研究了光强、引发剂浓度及引发剂种类对其光聚合的影响。
The influences of light intensity, initiator concentration and different initiators on the kinetics were investigated in this paper.
同时初步设计出了用于研究光引发剂分解和光聚合的实验仪器。
At the same time, the paper designed the experimental apparatus which are used in researching on photolysis and photopolymerization.
范·奥斯坦称那些化学物质为“防晒霜”，用来防止更严重的光损伤，并帮助重建受损的聚合物纤维。
Van Oosten calls those chemicals "sunscreens" because their goal was to prevent further light damage and rebuild worn polymer fibers.
这束光使人工晶体上的光敏物质聚合，并改变形状，这意味着眼科学家能够调节这些晶状体来改变它的功效。
This causes it to polymerise and then change shape, which means the ophthalmologist can tweak the lens to alter its power.
一个显示有F-4鬼怪式战斗机的可刷新全息图，这个全息图像建立在一种光致折变的聚合物上，不需要佩戴3D眼镜就能够看到。
A refreshable holographic image of an F-4 Phantom Jet created on a photorefractive polymer that can be viewed without 3D glasses
聚合一起的提升会更加的增加你们的速度，在由爱与光的照耀下带来的巨大转变中，生活会变成喜悦和开心。
Together you will advance much quicker than you would otherwise have done, and life will become a joy and pleasure as Love and Light bring about great changes.
而冷冻干燥的疫苗则在置入微针模子前与乙烯基吡咯烷酮单体混合、并在室温下用紫外光将混合物聚合。
Freeze-dried vaccine was mixed with the vinyl-pyrrolidone monomer before being placed into microneedle molds and polymerized at room temperature using ultraviolet light.
聚合物基复合材料把无机物的高模量、尺寸稳定性以及光、电等特性与高分子材料的韧性、易加工性、电绝缘性巧妙地结合起来。
Polymer based composites combined the good process property, electrical insulation and toughness of polymer with the properties of inorganic materials, such as high module, good dimension stability.
光引发聚合作为区别于热引发聚合的一种合成手段，具有许多优越性和实用性。
Photopolymerization has many advantages and applications as one kind of synthesis technology which differs from therm polymerization.
本工作是研究掺C_（60）有机聚合物热光特性对不定位干涉的作用。
Nonlocalized interference influenced by thermo-optic effect of C60 dopedpolymer film is invested in this paper.
杂化光聚合体系是一种可以改善这些不足的方法，它可以分为混合杂化体系和杂化单体体系两种。
Hybrid photopolymerization technique could be considered as a hopeful solution to overcome the drawbacks of pure systems, which contained two different systems, mixture hybrid and hybrid monomer.
通过调节胆甾相液晶的螺矩、聚合物的浓度和聚合反应条件，我们能使PSCT光阀性能最优化。
We optimized the performance of the PSCT valve by adjusting the cholesteric pitch, the polymer concentration and polymerization condition.
研究了偶氮苯聚合物的光致各向异性光栅与表面光栅。
Optically induced anisotropy gratings and surface gratings on azobenzene polymer films are studied.
本文实验研究了偶氮侧链聚合物液晶薄膜(P -CN)的光致双折射和光存储性质。
Optical storage based on photoinduced birefringence in azobenzene side-chain polymer liquid crystal (P-CN) film is reported.
结果表明，聚合度越高，树脂的热稳定性越好，HPVC的耐光老化性能明显优于普通聚合度聚氯乙烯(pvc)。
The results show that the higher the degree of polymerization is, the better heat stability of HPVC resin is, and the better light aging resistance of HPVC is.
通过紫外光引发甲基丙烯酸甲酯的接枝聚合，在聚丙烯膜表面引入了反应性基团酯基。
The surface of polypropylene microporous membranes was activated by the graft polymerization of methyl methacrylate initiated with ultraviolet-photo.
采用紫外光引发原位聚合的方法制备了具有支撑膜的邻香草醛分子印迹聚合物膜。
Using o-vanillin as template molecule, molecularly imprinted polymer membranes with sup- porting membrane were synthesized through in-situ polymerization by UV irradiation.
对于光引发聚合的原理及硫自由基的稳定性对聚合反应的影响也进行了讨论。
The mechanism of photo-induced polymerization and the effect of the stability of sulfur radical on block copolymerization are also discussed.
以动态光散射（DLS）、透射电子显微镜（TEM）和场发式扫描电子显微镜（FESEM）等对各阶段乳液聚合的胶粒大小和分布以及形态结构进行了表征。
The sizes and their distributions as well as morphologies of polymer microspheres at various emulsion polymerization steps were characterized by means of DLS, TEM and FESEM.
导电聚合物的发现提供了新的制造廉价光伏电池的材料，使其研究开发低成本光伏电池成为可能。
The discovery of electric conducting polymers supplies new materials and makes it possible to research and develop photovoltaic cells of low cost.
本论文研究了聚合物／无机材料复合体系的光伏特性。
The photovoltaic properties of polymer/inorganic hybrid systems have been investigated.
适当地增加液态辅助单体含量及其所含双键官能团的数目，会明显增加光聚合速度。
Adding properly value of liquid monomer and the number of polymerized functional groups, the rate of polymerization was greatly increased.
研究了所制备的聚合物的全光开关效应。
Furthermore, the all-optical switching effect of the polymer was investigated experimentally.
许多文献报道证实，庞大的侧基或具有形成氢键能力的基团有利于聚合物主链形成稳定的螺旋构象，从而赋予材料高度的旋光活性和某些特殊功能。
In general, bulky side-chain and hydrogen bonding are in favor of the formation of stable helical conformation for polymers, which endows them with high optical property and some special performance.
研究了两种探针化合物在安息香醚引发烯类单体光聚合反应中的应用。
The photopolymerization process of acrylate monomer initiated by benzoin ether has been studied by two kinds of fluorescence probe.
简单介绍了消光机理、消光剂的定义及分类，并对无机消光剂和聚合物消光剂进行了比较。
Flatting mechanism, definition and classification of flatting agent were introduced briefly. The paper made an comparison between inorganic and polymeric flatting agent.
从电镜照片，X光衍射图谱和DSC图谱上表明了稀土化学灌浆材料有聚合物的结晶和二次固化峰的存在。
It was indicated there were polymer crystalline and two solidifying peaks in the rare-earth chemical grouting materials by the electronic microscope photograph, X-ray diffraction analysis and DSC.
用数值方法研究了在具有光致异构非线性的聚合物中光学空间孤子的垂直全光调控。
In the photoisomerized polymer, the perpendicular and all-optical control of optical spatial soliton is simulated by numerical method.
有机钌络合物和有机钌聚合物具有特殊的光、电性能，是一种新型功能材料，正在形成一个新的研究领域。
As a new functional material with special optical and electronic properties, ruthenium complexes are developing into an interesting research field.
有机钌络合物和有机钌聚合物具有特殊的光、电性能，是一种新型功能材料，正在形成一个新的研究领域。
As a new functional material with special optical and electronic properties, ruthenium complexes are developing into an interesting research field.
应用推荐