提出一个应用于非线性补偿的主从控制型的并联双模糊控制器。
The paper proposes a principal and subordinate parallel bi-fuzzy controller used to compensate for the nonlinear friction.
该生产线采用基于PLC的主从控制系统来控制，可靠性高、操作方便。
It is controlled by the master slave control system based on PLC, with high reliability and convenient operation.
本文介绍变频器在主从控制中的工作原理及其实现方法，并论述令鬻种实现方法的控制特点。
In this paper the author introduces the principle of the Master - Slave control of frequency converters provides the realizing method and discusses the characteristic of different control means.
本课题是在借鉴国际先进水平和设计思路的基础上，设计一种双cpu主从控制的颜色分选系统。
After studying the international advanced technology and design thoughts, a double CPU master-slave color sorting system is designed in this thesis.
通过对各种方案的优缺点进行分析和对比，最后选择了一种最合理的设计方案即双机主从控制方案作为最终设计方案。
By analyzing the excellence and the shortcoming of all the design projects, we select the best design project which is that the system be controlled by two computers.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
提出了一种热卷箱与粗轧和精轧互为主从的主令速度控制新方法。
A new approach to master speed control is proposed, in which coil box and roughing mill and finishing mil are combined with each other as master-slave device.
根据系统的实时性和跟踪精度指标，设计了主从式结构计算机控制系统。
Based on the real time and tracking accuracy indexes, the master-slave computer control system is designed.
相对于传统PID主从同步控制方法，同步偏差的移动平均差减小18.2%，移动标准差减小61.5%，可以保证光刻机的曝光效果。
Compared with the conventional PID masterslave control method, the move mean difference is reduced by 18.2% and the move standard deviation is reduced by 61.5%, and the exposure effect can be ensured.
系统设计为主从式两级微处理器控制结构。
The system is of the controlling structure of subordinate two-poles microprocessor.
分析了一个具有扇区非线性输入且含有参数不确定性以及外部噪声干扰的主从混沌系统的同步控制问题。
This paper analyses the synchronization control for a class of master_slave chaotic systems with parameter uncertainties, external noise disturbances and sector nonlinear input.
对一种可用于配电自动化管理的基于智能通信控制器的主从式dcs系统进行了研究和设计。
A kind of DCS system that is based on intelligent communication controller and can be used in the power distribution automation management is researched and designed.
在载车板控制单元中，分别介绍了主从机通信、输入信号检测、状态显示、手动功能以及电源的设计方法。
As to the loading board part, many design methods are introduced, such as master-slave communication, input signal detection, status displaying, manual action, power supply and so on.
文章讨论了控制变量耦合的受限系统的主从对策问题。
The paper presents Stackelberg games for the systems with coupling control variable.
本系统采用两级微机控制，主从分布式监测系统结构。
This system is controlled by a two-level computer, and it is a distributed inspecting system with a principal and subordinate structure.
该系统采用主从式上下两级微机网络结构，上位机完成系统的管理，控制下位机执行具体的操作。
Two levels master-slave microcomputer network is applied to this system. The master computer manages the system and controls the slave microcomputer to excuse the operations in details.
控制网络现场总线采用物理层、链路层和应用层结构。链路层以主从循环查询获取数据。
The structure of physical layer, link layer and application layer was applied in field-bus of network control, data was gained through cyclic query of principal and subordinate PC in link layer.
控制系统由TMS320C25及486计算机组成的主从机系统实现。实验结果表明此种控制方法是有效的。
The control system is realized by the host slave system, which consists of 486 computer and TMS320C25. Experimental results have demonstrated the effectiveness of this kind of control strategy.
本文叙述了主从式温度测量控制系统的基本组成、工作原理、程序控制框图和系统的特点。
In this paper, the basic constitute, working principle, program chart and character of the main-subsidiary system measuring and controlling temperature were given.
本文对一种国滞非线性基础隔振的主从结构模型用瞬态最优控制法进行振动控制研究。
Instantaneous optimal control of a model of primary-secondary structure with hysteretic and nonlinear base-isolation is studied in this paper.
介绍一种用VB工具软件开发集散型控制系统的方法，并用主从式通信控制方式解决了通信网络中的总线竞争问题。
This paper introduces means to develop a distributive control system with VB language. With main follow control manner, the problem of bus competition is overcomed.
介绍净化搬运机械手的总体结构和主从配置的控制系统。
We introduced the control system of the depurative transportation manipulator in the point of its whole structure and its principal and subordinate configure.
本文设计了一种用于饲料生产设备的主从式控制系统，系统由工控机和PLC组成。
This paper presents a principal and subordinate control system for feed equipments. The control system is combined with a industrial control computer and a PLC.
其中，主从CPU结构的控制单元具有很高的控制精度。
本文在对CNC系统进行面向对象分析的基础上，建立了以PC机作为上位机，DSP运动控制器作为下位机的主从式数控铣床系统。
Based on the object-orient analysis of CNC system, the paper proposes a design idea of master-slave CNC system, which builds with PC as upper chip and motion controller with DSP as lower chip.
我们分析了RS - 485主从式多机通信的缺点，提出了对等式多机通信网络控制。
After researching the defects of RS485 in master-slave mode, control network of equivalent mode in multiple computer's communication is put forward in this paper.
通过与手术机器人控制系统的集成，虚拟手术仿真还可以为机器人系统的主从运动控制提供精确的定位信息。
Besides, by integrating with surgical robots, virtual surgery simulation could also afford accurate positioning information to master-and-slave motion control of the robot systems.
本系统采用分布式计算机控制系统，由一台PC机和多台单片机构成主从式总线型结构。
This system USES the distributed computer control system and is made of a PC and several SCMs, which show a principal and subordinate structure with bus style.
本系统采用主从式结构，主站微控制器以S3C 2410微处理器为核心，从站微控制器以at89s52单片机为核心。
The system used the master-slave structure, the master microcontroller based on S3C2410 microprocessor core, the slave used to AT89S52 microcontroller core.
本系统采用主从式结构，主站微控制器以S3C 2410微处理器为核心，从站微控制器以at89s52单片机为核心。
The system used the master-slave structure, the master microcontroller based on S3C2410 microprocessor core, the slave used to AT89S52 microcontroller core.
应用推荐