小刀冰凉的刀尖。
这里是一杆的我如何建立起刀尖圆弧半径。
那刀尖很锋利。
主要讨论怎样用刀尖圆弧半径补偿功能来消除误差。
This paper is mainly on how to remove inaccuracy by compensating the corner radius.
但这会和减少通过刀具散发的热量一样减少刀尖强度。
This reduces the strength of the tool tip as well as the heat dissipation through the tool.
数控车床刀具补偿包括刀具位置补偿和刀尖圆弧半径补偿。
The CNC lathe tool compensation includes tool position compensation and tool radius compensation.
虽然也有硬质合金刀尖的钻头，麻花钻一般用高速钢制成。
Twist drills are usually made of high-speed steel, although carbide-tipped drills are also available.
镗刀的尾出部分应小于刀尖伸出部分，否则会影响镗削加工。
The boring part should be less than the tail tip extension, otherwise it will affect the boring.
发现涂层脱落、刀尖破损、扩散磨损为微径铣刀的主要磨损形式。
The coat shed, tool tip breakage, diffusive wear have been observed as the main form of tool wear.
金属的实际分离始于屈服或断裂(视切削条件而定)，从切削刀尖开始。
The actual separation of the metal starts as a yielding or fracture, depending upon the cutting conditions, starting from the cutting tool tip.
我们打散蛋黄，加入少许油，再加入糖和盐调味，刀尖蘸一点芥末，然后放入一勺醋。
We beat up yolks, adding oil little by little. Then salt and sugar to taste, mustard on the tip of a knife and a tablespoonful of vinegar.
若采用刀尖圆心偏程方式，可进行加工补偿，以达到提高加工精度的目的。
Adopting tool nose centre programming and machining compensation can get the target for improving machining accuracy.
本文用矢量代数法推导出刀具刀尖安装得较高或较低时工作角度的计算公式。
In this paper, the formulas of working angles of the cutting tool for tool nose locating position changes are derived from vector method.
本文从刀尖圆弧刃车削判定式及光洁度计算式出发，制作出了两幅诺谟图解。
According to the discriminating and evaluating equations of the surface finish in turning by the circular nose cutting edge, two nomographs are constructed in this paper.
要知道一枝刀剑是否针对破甲之用，最主要不是看剑锋刀锋，而是看剑尖刀尖。
To distinguish a sword is used for cleaving the armors or not, the most prominent mark is tip of the blade, but not the edge.
可将刀尖位置数据输入到系统，大大减少对刀换刀的辅助时间，提高工作效率。
The blade edge position data can be input to the digital control system, which greatly reduce the auxiliary time of tool setting and tool replacing and enhance work efficiency.
结果表明，刀刃钝圆半径越小，刀尖越锋利，但是磨损较快，切削力很快增加。
The results indicate that the cutting corner radius is lesser, the tool is sharper, but it wears out quickly and makes the cutting force increases.
文章分析了刀尖安装高度对工件径向尺寸误差的影响，并提出了编程解决办法。
This paper analyzes the influence of tool's installing height on the radical size of the workpiece and the programming solution is also presented.
车削刀具可以是精车刀具或粗车刀具。粗车刀具刀尖半径较小，用 于深切削。
Turning tools. Turning tools can be either finishing or rough turning tools. Rough turning tools have small nose radii and are employed when deep cuts are made.
硬质合金刀尖（或陶瓷刀尖）根据采用它们的机加工操作，可以有不同的形状。
The carbide tips (or ceramic tips) can have different shapes, depending upon the machining operations for which they are to be employed.
他从衣袋里摸出一把一折两的小刀，用刀尖在石灰墙上刻下了“玻璃厂街，十六号”。
He searched in his pocket, pulled out his penknife, and with the blade he wrote on the plaster of the wall.
相对于回形刀刃的凹曲线而言，这种刀刃具有一条延伸到刀尖的、温和的凸斜率曲线。
This blade has a gentle, sloping convex curve to the point versus the concave curve of the clip blade.
刀尖是刀具中最薄弱的环节，提高刀尖及切削刃的强韧性对改善刀具切削性能尤其重要。
So improvements of the obdurability of the tool tips and cutting edges are very important to better the cutting property of the end mill.
在实际生产中要加以注意，并通过编程以补偿刀尖圆弧半径的变化，消除误差，使问题得以解决。
In the production practice, this problem should be kept in mind and resolved by programming for compensating the variation of tool nose curvature radius and removing the error.
在实际生产中要加以注意，并通过编程以补偿刀尖圆弧半径的变化，消除误差，使问题得以解决。
In the production practice, this problem should be kept in mind and resolved by programming for compensating the variation of tool nose curvature radius and removing the error.
应用推荐