对蜜饯冷铁有一些基本方法厂能源。
There are several basic ways to conserve chiller plant energy.
简单流行于黄金时代，狡诈兴盛于冷铁岁月。
Simplicity flourished in the golden age, cunning in these days of iron.
球铁前轮毂和差速器原采用手工造型，用外冷铁解决缩孔缺陷。
Manual molding had been used for the nodular iron front wheel boss and differential mechanism case, and chills were used to prevent shrinkage defects.
简要介绍了一种适合于大断面球铁悬浮铸造用微型冷铁的制备工艺；
The producing process of a kind of micro-chill suitable for suspension casting of heavy section ductile iron is briefly described.
如果蠕化处理程度和冷铁激冷能力无法形成球墨层者，使用效果较差。
If the compacted treatment degree and chill capacity of chiller are not enough to obtain fine spheroidal graphite layer, the service life of glass mold is short.
介绍均衡凝固的基本原理，叙述铸件结构、冒口位置和冷铁对补缩的影响。
The basic principle of the proportional solidification theory was introduced, and the influences of casting construction, feeder position and chill on feeding effect was described.
本文以生产实践为依据，介绍了大块间接外冷铁在轧机牌坊上的应用及工艺措施。
In this paper, according to production practice, the application of bulk indirect external iron chill and the technological measure in mill housings are introduced.
业已查明，缺陷是由于采用冷冒口工艺所致，因为冷冒口实际上起排放冷铁液作用。
It has been found out that the defect was caused by adopting the foundry method with a cold riser which actually acted as a cold metal bleeder.
根据均衡凝固理论设计工艺，采用阶梯式浇注系统，压边冒口和冷铁，取得了满意效果。
The foundry method was designed based on the Proportional solidification theory. Step gating system, connor risers and chills were adopted. Successful result was obtained.
在容易产生这种缺陷的部位设置冷铁，使该部位不与树脂砂接触，因而能避免上述缺陷产生。
By setting chills on the defect locations to isolate the molten iron in those areas from contact with the resin sand, the defects were successfully avoided.
在分型面确定的基础上，完成了凸轮轴铸件相应冷铁的结构优化设计，并详细的介绍了其优化过程。
Based on determining of mold joint, the thesis finished the structure optimization design of chill, and introduced the process of optimization in detail.
对引起缩松的原因进行了分析，并采取了相应的工艺措施，上下底面同时加冷铁，消除了缩松缺陷。
The reason causing shrinkage defect was analyzed, and the following measure was adopted: setting chills on both the top and bottom surfaces of the casting.
根据数值模拟结果并结合理论分析，通过加大冒口颈与冷铁的尺寸和增设冒口方法，对铸造工艺进行优化。
According to the results and combining with theoretical analysis, the casting process was improved by increasing the size of riser neck and chills and adding the number of the riser.
通过对铸钢件外冷铁标准的制定和应用情况的介绍，提出了节约成本、简化工艺、提高质量的一条重要途径。
Through the introduction of formulating standard and the use of external iron chill in cast steel, the paper pointed out a way for saving cost, simplifying working processes and improving quality.
详细介绍了采取顶注式浇注系统、成形外冷铁、复合铸型、组芯造型的铸造工艺，成功地生产出批量铝叶轮。
The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.
除了喝不加冰的美味冷牛奶，你也可以把它用来煮拿铁，做沙冰，或是加到热可可里。
Besides drinking milk straight-up, nice and cold, you can use it for lattes, in smoothies and in hot cocoa.
提高冷却速度和降低终冷温度可以增加针状铁素体的比例。
The ratio of acicular ferrite may increase by raising cooling speed and decreasing final cooling temperature.
为合理利用硫酸烧渣中的铁资源，进行了煤基直接还原生产金属化团块的研究，提出了润磨造球-预热焙烧-磁选-冷固结成型的新工艺流程。
Aimed at utilization of iron resources in pyritic slag, the study on production of metallized agglomerate with pyritic slag through coal based DR process was conducted.
使用冷牛奶时，你正在拿铁或浓咖啡。
采用合金化、金属型快冷手段获得铸态贝氏体白口铁磨球。
A kind of the grinding ball from bainite white iron as cast was achieved by alloying and metal molding.
因为山顶气候冷且多风，所有的瓦片都是由铁或铜制成。
Because it is cold and windy on the summit the mountain, all the tiles were made of iron or bronze.
开发了一种采用树脂砂壳型铸造的激冷球铁凸轮轴。
A sort of chilled nodular iron camshaft was developed by adopting resin-coated sand shell mould casting process.
概述了作为钠冷快堆结构材料和包壳材料的国产奥氏体不锈钢以及作为蒸汽发生器管材的铁素体低合金钢与高温钠相容性研究的主要结果和现状。
Main results and situation of the compatibility investigation for austenic stainless steels and ferritic low alloy steels with high temperature sodium are summarized in this paper.
该产品是在老一代铁沟捣打料基础上开发成功的，具有冷态和热态温度高、抗氧化性和抗渣性好，使用寿命长的特点。
The product is researched successfully based on old ramming castable. Which own higher temperature of cold state and hot state, good inoxidizability and slag resistance, and long service life.
研究了化学成分和孕育处理对激冷球铁凸轮轴组织和性能的影响。
The influence of chemical composition and inoculation on the microstructure and properties of chilled ductile iron camshaft was investigated.
可能的对策有：(1)进口废钢和直接还原铁；(2)国内建设直接还原铁厂；(3)使用冷生铁；(4)铁水热装。
The available measures may be: 1 Importing scrap and direct reduced iron DRI, 2 constructing DRI plant at home, 3 using cold pig iron, 4 charging hot iron.
我们现在向您介绍的拿铁艺术，一个地方的世界里古怪和普通碰撞，一个恶狠狠地热与冷的温度融合和计算艺术家有条不紊的性质。
We now introduce you to the world of Latte art, a place where eccentric and ordinary collide, a fusion of ferociously hot temperatures and the cold and calculating methodical nature of the artist.
介绍了马钢一铁总厂抽风环冷机存在的问题及进行整体优化改造的必要性。
Existing problems in the annular cooler at the No. 1 General Ironmaking Plant of Masteel and the necessity of overall optimization reformation are presented.
介绍了马钢一铁总厂抽风环冷机存在的问题及进行整体优化改造的必要性。
Existing problems in the annular cooler at the No. 1 General Ironmaking Plant of Masteel and the necessity of overall optimization reformation are presented.
应用推荐