• 切削试验和用户试用结果表明,该系列刀片具有优异的切削性能。

    Results of cutting experiments and consumer's tryouts indicate that the cutting performances of this insert series are excellent.

    youdao

  • 通过切削试验,确定了合理的工艺参数。

    Appropriate processing parameters are established through cutting test.

    youdao

  • 在分析PCD刀具切削模型的基础上进行了切削试验。

    The cutting model of PCD cutting tool was analyzed and some experiments were done.

    youdao

  • 最后将薄膜热电偶温度传感器用于化爆材料模拟切削试验。

    At last, TFT are applied to the chemical explosive material simulation cutting test.

    youdao

  • 结合切削试验和实践,讨论了热喷涂涂层机械加工的一般原则。

    By combining with cutting test and practice, the criterion of machining of the hot spraying coating is discussed.

    youdao

  • 传统切削研究中,主要是从切削理论和切削试验两种方法来进行。

    The conventional study begins with the theory and the experiments of metal cutting.

    youdao

  • 对同种材料不同涂层和不同材料同种涂层的刀具进行了切削试验。

    The tooling test was performed for the tools made of the same material with different coatings as well as the tools made of different materials with the same coating.

    youdao

  • 介绍了高性能熔炼高速钢的种类与性能。列出了某些切削试验数据。

    The kinds and properties of super-hard smelting high speed steels are introduced. Soime data of machining tests are listed.

    youdao

  • 用细晶粒硬质合金刀具进行了铁基粉末冶金零件的高速干切削试验。

    The dry and high-speed cutting experiments are carried out to study the cutting performance of turning the Fe-based PM parts by using the fine grain cemented carbide inserts.

    youdao

  • 攻丝扭矩模拟评定试验方法为真正的切削试验,与切削加工的相关性较强。

    The tapping torque test is a real cutting test, it has a good relativity with cutting process.

    youdao

  • 在理论分析之后,叙述了切削试验验证的情况,理论与实际取得了很好的一致。

    The result of actual cutting test shows that theory is consistent with practice.

    youdao

  • 运用正交试验方法对半球形零件进行切削试验,采用方差分析法分析试验结果。

    The machining experiment is made on semi-spherical part by orthogonal test method. The results of test are analyzed by variance analysis.

    youdao

  • 利用所研制的快速伺服刀架、计算机控制系统,在超精密车床上进行了切削试验。

    The cutting experiment is proceeded with a self-made fast servo tool and a computer control system on ultra-precision lathe.

    youdao

  • 本文通过粗糙度切削试验,分析讨论了车床主轴油膜减振支承对其加工粗糙度的影响。

    This article analyses the influence of the support of oil film vibration damping of the main spindle on cutting degree of roughness through cutting test.

    youdao

  • 高速切削试验表明:切削速度的提高和每齿进给量的减少有利于改善加工表面粗糙度。

    The experiment showed that the high quality surface roughness was easy to obtain by increasing the cutting speed and decreasing the feed engagement.

    youdao

  • 通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验,探讨其切削性能。

    Using diamond film coated tool, the dry-cutting tests are carried out on Si-Al alloy with different Si-contained. The cutting properties are studied.

    youdao

  • 设计了一组用“V”字形刀具横切工件的切削试验,以验证排屑速度干涉对切削力的影响。

    A series of experiments are designed of plunge cutting work-pieces with V-shaped cutters to investigate the impact of chip-ejection speed interference on cutting forces.

    youdao

  • 经静态及动态的标定和实际的切削试验证实,该测力台的主要性能指标符合CIRP的规定。

    Static and dynamic calibrations and actual cutting tests have confirmed that the main performance figures of the dynamometer meet the specifications recommended by CIRP.

    youdao

  • 文中通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验,探讨其切削性能。

    In this paper, the dry-cutting tests were carried out by diamond film coated tool on Si-Al alloy and this tool's cutting properties were studied.

    youdao

  • 在用金刚石锯片切割工程陶瓷材料的切削试验基础上,对影响切削力的各种因素进行了分析。

    Based on the experiments of cutting engineering ceramics by diamond saw blades, the factors of influencing cutting forces are analyzed.

    youdao

  • 通过切削试验,研究了限制接触刀具前刀面的刀—屑接触长度逐渐减小时切削力的变化规律。

    Through cutting experiments in which the contact length between chip and rake face of restricted contact cutter is reduced step by step, the variation principle of cutting force is studied.

    youdao

  • 通过切削试验,分析了切削速度、背吃刀量以及切削液等参数改变时,对切削力及表面质量的影响。

    Through cutting experiment, the influence on cutting force and surface quality was analyzed when change the parameters such as cutting speed, back cutting depth and cutting fluid and so on.

    youdao

  • 将氮化碳涂层刀具应用于干切削领域,通过对淬火钢的干式切削试验,研究氮化碳涂层刀具的切削加工性能。

    The cutting experiments show that in cutting of quenched steel the tool life of this cutter is longer than that of uncoated cutting tool.

    youdao

  • 介绍了一种大型齿圈齿形加工的新方法,并对其加工原理、主要参数的选择计算和切削试验结果进行了分析。

    This paper introduces a new method cutting the profile of tooth of large gear ring, which has no upper limit diameter.

    youdao

  • 切削试验表明:具有梯度结构涂层硬质合金刀片的切削性能比无梯度结构涂层硬质合金刀片的切削性能更为优良。

    The cutting tests demonstrate that the cutting property of the coated cemented carbide with gradient structure is much better than those without gradient structure.

    youdao

  • 通过对切削试验结果的分析,认为PCD刀具后刀面刃磨质量直接影响切削表面质量,而对PC D刀具寿命的影响则相对较小。

    By analyzing the results of the experiments, it is considered that flank surface quality of PCD cutting tool directly influences machined surface quality, but has few effects on cutting tool's life.

    youdao

  • 以此为基础,在国产CD 6140a型车床上对C3602铅黄铜进行了正交切削试验,分析了各因素水平对工件表面粗糙度的影响。

    On this basis, the orthogonal test of leaded brass C3602 was made on the domestic lathe CD6140A and the influence of various factors and levels on surface roughness was analyzed.

    youdao

  • 通过切削试验研究了超声激振双刃镗刀镗削深孔的过程和效果,分析了超声激振双刃镗削的切削机理,讨论了切削参数对加工表面粗糙度的影响规律。

    Based on the cutting experiment, the process and effect of ultrasonic vibration boring for precise deep holes by using the double-edge boring cutter are researched.

    youdao

  • 应用试验结果表明,使用研制的低油雾切削油可使车间油雾浓度平均下降约50%。

    The application test results show that the newly developed low mist cutting oil can reduce the mist concentration by about 50 percent on average in the workshop.

    youdao

  • 对三维光弹性试验的有关工艺,如材料制造、切削加工、冻结、切片等方面也提出了看法。

    The authors however express their views on the technology of the three dimensional photoelastic test, such as material manufacturing cutting process, freezing and sectioning.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定