可移动锅架采用冷轧板陶瓷的。
Removable cooking rack of cold-rolled plates using ceramics.
灯架采用优质冷轧板表面喷涂而成。
The lampstand uses the high quality cold rolled plate surface spray coating to become.
优质冷轧板,表面喷粉处理。
箱体采用优质冷轧板焊接成形、表面静电喷涂;
The box body is formed by welding using high-quality cold-rolled sheets, and the surface is painted using electrostatic coating.
冷轧板带的产品厚度精度是其一个重要的质量指标。
The accuracy in gauge of the cold rolling strip is one of the most important quality index.
引进配套建设的冷轧板带机组的主要工艺技术特点。
The main process characteristics of cold rolled strip mill train imported for supporting construction are introduced.
镀锡板就是在冷轧板的表面电镀一层均匀致密的锡层。
Tinned sheet is cold rolled sheet whose surface is electroplated with a layer of uniform and dense tin.
是一家专业生产冷轧板、不锈钢板材、卷板的中型公司。
Is a professional production of cold-rolled plates, stainless steel plates, sheet of medium-sized companies.
介绍冷轧板带退火工艺的特点,探讨柳钢冷轧板带退火的设备选择。
The characteristics of cold-rolled strip annealing practice have been introduced, and the equipment selection of old-rolled strip annealing has been discussed.
对冷轧板中发现的条痕缺陷特征进行了分析,探讨了该缺陷的形成原因。
The characteristics and forming reason of faint-sliver defect found in cold-rolled steel sheet were discussed.
低碳铝镇静钢(LCAK)常用于生产冷轧板,要求铸坯有高的洁净度。
High cleanliness is required for low carbon aluminum killed (LCAK for short) steel which is widely used for production of cold rolled sheet.
同时出口建筑用彩涂板、镀锌板、冷轧板已跟国外多家客户保持长期合作。
In the meanwhile, we also export the colored coated plate, galvanized plate and cold-rolled sheet for building and has established long-term cooperative relationship with many foreign customers.
对生产中常见的低碳铝镇静钢冷轧板孔洞缺陷特征进行了宏观和微观分析。
Technology and installations for the production of cold rolled sheet at PZH Steel were introduced.
在ST12冷轧板上用线切割加工出不同深度的狭缝来模拟钢板中缝类缺陷。
Slots with different depth were made by WEDM in metal sheet of ST12 to simulate slot-type defects.
用扫描电镜、化学和小样电解法分析了IF钢冷轧板表面条状缺陷特征及成因。
The character and cause of sliver defect on IF steel sheet surface are studied by means of SEM, chemical analysis and electroanalysis.
外壳采用冷轧板、内胆及上盖采用优质不锈钢板冲压焊接制成,表面静电喷涂。
The outer is made of cold rolled plate, container and cover made of quality stainless steel plate stamping and welding material, the surface electrostatic spraying.
我们利佩茨克工厂和维兹工厂里使用热轧钢板生产冷轧板卷和其他高附加值产品。
We use hot-rolled steel to produce cold rolled coils and other high-value added products at the Lipetsk plant and VIZ-Stal.
实验结果表明,除各向异性指数外,SPCE冷轧板的成形性能均优于SPCD。
It is showed from the result that the forming property of SPCE is better than that of SPCD except anisotropy index.
本系列电阻炉外形均为长方形,炉壳系采用角钢、冷轧板焊接制成,表面静电喷涂。
This series of resistance furnace shape is rectangular, the furnace shell with Angle steel, cold-rolled plate made of the welding, surface electrostatic spraying.
本文提出了一种转动结构用于铜合金冷轧板带残余应力检测以及面内形变的测量方法。
In present paper a new rotating-structure was introduced to detect local residual stress and in-plane deflection in thin cold-rolled sheet of copper alloy.
在实验室条件下,研究了罩式退火工艺对SPCC- SD冷轧板组织和性能的影响。
The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions.
因此,如何解决攀钢冷轧板厂用原料(大直径热轧板卷)的铁路运输问题就成了当务之急。
So, it is very important to solve this problem of providing raw material (large-specification roll of steel plates) for cold-rolling mill.
对冷轧板表面清洁度的影响因素进行了综述,并重点探讨了退火黑斑和边缘碳的组成和成因。
The influence factors of the surface cleanliness of cold-rolled sheet are introduced and the reasons and composition of the post-annealing black stain and edge carbon are mainly analyzed.
通过拉伸、宏观织构、FLD等实验,测试并比较了SPCD和SPCE冷轧板的成形性能。
The forming properties of SPCD and SPCE cold-rolled sheet are tested and compared through experiments such as drawing, macrostructure and FLD.
金属产品价格出现年度新低,热轧板和冷轧板价格下降3%至6%,建筑用钢材价格略有回落。
Wired products saw new low YTD . HRC and CRC prices down 3-6%, construction-used steel prices down slightly.
在相同的镁含量的情况下,热轧板的冲击韧性明显高于冷轧板,而抗拉强度和屈服强度显著下降。
In the same case of magnesium content the impact toughness of hot-rolled plates were higher than cold-rolled, while the cold-rolled plates had good tensile and yield strength.
为了提高板形质量,预防板带失稳,需求解冷轧板带在轧制过程中所产生的残余应力的分布规律。
In order to improve the quality of strip shape and prevent strip from lossing stability, the distributing rule of residual stress which produced during the process of rolling needs to be solved.
冷轧板,镀锌板,热轧板,铁矿石,酸洗板,加工,钢铁企业,外表处置,钢管,每吨5600元。
Cold-rolled plate, galvanized sheet, hot-rolled plate, iron ore, pickling board, processing, steel, surface treatment, Pipe, 5600 yuan per ton.
尤其是热轧带钢,它不仅作为薄板和中板可以直接使用,而且还作为冷轧板、焊管和冷弯型钢的原材料。
It can not only be used as slab and sheet, but also as raw and processed materials of cold rolling, weld tube, and cold banding beam.
可用于低碳钢、低合金钢、碳素结构钢、不锈钢及各种有色金属板带材的轧制冷轧板带和热轧板带生产。
The utility model can be used for the production of cold rolled sheets and hot rolled sheets of low-alloy steel, carbon constructional steel, stainless steel and various non-ferrous metal plates.
应用推荐