制动杆的轴孔应指向对主销的顶部。
The brake lever axle hole should be pointing towards the top of the kingpin.
使用弹簧夹，固定安装的主销和轴一起。
Using a spring clamp, fasten the kingpin and axle mount together.
产品主销美国，欧洲，东南亚，中东等。
We've been expanding our market in USA, Europe, South East Asia and Middle East.
轴承每个这些杆是连接到主销的两端轴承。
Each of these rod bearings is attached to the ends of the kingpins.
粮食非主产区应转变“主销区”的观念，承担相应的粮食生产任务。
The non-major grain production area should change the mind of being "main food consumption area" and be responsible to grain production.
转向横拉杆的长度同主销间的距离不相等，就可保证各前轮以期望的角度旋转。
It is obtained by making the track rod a different length to the distance between the king pins.
转向横拉杆的长度同主销间的距离不相等，就可保证各前轮以期望的角度旋转。
It is obtained by making the track rod a different length to the distance between the king pins (or wheel swivel axis centers).
铜杰克斯通故意编排抢劫银行才能被扔进监狱与臭名昭著的俄罗斯主销巴拉姆。
Copper Jack Stone purposefully orchestrates a bank robbery in order to be thrown into prison with the notorious Russian kingpin Balam.
根据该模型得出影响主销后倾测量精度的因素为主销内倾、车轮外倾及转角盘转角。
The model showed that the factors affecting the caster measuring precision are the kingpin inclination, the camber, and the turntable Angle.
所生产的国产、进口车型的转向节主销、转向节主销修理包更受广大用户的一致好评。
The production of domestic, import models of the steering section of the main pin, steering knuckle kingpin repair kit is more popular with users alike.
厂家现已建立起一个完善的经营与服务网络。产品以主销欧美地区、东南亚等国家和地区。
Factory has established a perfect management and service network. "products with the kingpin in Europe, southeast Asia and other countries and regions."
进而通过主销横向、纵向偏移距以及主销内倾角和主销后倾角，计算出内倾拖距和后倾拖距。
Then through these two offsets, as well as kingpin inclination and caster, kingpin offset and caster trail can be calculated.
简要介绍空气悬架导向臂的设计改进过程，并对改进前后的导向臂和主销后倾角进行简要分析。
This text introduces the process of design improvement of the air suspension guide arm, and analyzes the guide arm and kingpin caster Angle before and after the improvement.
前轮摆振是指汽车在平坦的路面上直线行驶时，转向轮以一定的幅度和频率绕主销持续振动的现象。
Front wheel shimmy is the phenomenon that steering wheels vibrate around king-pin axis with a certain amplitude and frequency when the vehicle travels in a straight road.
通过分析车轮转动时轮心相对于主销轴线的运动，推导出主销横向偏移距及主销纵向偏移距的算法；
Through the analysis of the rotation of the wheel center round the kingpin axis, derive spindle offset and longitudinal kingpin offset algorithm;
介绍了世界纺织服装贸易现状，中国纺织服装出口的主销市场及其中国出口纺织服装在主销市场中的地位。
The article introduces the situations of world textile trade, the main markets that China exports textile and garment and China′s status in main textile import markets.
本文建立了轮式车辆非对称分段式转向机构两转向节主销转角之间的关系式，以及该种机构的优化设计数学模型。
A formula is set up for two rotating angles of steering pins in a non-symmetry split-steering mechanism and an optimum design mathematical model is made for it.
基于汽车主销倾角测量原理，从车轮转角测量误差角度出发，对汽车主销内倾角和主销后倾角的测量误差进行了分析。
Based on vehicle kingpin Angle measuring theory, the paper analyzes the measuring errors of kingpin inclination Angle and kingpin caster Angle from wheel steering Angle measuring errors.
转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。
The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.
汽车车速、转向系统扭转刚度和主销后倾角对回正性能的影响较大，而转向系统的粘性摩擦系数对回正性能的影响相对较小。
Returnability is affected mainly by automobile velocity, torsional stiffness of steering system and caster angle and relatively little by viscous friction coefficient of steering system.
转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
转向系统包括转向盘，转向轴，蜗杆，扇形齿轮，转向摇臂，直拉杆，转向节臂，主销，转向臂，转向直拉杆，前轴和转向节。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
应用ADAMS软件的CAR模块建立了轿车多连杆式前悬架和转向系统的多体运动学模型，对主销和前轮定位角进行了仿真计算研究。
Kinematic model for a car's front multi-link sus-pension and steering system was developed using ADAMS/CAR module. An investigation was done of the suspension's kingpin axis and wheel orientation.
现我公司主导产品为中重型卡车配套生产转向节主销、钢板弹簧销系列及钢板弹簧吊环系列。现有三大系列百余种产品，在一汽集团内市场占有率达到100%。
Our main products include redirector dowel, armor plate spring dowel, armor plate spring stationary rings series. there about hundred products of three series which occupancy 100% at FAW market.
针对弹力竹节织物织造过程中的技术难点，提出了增加纱线捻度、合理上浆工艺、减小喷气压力、增大主喷嘴和止纱销的角度等技术措施。
This paper puts forward such methods as increasing yarn twist, optimizing sizing technology, reducing whiff pressure, and enlarging the chief jet nozzle and the angle of yarn stop pin, etc.
针对弹力竹节织物织造过程中的技术难点，提出了增加纱线捻度、合理上浆工艺、减小喷气压力、增大主喷嘴和止纱销的角度等技术措施。
This paper puts forward such methods as increasing yarn twist, optimizing sizing technology, reducing whiff pressure, and enlarging the chief jet nozzle and the angle of yarn stop pin, etc.
应用推荐