主要研究层绞式带状光缆和边粘型大芯数光纤带。
In this article, we mainly research stranding fiber ribbon cable and side cladding multifiber ribbon.
本文将介绍光纤带叠带式光缆的生产工艺及其技术。
This article will introduce the production technology of fiber ribbon optical cable.
本文介绍了骨架式光纤带光缆的阻水机理和阻水性能。
This paper describes the water blocking mechanism and performance of slotted core fiber ribbon cable.
超薄型光纤带被成功地运用于108芯松管层绞光缆中。
The ultra-thin ribbon has been successfully used in a 108-fiber loose tube cable.
束管式光缆制造中最关键的工序是光纤和光纤带的二次套塑。
The key process in manufacturing loose tube type fiber optic cable is secondary coating for fiber or fiber ribbon.
在本文中，我们将介绍超薄型光纤带及108芯松管层绞光纤带光缆的结构和性能。
In this paper, the structure and characteristics of ultra-thin optical fiber ribbon and 108-fiber loose tube ribbon-based cable are presented.
本文介绍了光纤并带树脂的国内外研究现状，详细阐述了光纤带结构及紫外光固化光纤并带树脂的性能参数。
In this paper, the development of optical fiber ribbon in the world, the structure of the optical fiber ribbon and the parameters of UV curing matrix material are introduced.
用这种光纤制造的骨架式光纤带光缆具有优良的光学性能、机械性能、环境性能和接续性能，特别适合于在城市中的WDM系统中应用。
Slotted core ribbon cables with this type NZ-DSF have good optical, mechanical, environmental, and jointing performances, especially suitable for use in metropolitan WDM systems.
平台下，安设有智能化基础结构，包括带传感器的供水管道及一张光纤网络。
Below the platform sits the smart infrastructure, including water pipes with sensors and a fibre-optic network.
多粒度交换技术利用波带级路由以及光纤级路由，可有效降低光交叉连接器的复杂度。
Multi-granularity switch technologies decrease the complexity of optical cross connects by employing waveband routing and fiber routing techniques.
对扭转椭圆双折射光纤环形腔的带阻输出特性进行了分析和计算。
The band stop output characteristics of the spun elliptical birefringent fiber optic ring resonator are analysed and calculated.
从理论上导出了考虑耦合损耗引起的附加相移后光纤环形腔的带阻输出特性。
The output band stop characteristics of the fiber optic ring resonator(FORR) are theoretically derived in consideration of additional phaseshift induced by loss of the couper.
传输谱和弯曲特性测试表明布拉格光纤样品具有两个明显的传输波段，体现了带隙导光的特征。
The measurements of the fiber sample demonstrate its bandgap-guided properties, showing two obvious bandgap guided transmission bands.
研究了基于可调谐滤波器(TOF)的带中心波长自动跟踪光纤光栅动态波长解调技术。
A fiber Bragg Grating dynamic interrogation technique based on the tunable optical filter (TOF) was investigated.
作者研制成一种带光纤的电力变压器局放超声pzt传感器。
In this paper the ultrasonic PZT ceramic sensors for monitoring local discharge in power transformer with optic fiber have bean developed.
该激光器由带单模尾纤输出的半导体激光器、光纤偏振控制器、PLZT电光陶瓷偏转器和输出凹面镜等组成。
The laser consists of a semiconductor laser with single mode fiber coupled output, polarization controller, PLZT electro-optic ceramic deflector, and output concave mirror.
在这一背景下，人们提出多粒度交换的概念，即能够同时提供波长、波带以及光纤等多种粒度的交换。
Under such circumstances, the concept of Multi-Granularity Switching appeared. It can provide the switch of wavelength, waveband and multi waveband granularity optical fiber simultaneously.
光子晶体光纤(PCF)是一种具有特殊包层结构的光纤，它是利用光子禁带效应(PBG)来导光的。
The photonic crystal fiber (PCF) with a special envelop structure induces the light by photonic bandgap (PBG) effect.
采用经钨带灯标准光源标定的多道石英光纤光学系统，测量了HL-1装置等离子体可见光波段轫致辐射功率的径向分布。
Using a multichannel quartz optical-fiber system calibrated with a standard tungsten strip lamp, the radial profiles of the visible bremsstrahlung radiation power in the HL-1 tokamak were measured.
提出了一种新型多粒度光交叉连接（MG-OXC）的体系结构，它可以完成光纤、波带、波长的交换，以及不同粒度业务的上下话路。
A kind of novel multi-granularity OXC architecture is proposed, which can be used to fiber switching, waveband switching and wavelength switching.
通过对注入波类型的比较，可以得出结论，TE类型的波更易于限制在本文所设计的这种结构的带隙型光子晶体光纤中进行传播。
By comparison of injection wave type, it can be concluded that te type wave is easier to be limited to transmit in the structure of the band gap photonic crystal fiber which designed in this article.
设备设有光纤计数功能，可设定编带数量。
The equipment is set with fiber counting function for setting the quantity of braiding.
介绍了一种基于边缘滤波器，可带中心波长自动跟踪，主要应用于海底水声信号的检测的光纤光栅波长解调器。
An automatic tracing centric wavelength demodulation system based on the edge filter which can measure the wavelength of the narrow-band back-reflected spectrum FBG is described.
多模光纤存在严重的模式色散，其带宽距离积受限。为此，分析了多模光纤的带通特性。
Becouse multimode fiber has high modal dispersion which limits to its bandwidth distance product, the band pass characteristics of the multimode fiber was analyzed.
所述波导采用的形式最好是具有包含光子带隙结构的包层而 该结构又包住传导光的空芯部分的光纤。
The waveguide is preferably in the form of an optical fiber having a cladding that contains a photonic band gap structure which in turn envelopes a light conducting, hollow core portion.
利用啁啾光纤光栅，对带啁啾的超高斯脉冲的色散补偿特性进行了理论分析和数值模拟。
By using the chirped fiber grating, theoretically study and numerical simulation have been made on the compensating dispersion property of chirped super Gaussian pulses transmitting in the fiber.
结合课题组研制的带隙型光子晶体光纤，分析了间隙孔对其特性的影响，并计算存在带隙的波长范围。
Making use of the fabricated bandgap-type photonic crystal fiber, the influence of the interstitial holes on the photonic bandgap is analyzed and the spectrum range of photonic bandgap is calculated.
这种光纤相位延迟器具有连续可调和直读特性，同时具有宽波带特点。
This device, characterised by broad band, can be adjusted continuously and read directly.
光子带隙型光子晶体光纤依靠的是一种全新的导光机制，它是光子晶体光纤周期性介质结构所特有的。
Photonic band gap PCFs are of a new guidance mechanism, which is unique to the PBG-PCFs 'periodic construction medium.
本实用新型的特征是由形状记忆合金弯管、光纤光栅、带槽铜片以及铜基片构成。
The utility model has characteristics in that the sensor includes a shape memory alloy elbow, the fiber grating, a copper plate with groove and a copper base plate.
应用推荐