竹地板通常分为平压结构和侧压结构。
Bamboo floors are generally offered in both vertical and horizontal graining construction.
双面涂塑钢带挡潮，并具有抗侧压作用。
二次侧压增大，渗透通量和分离因子减小。
The permeation rate and separation factor decrease while increasing downstream pressure.
钢丝铠装抗侧压性能优良，并具有防弹能力。
Wire-side pressure Armored excellent performance, and a bullet-proof capability.
双护套结构挡潮，提高了光缆抗侧压、抗冲击性能。
Double tidal sheath structure, improve the cable-side pressure, impact resistance.
在论文的最后进行了有侧压拉弯成形模拟的分析与探讨。
At last, the author analyzes and studies numerical simulation of stretch bending forming with lateral compression.
为了比较，还对恒侧压，增加轴向荷载的方式进行了平行试验。
In order to be compared, the experiment using general loading patterns, namely, increasing axial loading under constant confined pressure, was performed.
模拟结果对板坯侧压规程的制定和设备维护有重要的工程意义。
The simulation results have important the meaning of engineering for siding press regulation and maintenance of equipment.
在SP侧压轧制理论的基础上，建立了SP调宽轧制的工作模型。
Basing upon the rationale of SP, working model was build up at last.
砂岩的刚度和强度均随侧压的增大而增大 ，具有明显的压硬性。
The stiffness and strength of sandstone increase with increasing of its confining pressures presenting obvious compressive hardening.
分析结果为板坯侧压规程的制定和轧制力的在线预报提供了理论依据。
The analysis results supply a theoretic foundation and reference for forecasting rolling force online and working out the regulations of slab siding press.
不同岩性岩石的应变软化性态和破坏机制也均随侧压的增大而发生转化。
Behavior of the strain softening and failure mechanism on different rocks transforms with the increase of confining pressure.
竹皮的有碳化、本色以及斑马三大类颜色，平压，侧压两种纹路可以选择。
Bamboo leather have carbide, ecru and zebras three kinds of color, flat crush, lateral pressure two lines can choose.
通过分析调宽机模块的运动特性，可获得板坯侧压的位移和速度边界条件。
The boundary condition of velocity and displacement was gained during slab side press, through analyzing sp die kinematics character.
主要从事新型无侧压无连杆内摆线行星齿轮内燃机的研制开发和经济管理软件的开发。
Mainly engaged in a new type of lateral pressure without cycloidal gear linkage within the internal combustion engine research and development of economic management and software development.
通过对巷道变形破坏的机理分析，提出了通过控制巷道实际高度，从而控制侧压的观点。
By the analysis of the mechanism of deformation and failure of the adit, this paper presents a view which based on the control of the real high of adit, side-pressure is controlled.
本文在分析地应力的地质成因的基础上，还提出用岩体地应力的侧压比值K作为评价的准则。
On the base of studying the geological origin, a lateral stress ratio K is also propsed in this paper as a criterion for evaluating the stability of these two zones.
本文进行了混凝土分别在单、双向侧压作用下受拉变幅疲劳试验，得到了疲劳寿命和残余应变。
Variable-amplitude fatigue tests for concrete in tension under single and bi-lateral pressures are conducted. Consequently, the fatigue life and residual strain are obtained.
移动唇口板以减小内收缩比可以实现侧压式进气道自起动，主要是因为侧板分离包被排出进气道。
Moving cowl, decreasing interior contraction ratio also can realize the hypersonic sidewall compression inlet's self-starting because of separation bubble on sidewall spilling out.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
计算得到了额定工况下标准燃料组件内各个冷却剂通道的流量分布和不等间隙通道燃料板两侧压差。
The flow distribution and pressure difference of different coolant channels in the standard fuel assembly at rated operating condition are reached.
其次，比较了凸弯边高压橡皮成形模不同参数的选取对成形的影响，并总结出侧压块的一些设计规律。
Secondly, compared the effects of different parameters of flange bending hydraulic rubber forming model on hydraulic rubber forming, and draw some conclusions of designing the side blank holder.
进一步研究了在结霜过程中空气冷却器的传热面积、传热系数以及空气侧压降与霜层生长的变化关系。
Through expounding the calculation process of the external wall, roofing, floor and door and window heat transmission coefficient, the article investigates the energy-savingc alculation.
进一步研究了在结霜过程中空气冷却器的传热面积、传热系数以及空气侧压降与霜层生长的变化关系。
Theoretical analysis using the method of energy equilibrium in covering layer and validation of the overall heat transfer coefficient of greenhouse covering materials;
整流罩位置为25%的三维侧压进气道可以获得较高质量捕获和总压恢复系数，且隔离段出口流场比较均匀。
And three-dimensional sidewall compression inlet with 25 percent cowl position has high mass capture and total pressure recovery coefficient and isolator exit flow flied is homogeneous.
得出表征立轧时轧件断面特征的四个参量与侧压量、立辊直径、板坯来料厚度及宽度间的关系，并建立了新的数学模型。
T he relation of the four parameters with initial slab thickness, initial slab width, width reduction and edger roll diameter was obtained and a new mathematical model was accomplished as well.
分析蜂窝结构在纵横方向上的差异性和面板原材料钎焊后的力学性能对钎焊铝蜂窝板纵向和横向侧压变形过程及破坏形式的影响。
Analyze the effect of the longitudinal and transverse structure difference of honeycomb on the longitudinal and transverse deformation process and destroy type of BAHP.
在轴对称的实验装置上，对上下施加侧压的中心开孔的含瓦斯煤饼，将孔内压力突然降至大气压，求得煤样在侧压和瓦斯压力联合作用下的临界破坏条件。
The pressure was then suddenly released in order to find out the critical condition of failure under the combined effect of confining pressure and pore pressure.
同时研究了板坯SP侧压后尾部翘曲的形成原因及影响因素。研究结果表明，板坯侧压调宽后，头部和尾部在长度方向上形成鱼尾，厚度方向上形成狗骨；
The results show that the head and end of the slab formed fish tail along length direction and dog bone along width direction after SP.
同时研究了板坯SP侧压后尾部翘曲的形成原因及影响因素。研究结果表明，板坯侧压调宽后，头部和尾部在长度方向上形成鱼尾，厚度方向上形成狗骨；
The results show that the head and end of the slab formed fish tail along length direction and dog bone along width direction after SP.
应用推荐