根据仿真结果分析，此模型能够根据所设定的气象条件较准确地实时仿真场景的红外图像。
According to the analysis of the results of the simulation, it's proved that this model can simulate the infrared images of the scene under set weather conditions more accurately in real time.
利用EMTP仿真结果分析了这相电流差动判据在超高压系统中的动作特性和电容电流补偿的效果。
In this article, the action characteristic of phase current-differential criterion in EHV system and the effect of capacitance current compensation have been analyzed using EMTP simulation result.
仿真结果分析证明了热绝缘结构在探测器设计中是占有重要地位的，同时说明本文所做工作是有意义的。
Analysis of the simulation result attests that the thermal isolation structure is important in the design of a bolometer detector thus endorsing the present work.
通过对基于该方法设计的BP网络离线训练后所进行的仿真结果分析与比较，使其有效性和可行性得以验证。
After the designed BP network be out-line trained based on the method, its efficiency and feasibility have be proved by comparing and analyzing simulated results.
在仿真结果分析和评价方面，从设备加工队列、产品加工时间、设备利用率和生产瓶颈分析等方面进行阐述。
In the simulation result analysis and evaluation process, this paper studied form equipment processing queue, production process time, equipment utilization ratio and production bottleneck analysis.
最后，针对仿真结果分析的生产线中的问题，提出了排产优化方案、在制品控制优化方案、人员配置优化方案分别重新建立了生产线物流的模型。
Finally, the problem of the production line is diagnosed by simulation and the model is rebuilt based on schedule optimized scheme, WIP optimized scheme, people optimized scheme.
最后，根据仿真结果分析总结了飞翼布局无人机的控制系统设计方法和设计特点，并提出一些具体的建议，为飞翼无人机总体设计提供了一定的依据。
Finally, main methods and characteristics of flying-wing UAV's control system design are analyzed based on nonlinear simulation results and some advice for improvement is presented.
时域仿真和特征值分析结果均证明该控制器具有的良好阻尼效果，在不同的时滞下仍然可以很好地提供阻尼。
The results from time-domain simulation and eigenvalue analysis prove that the proposed controller can provide good damping effect so far as to different time lags.
通过与BP算法的仿真结果比较分析，发现该算法具有稳定性好，收敛速度快，预测精度高的特点。
According to the analysis of simulation results compared with BP algorithm, this algorithm has the advantage of the fine stability, fast convergence speed and high precision.
结果证明此模型能够与实际运行情况很好地吻合，可用于仿真系统的构建、系统控制策略的研究及系统动态性能的分析等。
The results show that this model well conforms to the actual operation and can be used for simulation system construction, system control strategy study and dynamic performance analysis of the system.
仿真结果和理论分析结果相一致，所使用的仿真方法及得到的分析结果对工程设计及性能校核具有重要的参考价值和指导意义。
The simulation results are coincident with the theory analysis ones. The simulation method and results possess an important reference value and guidance to engineering design and capability checkout.
在此基础上采用有限元分析软件对永磁材料的磁导率为非线性时的一对永磁齿轮传动磁场进行了仿真分析，并对结果进行了分析总结。
On this basis, as the permeability of permanent magnetism material is non-linear, two gear wheel's magnetic field is simulated with finite element software, and analysis of the result is carried on.
对10阵元等间隔线阵的分析仿真结果表明该方法是有效的，并适用于其它阵型，对于声纳系统具有显著的应用价值。
Results of computer simulation for a 10-element equally spaced line array showed that these algorithms were effective, and can be applied to arbitrary array.
首先本文简要描述了LEACH协议的网络模型以及能量模型，随后介绍了利用OPNET进行LEACH协议建模的步骤，最后给出并分析了仿真结果。
Firstly the network model and energy model of LEACH are briefly described, then modeling steps of LEACH based on OPNET are introduced, lastly the simulation result is presented and analyzed.
对几个典型轨迹下激励器所需的驱动力进行了数值计算分析，计算结果与基于ADAMS建立的虚拟样机仿真结果相比不超过2%。
The driving forces of some typical trajectories are analyzed. The difference between the numerical simulation result of the virtual prototype and those in ADAMS is less than 2%.
针对电子膨胀阀步进电机驱动方式和本文的仿真结果，应用增量式PID和模糊控制方法进行实验分析。
PID and Fuzzy controllers are using in the experimentation based on the simulation results of the PID, fuzzy and fuzzy self-tuning PID controllers and the driven method for EEV.
理论分析和仿真结果表明，该非对称水印系统能够提供可靠的非对称检测，系统鲁棒性高。
The theory analysis and simulation results demonstrate that the asymmetric watermarking system can provide reliable asymmetric detections, and it has high robustness .
计算机仿真结果与理论分析相一致，证实了该算法比通常的补对算法和传统的LMS算法有更快的收敛速度。
Computer simulation results confirms the theoretical analysis and shows the new algorithm provides faster convergence speed than the complementary pair algorithm and usual LMS algorithm.
仿真分析结果表明了虚拟随机路面模拟的各种工况应用于ADAMS虚拟样机技术的可行性与有效性。
The results show that the method of inputting the dummy stochastic road model, which can simulate various kinds of extremity conditions to ADAMS, is feasible and effective.
仿真结果和分析表明该方案能在高动态环境下实现信号的快速捕获，且能较好地满足接收机动态性能和跟踪精度的要求。
The simulation results and analysis show that the designing realize the signal′s fast acquisition under high dynamic circumstance and keep dynamics performance and tracking precision at the same time.
应用标量解耦方法对T - II型异步电动机特性进行分析和仿真，结果较好地消除了转子回路参数对动态特性的影响。
Analysis and simulation using this approach to T-II asynchronous motor show that influence of rotor circuit parameter on motor dynamics disappeared.
通过对仿真结果的分析，对机柜整体结构和各功能模块在机柜中的空间位置进行了调整。
Based on the analysis to the simulation result, the configuration of the cabinet is reconstructed and the position of different function module is reorganized.
并通过对仿真结果的分析，提出在系统着陆期间利用GPS定位和测速数据实行逆风控制的方案。
Through the analyses of results of simulation, the solution about head wind control is presented that GPS orientation technology and the measured data of velocity should be adopted.
文中给出了圆周阵的测距、测向公式，并从理论上分析了测距性能，计算机仿真结果验证了理论分析的正确性。
The formulas of calculating range and bearing for circular array are derived, and ranging performance are analysed theoretically. The simulation results show that the theoretical analysis is correct.
流域水安全预警模型可以对流域内的水质情况进行预警，作为一个实例，建立了对湘江流域水安全系统预警模型，并进行了模型仿真及其结果分析。
As a application case, the water safety system pre-alarm model of Xiangjiang river basin was set up and the model simulation and the result analysis were carried out.
通过与BP算法的仿真结果比较分析，发现该算法稳定性好，收敛速度快，预测精度高。
Through the analysis of simulation results as compared with BP algorithm, this algorithm has the advantages of fine stability, fast convergence speed and high precision.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
应用推荐