实坚乳胶增黏剂是一种苯乙烯丙烯酸聚合物乳胶添加剂，可作为黏结剂、底层剂及抗潮湿封填剂。
Skim Ad-Bond latex is a styrene acrylic polymer latex additive for use as a bonding agent, primer, or damp resistant sealer.
实坚胶灰增贴剂是一种笨乙烯丙烯酸聚合胶液，也是一种高性能液体添加剂，专为增强胶灰的贴性伸缩性及强韧而制。
Skim tile Fix Ad-Plus is a styrene acrylic polymer latex. It is a high performance liquid additive specially designed to enhance the elasticity and strength of cement based tile adhesive.
以不同含量的乙烯丙烯酸共聚物(EAA)对聚乙烯(PE)进行了共混改性，研究了改性后实验样品中水树的生长情况。
Polyethylene (PE) has been modified by a small amount of mixing ethylene acrylic acid (EAA) copolymer. The water treeing in PE modified was also studied.
它介绍了丙烯酸、丙烯酸脂、苯乙烯四元共聚合成醇溶性聚丙烯酸脂类的方法。
It introduces how to synthesize acrylic acid, acrylate and phenylethene quadripolymer into alcohol-soluble acrylic resin.
采用不同的方法对乙烯基酯树脂(ver)中环氧丙烯酸酯(AAEP)进行羟基封闭，制备改性ver。
The hydroxyl groups of epoxy acrylate (AAEP) in VER were sealed with different methods in order to obtain modified VER.
本工作定量测定了2-乙烯基吡啶-甲基丙烯酸甲酯-铑络合物的烯烃催化加氢性能与共聚物配体序列结构的关系。
The quantitative relationships between the catalytic ability of Rh-complex of 2-vinyl pyridine-methyl methacrylate copolymer and the sequence structures of the copolymer ligands have been determined.
本文报导了苯乙烯—甲基丙烯酸铅新型光学塑料的合成及其性能的测试。
This paper reports the synthesis of a new optical plastic in the styrene-lead dimethacrylate copolymer and measurements of its properties.
本文详细研究了苯乙烯—M12和丙烯酸丁酯—M12两个反应体系。
Two polymerization systems were studied, which were styrene(St)-M12 system and butyl acrylate(BA)-M12 system.
其他塑料可以二次通过再热的方式恢复到可塑性状态，这些是热塑性塑料，如丙烯酸树脂，尼龙和聚乙烯。
Other plastics can be repeatedly reheated to return to the plastic state; they are thermoplastics. Examples of thermoplastic plastics are acrylics, nylon, and polyethylene.
研究了实验室制备的两种导电聚苯胺材料与乙烯-丙烯酸共聚物（EAA）的共混及共混物的导电性能和微观形态。
Studied in this paper were the conductive properties and the microstructure of two blends of polyaniline with EAA, doped with ethylene-acrylic acid copolymer and DBSA respectively.
超疏水表面制备了大量接枝丙烯酸到高密度聚乙烯。
Superhydrophobic surface fabricated by bulk photografting of acrylic acid onto high-density polyethylene.
用四溴双酚a、环氧氯丙烷和丙烯酸为原料合成了阻燃型乙烯基酯树脂，其阻燃性能良好。
Flame retardant vinyl ester resin using tetrabromo bisphenol a, epichlorohydrin, acrylic acid as raw materials was also synthesized, Its flame retardant property was excellent.
将聚氨酯丙烯酸酯齐聚物(PUA)与过氯乙烯(CPVC)共混制成渗透汽化膜并用来分离乙醇水溶液。
The UV Curing polyurethane (PUA) was blended with chlorinated polyvinyl chloride (CPVC) for Pervaporation membranes, which were used to separate ethanol water mixture.
以醋酸乙烯酯和丙烯酸丁酯为主要原料，引入自交联型单体羟甲基丙烯酸胺合成了纸张——铝箔复合膜粘合剂。
The self - cross linking adhesive for paper - Al foil composite can be abtained by using vinyl acetate and acrylate as raw materials and hydroxy methyl acrylamide as self - cross linking monomer.
