官指标总评和剥离强度为指标，应用正交设计法，优选各因素的最佳条件。
Methods With the peeling strength and the feeling observes as the indices for overall evaluation, the optimal conditions of various factors were optimized by orthogonal design.
根据本发明提供耐磨性好、同时剥离强度与柔 软性好的皮革样片状物及其制造方法。
Thus, there can be provided a leather-like sheet material that excels in abrasion resistance and also in peel strength and flexibility, and provided a process for producing the same.
附着力、剥离强度、色差、冲击强度保留率等指标能比较全面的表征彩色型材的耐候性能。
Adhesive power, peeling strength, chromatic aberration, impact strength retention rate and other indicators can be more comprehensive characterization of color profiles of weathering resistance.
采用正交实验法研究硼砂和TDI的加入量对PV A粘合剂的耐水性能和剥离强度的影响。
Using the orthogonal matrix experimental method, the effects of borax or TDI on the PVA adhesive were discussed.
对钢丝缠绕增强塑料复合管应变、剥离强度、临界失稳压力、不同温度下的失效形式等进行了试验研究。
Strain, peel strength, critical buckling pressure and failure mode under various temperatures of PSP were investigated using experiments.
本文根据作者提出的细观单元有限元研究的结果，建议了一组新的界面本构模型以及界面剥离强度计算公式。
In this paper, a group of new models and the formulas for calculating the debonding strength of interface are presented based on the predictions of a mesoscale finite element model.
在此基础上，利用单片计算机技术，研制出测试原理更为先进并具有数据自动处理功能的专用剥离强度测试仪。
On the basis of improved the testing principle, a specialized and automatic data processing peeling strength tester has been developed by using single -chip computer technology.
测试结果表明氧化改性后的SBS，主链的双键被打开，引入了极性基团，其T型剥离强度提高了71.44%。
The results showed that the double bonds were opened, and made the main chain to have high polarity. The T-peel strength was raised 71.44% after modified.
采用此方法增韧的环氧树脂，贮存稳定性好，在加热及室温条件下固化，均能获得较高的剪切强度和T -剥离强度。
The epoxy resin toughened by the above copolymer has excellent storage stability and, after cured by heating or at room temperature, it has higher shear strength and T-peeling strength.
本文制备湿固型MDI- 聚醚基聚氨酯热熔胶，研究了MDI-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。
The hot-melt moisture cure PU adhesives have been prepared. The effects of the structure of the MDI-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.
最先引入了线剥离强度和面剥离强度两个附着力性能评价参数，通过建模推导出计算公式，从而给出了附着力检测评价标准。
By modeling, the formulas for calculating the line peel-off intensity and the plane peel-off intensity were deduced, and the standard to estimate the bonding strength was put forward.
最先引入了线剥离强度和面剥离强度两个附着力性能评价参数，通过建模推导出计算公式，从而给出了附着力检测评价标准。
By modeling, the formulas for calculating the line peel-off intensity and the plane peel-off intensity were deduced, and the standard to estimate the bonding strength was put forward.
应用推荐