也可以考虑购买伺服电动机。
可适配全球任何一台伺服电动机。
步进电动机是一种脉冲控制的伺服电动机。
Stepping motor is a kind of motors that are controlled by pulse.
它可以由二相微型步进电机或无刷伺服电动机来驱动。
Can be driven either by two phase micro-stepped motor or brushless servo motors.
本文讨论了模糊控制的原理以及交流伺服电动机的控制结构。
In this paper the elements of fuzzy control and architecture of servo alternating motor are discussed.
介绍分数槽绕组在正弦波交流永磁伺服电动机中的应用及实例。
This paper introduces the application of the fractional slot winding in the ac sine wave PM servo motors as well as its prototype.
采用永磁同步伺服电动机,构成多管火箭炮交流位置伺服系统。
The permanent magnetism synchronous servomotor was adopted to construct the AC position servo system of multiple launch rockets.
本文设计的控制系统是一套较为理想的直流伺服电动机控制系统。
It proves that the controlling system designed by this paper is a more perfect system using in the DC servo motor controlling field.
为了提高伺服电动机系统的运行性能,设计了伺服电动机系统参数整定平台。
In order to improve the stability of servo motor system, the control parameters adjusting system for servo motor was designed.
详细研究了一种新型无需外配位置传感器、少槽交流伺服电动机的原理和设计特点。
The principle and design characteristic of a kind of new type ac servo motor which is no need for the external position sensor and has the feature of few slots are studied detailedly.
伺服电动机作为汽车自动空调的重要执行元件,已成为汽车自动空调中必不或缺的部件。
As a vital actuator in automatic air conditioner of vehicles, servo motor has become an indispensable part.
本文采用有限元法对带铁氧体屏蔽罩的稀土永磁低惯量直流伺服电动机的磁场进行了计算。
The magnetic field of a low-inertia REPM DC servo motor with ferrite shielding case was calculated by the finite element method.
从帕克前parvex系列ssd是一个大气压范围内永久磁铁使用有害伺服电动机设计。
Ex series from Parker SSD Parvex is a range of permanent magnet servomotors designed for use in hazardous atmospheres.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
直流伺服电动机通常作为原动力在 计算机、数控机械、或其他应用程序启动和停止是快速、准确。
DC servo motors are normally used as prime movers in puters, numerically controlled machinery, or other applications where starts and stops are made quickly and accuray.
设计的凸轮控制器可实现对AC伺服电动机进行分段变速控制以及凸轮一周中的两通两断的控制功能。
The cam controller allows the AC servo motor to run at different speed for different angles, and to turn on and turn off twi.
送料动力:采用交流同步伺服电动机,具有响应快,定位精度高,低噪音,制动热埙小,寿命长等特点。
Feed Power: uses the AC servomotor, fast in response, high in precision, low in noise, low in braking heat loss but long in service life.
基于通量浓度控制技术和范围由DIGIVEX车道,在高压同步伺服电动机是专为常规机主轴摩托的。
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.
伺服电动机更容易控制,但是他们的功率都比较小,需要明确的电压,andarelessintuitive。
Servos are much easier to control, but they generally are less energy efficient, have explicit voltage requirements, and are less intuitive.
焊件移动或变位机构,如焊接滚轮架,头尾架翻转机,回转平台和变位机等,精密型的移动变位机构应配伺服电动机驱动。
3 mobile or welding positioner, such as welding roller frame, frame head and tail flip machine, rotary platform and positioner, mobile precision displacement mechanism should drive with servo motor.
在PC 104总线控制下,应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。
The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.
介绍了稀土永磁空心杯转子直流伺服电动机的结构特点,空心杯电枢的绕制方法及其制造工艺,同时还介绍了这种电机的主要用途及其优点。
This paper introduces mainly the construction features of REPM DC servomotors with air-core rotors and their manufacturing technology. Meanwhile, it states their application feild.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点,在许多精密伺服控制系统中得到广泛应用。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
系列单相高精度全自动交流稳压器,由接触式自耦调压伺服式电动机、自动控制电路等组成。
SVC(TND)SERIES single phase high precision full automatic ac voltage regulator composable of contact auto voltage regulator, servo motor automatic control circuit etc.
混合式步进电动机伺服系统转子的位置检测,可以用传统的外配位置传感器或基于理论算法的无位置传感器方案,但是存在许多问题。
Position detection of rotor in hybrid stepping motor servo system can use traditional outside position sensor or sensorless scheme based on theoretical algorism, but there are many problems produced.
为满足超高速加工的要求,近年来出现了一种新型的直线电动机伺服驱动进给方式。
A new servo feed mode driven by linear motor comes out in recent years in order to meet the requirement of high speed machining.
为满足超高速加工的要求,近年来出现了一种新型的直线电动机伺服驱动进给方式。
A new servo feed mode driven by linear motor comes out in recent years in order to meet the requirement of high speed machining.
应用推荐