• 骨头上切割痕迹的详细分析显示,它们与食肉动物留下的牙齿痕迹与爪痕存在本质的区别。

    Detailed analysis of the cut marks on the bones show they differ substantially from tooth and claw marks that can be left by predators.

    youdao

  • 实验室工作人员和我们的内部金相实验室的设备也扩大到包括切割,抛光,腐蚀和金相分析。

    Laboratory staff and our in-house metallographic laboratory equipment are also expanded to include cutting, polishing, corrosion and metallographic analysis.

    youdao

  • 水平井生产管电化学切割动态分析及参数选择。

    Dynamic analysis and parameters selection of electrochemical cutting of production pipe in horizontal hole.

    youdao

  • 采用实空间原子切割方法分析了阳离子和阴离子基团对光学性质的贡献。

    A real space atom cutting method is adopted to analyze the respective contributions of the cation and anionic groups to optical response.

    youdao

  • 在综合分析切割粒径、压降、效率和分股比数学模型的基础上,建立了旋液分离器的设计模型。

    Based on synthetically analyzing models of reduced cut size, pressure drop, efficiency and flow split, the design model of hydrocyclone separators has been developed.

    youdao

  • 通过对短纤维切割工作原理的分析,建立了化纤生产中切断刀锋利性能变化的数学模型。

    Based on the analysis of the cutting principle of staple fibre, a mathematical model affecting the sharpness of cutter blades is established.

    youdao

  • 对兴山矿二水平四石门中15层区构造进行力学分析,揭示区内断层在空间上的展布、相互切割关系及其规律性。

    The structure of No. 15 layer in Xingshan mine is analyzed with mechanics, and the fault distributed in space, interaction cutting relation and rule are revealed.

    youdao

  • 对全喂入水稻联合收割机切割机构进行了运动学和动力学分析,建立计算模型。

    In this paper, kinematic and dynamic analysis of crank-coupler cutting mechanism of full-feeding rice combine were made, and their computing models were set up.

    youdao

  • 粗骨料粒径分布对混凝土强度分析有重要影响,但如果不用切割方法,混凝土内粗骨料三维粒径分布测量就无法实现。

    Coarse aggregate size distribution is important for the research on concrete strength analysis. Usually it can not be obtained without cutting a part of concrete down.

    youdao

  • 对一种大功率IGBT逆变式空气等离子切割电源的主电路进行了原理分析与设计。

    The paper analyzes and designs the main circuit of high-power IGBT inverted air plasma cutting power supply.

    youdao

  • 本文分析了禾秆处理的几种方案,研究了切割及放铺的合理工况,对于禾秆处理问题的解决具有积极的意义。

    In this paper the author analyses several schemes for solving the problem, researches the reasonable conditions of cutting and swathing, this will have an active effect on tackling the problem.

    youdao

  • 分析了激光切割筛管过程中常见的质量缺陷及产生的原因,并提出了工艺解决方案。

    The paper analyzes the causes of common quality defects in slotted screen laser cutting, and advances preventive measures against the defects.

    youdao

  • 通过插值切割法对其中东部次海盆和西南次海盆的磁异常进行分析。

    Using the interpolation cut method, the anomalies of the Eastern Sub basin and the Southwestern Sub basin are analysed.

    youdao

  • 运用图像分析和模式识别技术,实现非接触式的方坯自动定尺切割。

    The technology of using image analysis and pattern recognition to implement the non-touching automatic billet cut-to-length is mainly introduced.

    youdao

  • 本文通过正交试验探求了该方法提高切割效率的可行途径,并分析指出了该方法的局限性。

    This article studies the feasible approach to improve the cutting efficiency with orthogonal testing, meanwhile, and figures out the limitation of this approach as well.

    youdao

  • 从不同角度对我国水射流清洗切割的现状作了较为全面的分析。

    The present situation of water jet technology of our country is analyzed comprehensively in various ways in this paper.

    youdao

  • 理论分析和试验结果表明切割深度随着切割速度的减小而增加,随着激光功率的增加而增大。

    Theoretical analysis and experimental results all indicate that cutting depth is increasing with the decreasing of cutting speed and increasing of laser power.

    youdao

  • 文章对比分析了当前可以采用的水下切割技术,指出射流切割更具有发展潜力。

    In this paper, several kinds of cutting techniques are analyzed and compared. Although all techniques may be practiced underwater, the water jet cutting is advanced and better.

    youdao

  • 对脆性材料的切割机制进行研究,建立切割冲蚀模型,分析受冲击区的应力。

    The mechanism of cutting brittle materials was studied, the impact model was established and the stress of impacting area was analyzed.

    youdao

  • 对利用玻璃纤维网片作为增强基材的薄片切割砂轮强度进行了力学分析,给出了玻纤网片对薄片切割砂轮增强作用的定量计算公式。

    This paper presents a mechanical analysis of the cutting grinding wheel strengthened with glassfiber meshes and the formula to calculate the strengthening effect of the glassfiber meshes.

    youdao

  • 分析了高速走丝线切割加工中影响加工精度与表面质量的主要因素,并针对这些原因分别给出各自有效的预防及处理方法。

    The main factors that affect the machining precision and surface quality in high-speed wire cutting are analyzed. And the corresponding effective precautionary measures and handling methods are given.

    youdao

  • 分析了LGK系列空气等离子弧切割机的使用方法,例举了其引弧故障、主电路故障、气路故障、割枪故障产生的原因和解决方法。

    This paper analyses the usage of LGK series of air plasma arc cutting machine, and enumerates the causes and solutions of striking arc, main circuit, gas path and cutting torch breakdown.

    youdao

  • 在对管切割中影响尺寸精度和相贯线形状的误差源进行分析的基础上,提出了一种示教再现的误差补偿切割方案,并建立了相应的误差分离模型。

    Based on analysis of error sources which influence pipe-cutting precision, a scheme of teaching and reappearing cutting is advanced and the corresponding error separating models are founded.

    youdao

  • 本文介绍了快走丝线切割加工质量的评价体系,分析了影响快走丝线切割加工质量的因素,并提出了几种解决措施。

    In this article, the valuation system of high speed WEDM machining quality was introduced, the factors effecting high speed WEDM machining quality were analyzed and several solutions were put forward.

    youdao

  • 方法:采用回顾性方法对71例腕部切割伤患者的功能障碍原因和表现进行分析。

    Methods: the data of general clinical manifestations and reasons of the disability induced by wrist cut in 71 patients were retrospectively analyzed.

    youdao

  • 本文在分析传统的印刷开槽机切割系统存在的问题基础上,针对其存在的问题提出了一种基于运动控制的精确切割系统的设计方案,并给出了相应的软硬件实现方法。

    This paper analyses problems of the traditional printing and fluting machine cutting system, and puts forward a new solution based on motion controller. Both the hardware and software are designed.

    youdao

  • 对管-管相贯、K形接头相贯的切割实例进行了仿真分析,研究了割炬轨迹和相关参数的关系。

    The real cutting examples about intersection of pipe-pipe and K type are simulated and analyzed, and the relationship between torch track and related parameters is studied.

    youdao

  • 对管-管相贯、K形接头相贯的切割实例进行了仿真分析,研究了割炬轨迹和相关参数的关系。

    The real cutting examples about intersection of pipe-pipe and K type are simulated and analyzed, and the relationship between torch track and related parameters is studied.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定