上位机、下位机之间通过RS232C串行通讯接口总线交换数据。
The communication between host computer and slave computers is accomplished through their serial ports, RS232C.
可带串行通讯接口,可与各种带串行接口的设备进行双向通讯,组成网络控制系统。
It may with serial communication interface, can carry out both - way communication between it and every device with serial interface, and constitute network control system.
概述了DSP系统的存储器空间设置、同步串行接口、串行通讯接口、主接口的特点;
The memory spaces configuration, synchronous serial interface (SSI), serial communications interface (SCI), host port of the DSP system are summarized.
概述了DSP系统的存储器空间设置、同步串行接口、串行通讯接口、主接口的特点;
The memory spaces configuration, synchronous serial interface (SSI), serial communications interface (SCI), host port of the DSP …
应用串行通讯接口技术把智能温度控制仪表和微机连接,实现了温度自动控制和采集的自动化。
In order to control and acquire temperature data automatically, Serial Communication Interface Technology was adopted to link intelligent temperature control instrument with PC.
硬件采用单片机系统和微机系统相结合的形式,通过标准串行通讯接口实现天平、单片机和微机之间的对话。
The hardware is composed of single chip computers and PC. The dialogue between thermal balance, single chip computers and PC is performed thro…
硬件采用单片机系统和微机系统相结合的形式,通过标准串行通讯接口实现天平、单片机和微机之间的对话。
The hardware is composed of single chip computers and PC. The dialogue between thermal balance, single chip computers …
以GC - 06蓝牙接收模块、SD储存卡和RS232串行通讯接口为数据传输接口的蓝牙接收装置设计。
Take GC-06 blue tooth receive module, SD storage card and RS232 serial communication connection as data transmission connection.
文本介绍了带有RS-232串行通讯接口和非易失静态存储器的多功能数据采集仪。并详细描述了其系统功能、特点和工作原理。
This paper introduces a practical multipurpose data acquisition instrument with RS-232 and nonvolatile SRAM. It gives a minute description of system function, features and operational principle.
仪器具有标准串行通讯RS- 232c接口,可实现与电脑或计算机的通讯。
In apparatus having a standard serial communication RS-232C interface, can be realized with the computer or computer communication.
本文给出了8n位二进制数串行通讯扩展接口板的设计。
This paper presents the design of extended interface in serial communication with 8n-bit binary number.
提出了一种利用通用I/O口实现串行异步通讯的方法,该方法接口简单,程序实现方便,特别适合各种单片机应用系统。
Serial asynchronous communication can be realized through universal I/O interface. The simple connection and considerate programming aim at various SCM application systems.
微机和下位机的通讯采用RS232串行接口,适用于远距离通讯。
The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
介绍了一种基于嵌入式网关的串行接口通讯的设计方案。
This paper introduces a design scheme of a serial port communication technology based on embedded gateway.
该接口也可以用于和其他控制器的快速通讯(同步串行)。
This interface can be also be used for a fast communication (synchronous serial) with other controllers.
本文介绍了用于激光三维图像数据采集系统中的硬件数据补偿电路和实现高速串行通讯的RS- 422接口电路。
In this paper we mainly discuss the data compensating principle and its circuit accomplishment, RS-422 interface adaptor which are used in a high-speed data acquisition system.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯,组成了步式控制系统。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
本文阐述了主从式多机通讯的原理,提出了一种基于RS-422串行通信接口的方案和软件设计方法。
This paper describes the principle of multicomputer communication, and also the hardware and software implementation method based on RS-422 bus is given.
介绍了一种基于嵌入式网关的串行接口通讯的设计方案。
Study on the communication scheme of signal modulation and demodulation based on serial interface;
本文推荐的SDI— 12通讯标准是近五年来欧美国家在环境监测中广泛使用的一种串行数据通讯接口协议。
The SDI-12 communication standard, a kind of serial data communication interface protocol, is widely used in environment monitoring in Euro-American countries.
并且使用了广泛应用的RS- 485电气接口的串行通讯技术作为通讯方式,文中分析了发送数据桢的过程,并制定了通讯协议。
And it USES asynchronous serial communication technology based on RS-485 electric interface as communication means. The process of sending data frames are analyzed and communication protocol was made.
所有智能化单元应有通过串行连接口与其他设备进行通讯的装置。
All IDUs shall have the facility for communication to other equipment, via a serial link.
设计了PLC与PC机串行通讯口之间信号适配器硬件电路,包括输入接口电路、输出接口电路。
This research works out a design of signal adaptor circuit of serial communication port between PLC and PC, including input interface circuit and output interface circuit.
本文讨论用EIARS- 232c串行接口作为通讯线路,并选用国际链路层通讯协议HDLC进行FMS中主机与CNC系统的通讯。
In dealing with the communication between host computer and CNC system in FMS, EIA RS-232C serial interface and HDLC data link are used.
串行口支持3种通讯规范,可以很方便地嵌入到使用RS-485通讯接口、RS-232通讯接口和电流环通讯接口的网络节点中;
Serial interface supports three communication criterions and can easily embeds itself to network nodes being composed of RS-485, RS-232 and circuit.
所有串行连接口和通讯设备应提供双线,当发生单一部件或连接故障时可直接转换至备用设备。
All serial links and communications equipment, shall be provided on a dual redundant basis, such that failure of a single component or link will effect a seamless transfer to standby equipment.
串行通讯时,规定通讯双方必须使用相同标准的接口,使得不同的设备能够快速有效地连接起来进行通讯。
Serial communication, communication both sides must use the same set of standard interface, so that different devices can be connected to communicate quickly and efficiently.
电气接口适应范围大,串行、并行两种通讯方式可选。
Large electric interface range and serial and parallel communication are optional.
电气接口适应范围大,串行、并行两种通讯方式可选。
Large electric interface range and serial and parallel communication are optional.
应用推荐