我们编制了用于肋壳结构分析的有限元程序。
A finite element program designed for the stress analysis of ribbed shells is presented.
剩下的计算是就是在片元程序中逐像素计算修正。
The remainder of the computation is performed on a per-pixel basis in a fragment program.
采用ANSYS有限元程序分析起重臂的局部屈曲。
Partial buckling of hoist boom is analyzed with ANSYS finite element program.
对矩形波导的计算验证了我们的有限元程序是有效的。
Numerical calculations for the rectangular waveguide verify the validity of our FEM program.
用有限元程序成功地分析了导电混凝土除冰化雪系统。
The finite element method is introduced to analyze deicing or snow melting system successfully.
主要研究了乘法分解弹塑性在大变形有限元程序中的实现。
This paper discusses the realization of multiplicative decomposition elastoplasticity in anamorphosis finite element equation.
以工程实践和动力有限元程序分析沟槽深孔微差爆破问题。
The engineering practice and the numerical simulation have been conducted on the millisecond blasting for ditching deep bore hole.
说到底,图形化元程序依然是程序,因此需要由程序员来正确地实现它们。
Ultimately, graphical metaprograms are still programs, thus they require a programmer to implement them correctly.
完善地震加速度时程曲线与反应谱曲线之间转换的有限元程序。
Complete the finite element procedure of conversion between epoch curve and reaction curve of earthquake acceleration.
此方法有十分广泛的用途,并易于在位移法有限元程序中实现。
The method has a very wide field of application, and is easily implemented in displacement-based finite element program.
然后采用通用的有限元程序ANSYS模拟模型得到其数值解。
To get numerical results, the general finite element program-ANSYS was employed to simulate model.
利用大型有限元程序进行结构弹塑性时程反应分析,是可行有效的。
It is feasible and effective to use fea for the elastic-plastic time-history analysis of structure.
以此为基础开发的有限元程序具有很好的稳定性、可修改性和可重用性。
The FEA program developed based on this framework has good stability, modifiability and reusability.
在列出相应的准则公式后,采用有限元程序ANSYS将系统进行优化。
After the formulation of appropriate criteria takes place the optimization of the system with the Finite Element Software ANSYS.
所研制的用于岩土工程问题的弹—粘塑性有限元程序,可供实际工程使用。
The FEM program given for solving elastoviscoplastic problems in rock engineering can be applied to practical projects.
应用BSNFEM非线性有限元程序对偏心支撑钢框架进行了循环加载分析。
This paper applies nonlinear finite element program BSNFEM to analyze the behaviors of eccentrically braced steel frames under cyclic load.
基于渗流有限元理论和虚单元固定网格法,编制了堤内压盖渗流有限元程序。
A seepage finite element program was developed based on seepage FEM and imaginary elements fixed mesh method.
SJMEPLA是专门开发的执行玻璃结构的静态和动态计算的有限元程序。
SJ MEPLA is a finite element program specially developed to perform static and dynamic calculations of glass structures.
提出一种通用有限元程序和数学软件相结合的大跨度桥梁有限元模型修正方法。
A modification method based on the combined universal finite element program and mathematic software for finite element model of long span bridge is proposed.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
针对邦元软件开发困难的现状,本文提出采用软件框架指导和辅助邦元程序开发。
In order to overcome the inconvenience of federate software development, we adopted software framework technology to guide and assist federate development in this paper.
使用顶点和片元程序能够取代计算机图形硬件上使用的传统的顶点投影和光照公式。
Using vertex and fragment programs, it is possible to replace the traditional vertex projection and lighting equation used by real-time computer graphics hardware.
以某下承式刚性吊杆系杆拱桥为实例,利用空间有限元程序对其空间稳定性进行分析。
Taking a through bridge with rigid suspender and tie-arch for example, the space stability is analyzed by means of finite element program.
当前典型的有限元程序大都以结构化编程思想为基础,由成千上万行过程化代码构成。
Typical finite element programs, which were designed basing on the idea of procedural programming, consist of thousands of lines of procedural codes.
ANSYS软件具有建模简单、快速、方便的特点,因而成为大型通用有限元程序的代表。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representation of large universal finite element procedure.
ANSYS软件具有建模简单、快速、方便的特点,因而成为大型通用有限元程序的代表。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representative of large universal finite element procedure.
运用自编边界元程序计算了闸门扰动时动水压力的分布,进而推导了附加质量阵的简化求法。
The hydrodynamic pressure due to the coupled vibration is studied with Boundary Element Method, and the simplified formula for the attached mass matrix is derived.
采用特殊土单元法考虑水流冲刷作用,避免了传统有限元程序计算中一些复杂、繁琐的工作。
The special soil element method, which avoids some complex work in traditional methods, is supported in this paper to consider the action of current scour.
应用连续体振动理论和SAP5结构分析有限元程序,分析了液化石油气充瓶站管线振动问题。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用连续体振动理论和SAP5结构分析有限元程序,分析了液化石油气充瓶站管线振动问题。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用推荐