这又将制冷剂变回原先的较冷的液态,从而可以再利用。
This turns the refrigerant back into its cooler liquid state to be used again.
这一情况中,较热物体是气态制冷剂,较冷物体包括冷凝器的那些散热片。
In this case the hotter body is the refrigerant gas and the cooler body comprises the fins of the condenser.
制冷剂气体水合物及多元水合盐等是重要的蓄冷介质,可应用于空调、冰箱等蓄冷系统。
Gas hydrate and multicomponent salt hydrate etc. are very important cool storage media for air-conditioning and refrigerator, and so on.
冷凝器:在发生器中产生的冷剂蒸汽,被冷凝器传管内流动的冷却水冷却,冷凝后变成冷剂液体。
Condenser: vapor of the refrigerant from the generator is cooled down by the cooling water running in the heat transfer tubes of the condenser thus becoming condensate after condensation.
介绍了以水泥为稳定剂的现场冷再生技术的特点、施工工艺及常见问题。
The characteristics, construction techniques and common problems of cold in - place recycling technology with cement as a stabilizer are introduced.
PBT作为PET结晶促进剂,降低回收PET的冷结晶温度,提高热结晶温度。
As accelerator for PET, PBT could decrease the cooling crystallization temperature and increase the melt crystallization temperature of recycled PET.
本文介绍了美国3M公司及柯达公司最新推出的两类调色剂,可将黑白影像胶片的色调由暖调有效地调为冷调。
This paper introduces two types of new photogrphic toning agents recently disclosed by 3M and Kodak, used for transforming warm tone of b /w film into cold tone.
论述了冷芯盒制芯的优点及降低粘结剂用量的基本途径。
This paper describes the advantage of coremaking with cold core boxes and the basic approach to reduce the volume of bonding agent in coremaking.
不论原油加降凝剂与否,经历动冷后原油的屈服值远小于静冷的原油。
Whether the crude is treated by flow improver or not, yield value of dynamically cooled crude is much lower than that after static cooling.
采用冷芯盒法制芯时,粘结剂中的溶剂含量对砂芯强度有较大影响。
In core making with cold core box, the solvent content in the binding material has a greater influence on the sand core strength.
讨论了细化晶粒的几种方法:退火、添加晶粒细化剂和激冷。
Several methods for refining grains including annealing, adding grain refiner and quenching were discussed.
对冷等离子体制备催化剂的机理进行探讨。
Probe into the mechanism of preparing catalyst by cold plasma technology.
用途:宇航工业,化工耐腐材料,热喷涂,冷烟花,铝合金添加剂,电真空材料。
Uses: aerospace industry, chemical corrosion-resistant materials, thermal spraying, cold fireworks, aluminum alloy additives, electric vacuum material.
对无烟煤配入瘦煤和焦粉,用改性焦油洗油残渣做黏结剂,制备冷压型焦进行了试验研究。
An experiment and research on cold briquetting coke was conducted with anthracite coal blended with lean coal and fine coking coal and with residuum of modified coal tar oil as the binder.
比较了冷应激后胃对SP和SP受体拮抗剂的动力学反应性的变化。
We also identified the change in gastrokinetic reaction to SP and SP receptor antagonist after cold stress.
冷固结球团直接还原工艺成功的关键因素之一是成型粘结剂的选用。
One key factor of direct reduction of cold bond pellets is the choice of shaped binder.
本文在国内外已有研究成果的基础上,根据国内普遍采用半刚性基层沥青路面这一结构特点,研究利用水泥为稳定剂的旧沥青路面的现场冷再生技术。
Based on the research results from home and abroad, and the characteristic of the widely-adopted semi-rigid pavement, the thesis studies the cold in-place recycling technology stabilized by cement.
实验方法为:在柴油油样中加入T9866降凝剂,然后测定油样凝点和冷滤点。
The experimental procedures are: adding pour point depressant T9866 in a diesel sample and measuring the solidifying point and cold filter plugging point of the oil sample.
冷模实验表明:多级错流短接触汽提方法能将汽提介质与催化剂的接触时间控制在两级挡板之内。
The cold model experimental results indicated that the MCSS degassing tower keeps the contact between catalyst and steam within two stages.
采用旧沥青路面铣刨混合料,用泡沫沥青和水泥复合作再生稳定剂进行现场冷再生碾压成型形成半柔性基层。
Using old asphalt pavement milling mixture, foamed bitumen and cement are combined to make recycling stabilizer, to generate the semi-flexible base by site cold recycling.
本文主要对以二灰为添加剂的旧沥青路面冷再生基层(底基层)技术进行了研究。
This paper primary studies the technology of lime flyash-stabilized cold reclaimed asphalt pavement mixture for bases and subbases.
发现不同的粘结剂及其不同的用量对冷压成型会有不同的结果。
As a result, the different binder kinds and addition levels led to different conclusions.
一种金属线连续铸造方法及装置。向金属线连续铸造装置的急冷旋转圆盘上喷注金属熔体形成金属线,连铸前涂擦阻流剂。
Molten metal, especially brittle metal and alloy, is sprayed to a quickly-cooling rotary drum of metal wire continuous casting equipment, which is coated with antiflow agent, to form metal wire.
发动机在冷起动阶段由于空气温度低、燃油雾化不好、催化剂未能达到起燃温度,因而hc和CO污染严重。
In the cold starting phase, because of the lower air temperature, the worse fuel atomization, and the catalyst temperature being below initiation temperature, HC and co emissions are high.
实践证明,第三代磷化剂是目前使用性能最好的一种冷拔钢管磷化剂。
It is proved that the third one is the best for cold-drawn steel tubes at present.
加入低温流动性能改进剂生产的低凝柴油,在储存和使用过程中存在凝点、冷滤点反弹回升现象,因此对辽河原油的常压柴油、加氢裂化柴油进行了加剂研究。
It is known that setting point and cold filter plugging point of low pour point diesel with cold flow promoter can reverse during the storage and use process.
加入低温流动性能改进剂生产的低凝柴油,在储存和使用过程中存在凝点、冷滤点反弹回升现象,因此对辽河原油的常压柴油、加氢裂化柴油进行了加剂研究。
It is known that setting point and cold filter plugging point of low pour point diesel with cold flow promoter can reverse during the storage and use process.
应用推荐