演示子板包含温度和光传感器、一个三轴加速计、8 个三色 LED以及两个按钮开关。
The demonstration daughterboard contains temperature and light sensors, a three-axis accelerometer, eight tricolour LEDs, and two pushbutton switches.
外壳可同时终了轴和通轴固定件和加工的普遍容纳所有传感器模块，无论所需的脉冲计数。
The enclosure accommodates both end-of-shaft and thru-shaft mountings and is universally machined to accommodate all sensor modules, regardless of the desired pulse count.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
在手机设备移动时，内置加速度传感器报告在三维空间，沿着三个主要轴上的线性加速度改变。
As the mobile device moves, a built-in accelerometer reports linear acceleration changes along the three primary axes in three-dimensional space.
最广泛应用的单轴感应式信号传感器是微动同步器。
The most widely used single - axis inductive pickoff is the microsyn.
一般来说，在电动机调速控制系统中需要在转子轴上安装机械传感器，测量电动机的速度和位置。
Generally speaking, in the PMSM (Permanent-magnet synchronous motors) control system, mechanical sensor on the rotor shaft is required to detect the position and speed of the rotor.
最广泛应用的单轴感应式信号传感器是微动同步器。
The most widely used single-axis inductive pickoff is the microsyn .
提出了一种基于支持向量回归机(SVR)的三轴磁通门传感器误差修正方法。
An error correction method for three axial fluxgate sensor based on support vector regression (SVR) is proposed.
ST420是一款模拟输出轴转速传感器。
在前方，还可以看到一个计轴传感器。
In the front you can see a sensor of the wheel-counting device.
方位部分采用转台式结构，俯仰部分把光电传感器与转动轴合二为一。
The part of the azimuth adopts a revolving pedestal, the part of the pitching combines a photoelectric sensor and the axis of rotation.
本文介绍了由电涡流传感器和MCS-51单片机组成的大轴弯曲量监视仪的原理和设计要点。
The principle and key design points of an instrument composed of an eddy-current transducer and an MCS-51 microprocessor for monitoring bow of heavy shaft are introduced in this paper.
3d的例子印刷短距离和长距离的天线，电子和光学传感器，通过灌装，环绕式打印，和五轴运动将被显示。
Examples of 3d printed short range and long range antennas, electrical and optical sensors, via filling, wrap-around printing, and five axis motion will be shown.
图尔克的单轴测斜仪传感器测量与重力有关的角度倾斜。
TURCK's single axis inclinometer sensor measures angular tilt in reference to gravity.
针对双轴倾角传感器测量角度时引起的耦合干扰，采用了通过查询表的双线性插值和多传感器融合相结合的补偿方法。
To point to coupling disturbance made by the dual-axis tilt, it makes a study of compensation methods based on bilinear interpolation of query table and multi-sensor fusion.
结构上以模块化设计为特点，拧紧轴分为电缆接头模块，马达模块，减速模块，传感器模块，信号预处理模块，输出轴模块。
It features module designing, the spindle is composed of connector, motor, gear box, transducer, signal processing, and output shaft module.
这里我们使用了一个三轴传感器。
最好的检测是给予一个对象，站到传感器垂直轴。
The best detection is given by an object that stands vertical to the transducer axis.
便携式轴重仪主要组成部分为传感器，秤台台面、仪表、接线盒、数据线。
Portable axle load meter is mainly composed of sensor, weighing table, meter, junction box, data line.
多轴运动控制器是一种非常灵活的控制器，它可与各种类型的主机、驱动器、电机和传感器一起完成各种类型的功能。
Multi-axis motion controller is a very flexible controller. It can complete all kinds of functions together with each kind of host computer, driver, motor and sensor.
这只是一个挂接装置对电池的问题和固定的传感器和它的对金属板支撑底轴最接近交接箱。
It's just a matter of hooking the device to the battery and fixing the sensor and it's metal plate on the end of the prop shaft closest to the transfer box.
采用四象限探测器作为位置传感器，设计出以dsp作为控制器的双轴跟踪控制试验演示系统。
A demonstration system with DSP as controller used for testing double-axis tracking control techniques is designed by using four-quadrant detector as position sensor.
方向位移传感器采用激光单点位置探测器P SD,Z轴方向的位移测量精度达10纳米。
The displacement sensor of Z axis adopts single point laser position detector PSD, and its resolution is about 10nm.
本文介绍了轴销剪切式称重传感器的结构与特点，受力分析与理论计算。
This article introduces structure, characteristic, stress analysis and theoretical calculation of shaft pin cutting type load cell.
介绍了利用加速度传感器测量轴振功率的原理及方案，给出了实际应用情况的分析曲线。
The principle and the scheme of measuring the vibration power using ac2 celeration sensor are introduced , the analysis curve in the practice application is also presented.
次级带轮旋转传感器（41）检测输出轴 （22）的转速（54）并将其输出到控制单元（9）。
The secondary sheave rotation sensor (41) detects a rotational speed (54) of the output shaft (22d) and outputs to the control unit (9).
介绍了三轴姿态传感器HMR3000在系统中的应用，设计了相应的接口电路和数字式滤波器。
The usage of the digital compassHMR3000 in the controller is introduced and its interface circuit and digital filter are designed.
三轴磁传感器非正交性是近年来弱磁方面研究的一个热点，也是困扰磁传感器精度提高的一个障碍。
Non-orthogonality of three-axis magnetic sensor is a hotspot of weak magnetic research in recent years, and also an obstacle that interferes the increase of magnetic sensor's precision.
相隔距离是指传感器的最低点到Z轴捕获范围中心的距离。
Standoff distance is refers to the lowest point of sensor's distance to the center of the Z axis capture range.
相隔距离是指传感器的最低点到Z轴捕获范围中心的距离。
Standoff distance is refers to the lowest point of sensor's distance to the center of the Z axis capture range.
应用推荐