本论文采用乳液聚合的方法合成了聚醋酸乙烯树脂，并通过加入硬单体—甲基丙烯酸甲酯对其进行改性。
The method of emulsion polymerization was used to synthesize polyvinyl acetate resin by adding hard monomer_methyl methacrylate to modify it.
这些化合物能均聚反应，亦易与苯乙烯、甲基丙烯酸甲酯及丙烯腈等乙烯类单体共聚合，得有色的高聚物。
These colored compounds can be homopolymerized and copolymerized with most vinyl monomers such as styrene, methyl methacrylate and acrylonitrile, to give the corresponding colored polymers.
以过氧化苯甲酰（BPO）为引发剂，二甲苯为溶剂，进行了丙烯酸与低密度聚乙烯（LDPE）的溶液接枝聚合。
The grafting of acrylic acid on to low density polyethylene(LDPE) was studied in solution. Benzoyl peroxide(BPO) and xylene were used as initiator and solvent respectively.
乙烯-丙烯酸共聚物（EAA）和三梨糖醇在抑制聚乙烯的水树形成机理上有所不同。
Different mechanisms to inhibit water treeing were found for ethylene-acrylic acid(EAA)copolymer and sorbital.
在乙醚溶液制得的聚苯乙烯次甲基锂与甲基丙烯酸甲酯反应不能分离出聚甲基丙烯酸甲酯及它的接枝共聚物。
Neither polymethylmethacrylate nor polymethylmethacrylate-grafted copolymer could be isolated by the reaction of polystyrene methylene lithium prepared in ether solution with methyl methacrylate.
可以作为金属涂布的底基材料使用的树脂系统有乙烯、聚酯或丙烯酸等。
Can be used as base metal coating materials used vinyl resin system by plastisol or solution, polyester or acrylic, etc.
中心核主要由疏水性的苯乙烯组成，外壳主要由亲水性的丙烯酸组成。
The core is mainly composed of hydrophobic styrene, while the shell is mainly composed of hydrophilic acrylic acid.
以二乙烯基苯为交联剂，由甲基丙烯酸甲酯、苯乙烯、甲基丙烯酸模型浇铸共聚，制得了一种交联型改性有机玻璃。
A kind of crosslinking modified organic glass was prepared by mold copolymerization of methyl methacrylate, styrene, methacrylic acid with divinylbenzene as crosslinking agent.
近几年国外开发的VAE与氯乙烯、丙烯酸酯等共聚新品种，扩大了VAE的应用范围。
Recently the application has been widened by the development of new products produced by co-polymerization of VAE with vinyl chloride and acrylates.
以最常见的两种单体甲基丙烯酸甲酯和苯乙烯为例。
Take the most widely used monomers, styrene and methyl methacrylate as an example.
采用预辐射法研究了丙烯酸对聚乙烯膜的接枝反应。
The grafting of acrylic acid onto a polyethylene film by the pre-irradiation method was investigated.
本文采用乙烯类和丙烯酸酯类单体、阴离子乳化、氧化还原系统引发反应体系对酪素进行接枝改性，以正交试验法优化合成反应条件。
In this paper, the grafting modification of casein was carried out by using vinyl and acrylic ester monomers, anionic emulsifier and REDOX catalyst system.
以丙烯酸酯为单体，二乙烯基苯为交联剂，采用悬浮聚合法合成低交联度的聚丙烯酸酯类吸油树脂。
The acrylate oil absorbing resin were synthesised by means of suspension polymerization and using divinylbenzene as crosslinking agent.
热固型丙烯酸涂料是由丙烯酸和甲乙基丙烯酸酯，丙烯酸和甲基丙烯酸，或苯乙烯反应而成。
Thermoset acrylic coating are based on resins prepared from acrylic and methacrylic esters, acrylic and methacrylic acids, and / or styrene.
热固型丙烯酸涂料是由丙烯酸和甲乙基丙烯酸酯，丙烯酸和甲基丙烯酸，或苯乙烯反应而成。
Thermoset acrylic coating are based on resins prepared from acrylic and methacrylic esters, acrylic and methacrylic acids, and / or styrene.
应用推荐