本文重点研究WCDMA中的切换技术。
本文重点研究了CDMA系统越区切换技术。
采用虫孔切换技术容易造成互连网络寻径的死锁。
The interconnection networks which USES the wormhole switching technology can easily make deadlock.
提出了一种新的基于无缝切换技术的可分级码流切换方法。
A novel seamless switching method of scalable video stream is presented.
因为可以使用CSS控制这两种布局，所以我们选用一种简单的样式切换技术。
Since we could control both layouts using CSS, we chose to use a simple style-switching technique.
系统设计涉及两项关键技术：一是无线信道优选及信道自动切换技术。
The systemic design is related to two key techniques:One is for optimum seeking and automatic switching of wireless channels.
四节点的协作通信切换通用模型解决了切换技术在协作通信中的实现问题。
The general handoff model with four nodes for cooperative communication resolves the implementation problem of handoff technology for cooperative communication.
故障检测技术、仲裁和切换技术是DCS系统实现模块冗余的关键，同时也是难题。
Technologies of fault detection, arbitration and switching are critical issues and difficulties for implementing module redundancy in DCS.
异构网间切换技术正是解决该问题的有效方法，也是建设B3G的关键技术挑战之一。
Vertical handoff mechanism is a valid method to the question, and also one of main technical challenges to the construction of B3G.
从分析双机冗余计算机系统的故障诊断及切换技术出发，提出三冗余全同比计算机控制器。
Through the analysis on the fault diagnostics and changeover technologies for redundant computers, the computerised triple redundant controller with fully equal comparison is presented.
本文首先分析了UMTS和WLAN的网络特性，深入研究了这两种网络内部的切换技术。
First, the characteristics of UMTS and WLAN and their handoff mechanisms are analyzed in the paper.
发现这些切换技术虽然各有特色，但都没有考虑到移动节点在乒乓移动模式下的切换性能。
Finding those handover technologies have its advantage but they do not satisfied the performance in Ping-pong movement.
切换技术是UMTS关键技术之一，它是保证用户在移动通信网络中具有移动性的必不可少的方法。
Handover technology is the key technology in UMTS, and it is absolutely necessarily in guaranteeing the subscribers moving freely in mobile communication system.
重点介绍了指挥站测控与监控系统、方向盘力反馈技术、无缝隙切换技术，以及数据与图象无线通信系统。
The control and monitor subsystem, the force feedback technique for steering wheel, the smooth switching for motion mode, and the telecommunication subsystem are detailed in the paper.
在不改变现有软切换过程的基础上，改善了现有软切换技术的性能，减少了通话的掉话概率，提高了通信质量。
On the basis of no changing existent soft switching process it improves the performance of existent soft switching technique, reduces the probability of talk off and can raise communication quality.
LUN - level切换技术只有在使用DS8000存储服务器环境下才能采用，它可以在分区间或在系统间切换IASP。
LUN-level switching is only available when using the DS8000 storage server and can switch the IASP between partitions or between systems.
提出了基于多协议标记交换（MPLS）的端到端自适应移动IP（MIP）快速切换技术，旨在提高基于MPLS移动IP的灵活性与可扩展性。
An end-to-end adaptive multi-protocol label switching(MPLS)-based fast handover method for mobile IP(MIP) was proposed to improve the flexibility and scalability of MIP over MPLS.
在介绍实时高可靠应用系统传统处理模式的基础上，描述了一个利用集群技术实现的实时多任务双工系统所采用的基本工作流程、故障的判定方法和双缓冲切换技术。
This paper introduces a real time multitask duplex system realized by cluster, and describes the basic flow, methods to decide machine fault, dual buffers technology to make switching.
提出了2.4G无线影音传输系统中的数字音频传输方案，介绍了AES/EBU数字音频接口标准，并详细阐述了系统的关键技术，包括差错掩盖技术和天线切换技术。
The paper brings forward a digital audio transmission plan on the 2.4 G wireless video and audio transmission system, and AES/EBU digital audio interface standard is also introduced.
该技术隔开了硬件与软件，让许多程序跑在任何机器上，甚至切换这些机器。
This separates software from hardware, allowing many programs to run on any machine, and indeed to switch between them.
此时它会应用一项技术，即当前栈替换(On Stack Replacement,OSR)，从而切换到新代码的执行上。
It then USES a technique known as on Stack Replacement (OSR) to switch to the execution of the new code.
当使用nfsv3时，可以使用两项技术提供更合适的故障切换操作。
When using NFSv3, you can use two techniques to provide a more appropriate failover behavior.
许多使用PowerHASystemMirror 的客户会定期从生产节点切换到备份节点，这些技术让他们对自己的灾难恢复计划更加有信心。
Many customers using PowerHA SystemMirror switch from production to backup regularly, giving them added confidence in their disaster recovery plans.
在POWER7 之前，存在这种技术的第三种变体，就是在HSL循环上使用一个可切换的存储塔，但是 POWER7硬件已经不再提供此选项了。
Prior to POWER7, there was a third variation of this technology, utilizing a switchable storage tower on an HSL loop, but that option is no longer available on POWER7 hardware.
依照技术专家对所需细节的看法，您应当在模式之间进行切换。
Based on the technical expertise and the view on the required details, you could switch between the modes.
应用dds技术可实现相位连续的快速频率切换。
DDS technology can switch frequency fastly in phase continuous.
基于模型预测控制技术的MCC是一种带有约束、多变量和灵活控制任务切换的优化控制器。
Based on model predictive control techniques, MCC is a multivariable constrained optimal controller with easy task switching.
此外，本章还讨论计算不确定度、最小化开关时间的技术，以及冷切换和热切换的对比。
In addition, this section discusses issues such as calculating uncertainties, techniques for minimizing switching time, and the use of cold vs. hot switching.
由于切换的是高阻抗，所以切换小电流(5.3.1部分)和高阻抗电压(5.2.3部分)时采用的技术也同样适用。
High impedances are being switched, so some of the same switching techniques used when switching low current (Section 5.3.1) and high impedance voltages (Section 5.2.3) are equally applicable here.
由于切换的是高阻抗，所以切换小电流(5.3.1部分)和高阻抗电压(5.2.3部分)时采用的技术也同样适用。
High impedances are being switched, so some of the same switching techniques used when switching low current (Section 5.3.1) and high impedance voltages (Section 5.2.3) are equally applicable here.
应用推荐