对金属载体的生产工艺与设备参数以及金属蜂窝载体的产品技术条件进行了分析和介绍。
The production process, parameter and production of technical requirements of the equipments, metal honeycomb support are analyzed and introduced.
对金属载体的生产工艺与设备参数以及金属蜂窝载体的产品技术条件进行了分析和介绍。
The production process, parameter and production of technical requirements of the equipments, metal honeycomb support are …
将该胶应用于电源变换器整流组合作为灌封材料，经过产品技术条件考核，完全达到质量可靠性的要求。
The resin is applied in power transformer and rectifier as pouring material. Test of the properties shows that this resin meet the requirements of the reliability.
本文论述了我国内螺纹铜管业生产、工艺、产品技术条件、齿型及市场现状，提出了内螺纹铜管的研发方向。
This article discusses the production, process, product technical condition, gear size and market status about inner thread cu tube of our country, and proposes its developing trend.
中方愿扩大从印度进口，为印方信息技术产品、药品和农产品等进入中国市场提供便利条件。
The Chinese side said it will increase import from India and facilitate the access of India's it products, pharmaceuticals and agriculture products to the Chinese market.
采用该技术条件能得到具有独特风味的高质量产品。
The high quality product with unique flavor was obtained using the above technical conditions.
针对该产品的使用条件和技术要求，阐述了配方设计特点和生产工艺要点。
The formula design and producing technology were stated according to use conditions and technology requirements of the product.
简体中文标题：焊接消耗品。焊接填充材料的交货技术条件。产品类型、尺寸、公差和标记。
English Name:Welding consumables -- Technical delivery conditions for welding filler materials -- Type of product, dimensions, tolerances and markings.
技术工程部负责包装要求的提出和有关产品的贮存、防护条件的提出。
The Engineering Department is responsible for specifying packaging requirements and formulating storage and preservation standards.
本文在分析原有产品的基础上，根据目前的技术条件进行了改进。
Based on the analysis on the basis of the original products, according to the current technical conditions were improving.
介绍了氰化亚金钾的生产工艺过程、技术条件及所用原料和产品质量情况。
Have introduced the production technology course, technological condition and raw materials and product quality situation used of the inferior gold potassium of cyaniding.
焊接消耗品。焊接用填充材料的交货技术条件。产品型式、尺寸、公差和标志。
Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings.
特别申明：一切技术条件均以定购我公司的产品说明书为准。
Special statement: all the technical conditions will be subject to order my company's product manuals.
简体中文标题：焊接消耗品。焊接填充金属的交货技术条件。产品的类型、尺寸、公差和标记。
English Name: welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and markings.
对产品在质保期内的任何隐藏缺陷的要求，按照A方提出的技术条件，在保证期间届满后不超过15天。
Claim for any latent defects discovered during the guarantee period of GOODS, per the technical conditions is submitted to Party a not later than 15 days after expiration of the guarantee period.
经试验测试产品性能符合MT668-1997《煤矿用阻燃钢丝绳芯输送带技术条件》标准。
By testing, performance of the product met the standard of MT668-1997 of technical conditions of steel cord conveyor belt applied to coal industry.
在知识经济条件下，以知识、技术、信息等为主体的知识产品越来越多。
There are more and more knowledge products based on the knowledge, technology and information in the condition of knowledge economy.
本文着重论述了近年来在混合造粒技术机理方面的研究进展，特别是粘结剂对于成粒过程和产品质量的影响，并对造粒过程中的控制条件优化进行了评述。
The mechanisms of multi-component, especially the influences of binder on the product and the process of granulation were reviewed and the conditions of controlling were compared and predicted.
这两个条件在评估专利技术产品的价格并不可行。
The two conditions are not feasible to the evaluation of the patent merchandises price.
简体中文标题：光亮钢产品。技术交货条件。第1部分：总则。
English Name:Bright steel products - Technical delivery conditions - Part 1: General;
产品族设计是大规模定制条件下实现产品规模经济的关键技术。
Product family design is the key technology to achieve scaled economy under the condition of mass customization.
虽然大多数产品厂的模具车间、分厂技术力量强，设备条件较好，生产的模具水平也较高，但设备利用率低。
Although most products factory mold shop, factory technical force is strong, good equipment conditions, the production of mold levels higher, but equipment utilization rate.
结合生产实际和研究，制定了合理的二段式单体速冻荷兰豆生产工艺，给出了符合出口条件的产品技术标准。
Combined the practice with producing and studying, the technology of IQF pea pods and its product standard were outlined.
论述从模具设计到成品加工过程中，实现省喷涂显示器前框塑料件的技术条件，并着重讨论了各工艺因素对产品质量的影响。
This article introduces the technical conditions achieving the injection moulding saving spraying of plastic bezel in the whole process from the mould design to end-product.
研究超细锌粉气流分级技术工艺条件对产品粒度的影响因素。
The effect of the technical parameters on the particle size of the superfine zinc powder from the air-classification is investigated.
从企业的人员结构、技术结构、产品结构、组织结构、市场结构等方面研究了安电所的营销内部条件。
The personality, technology, product, organization, market, and etc. about the inner condition have also been covered.
铝和铝合金。施工作业用结构产品。检验和交付技术条件。
EN15088:2005 aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery.
铝和铝合金。施工作业用结构产品。检验和交付技术条件。
EN15088:2005 aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery.
应用推荐