下水后中间轴和螺旋桨连接后校中。
Aligning intermediate shaft and propeller shaft after launching.
螺旋桨轴(中间轴)机加工尺寸检查。
Inspection machining dimension of propeller shaft (intermediate shaft or counter shaft).
下水后主机曲轴和中间轴连接后校中。
Aligning main engine's crank shaft and intermediate shaft after launching.
中间轴及轴承。
②分析了采用干式双离合器的双中间轴式DCT的结构特点;
Features of transmission schemes for DCT using double side clutch and dual clutch and so on are analyzed;
接着分析了中间轴自由横动量的变化对机车横向平稳性的影响。
Also analyzed is the influence of the change of the middle wheelset free horizon movement to horizon ride index.
液体掺和方法可以在混合机中间轴位置通过液管,连接雾化喷嘴。
The mixing of liquid can be realized by adding a liquid pipe at the central shaft of the mixer and then an atomizing nozzle can be connected to the liquid pipe.
这些中心进行的中间轴承支撑结构是可旋转沿垂直于横梁第二轴轴报告。
These center bearings carry an intermediate support structure which is rotatable thereon along a second axis perpendicular to the axis of the cross member.
为了补偿轴向位移,经常在双十字万向联轴器的中间轴上采用轴向滑动装置。
In order to compensate axial displacement, an axial sliding mechanism is often used in the intermediate shaft of a double universal joint.
由于制造缺陷,在设备运行中中间轴跳动值超标,从而引起设备振动大而停机。
As the defects produced in its manufacture process, the jumping value of the mean axis was out of the standard during its running, so it gave rise to great vibration of the equipment and stopping.
对变速箱中间轴键的强度进行了校核,提出了对中间轴脱键及键损坏等质量问题的改进措施。
This paper makes the strength check of gearbox's middle axle key, and advances the improving countermeasures for its quality problems such as running-off-key and key damaging of the middle axle.
中间轴上叶片采用箱板式结构,提高生产效率,叶片材质采用Q 345耐磨,延长使用寿命。
The blade in the intermediate shaft adopts box plate type structure, to improve production efficiency; the blade adopts Q345 wear-resistant material, to extend the service life.
第一和第二扭矩传递装置,能操作用于将扭矩从所述输入元件分别传递到所述第一中间轴和所述第二中间轴;
First and second torque-transmitting devices are operable for transmitting torque from the input member to the first and second intermediate shafts, respectively.
在冷热两种状念下进行了轴系合理校中计算,并确定中间轴临时支承的位置、法兰间偏移与曲折值各安装工艺参数。
Rational aligning calculation of propulsion shafting in cold and warm conditions, and confirm several fitting technics parameters include of temporary supports, sags and gaps between flanges.
得出通过设置合理的中间轴自由横动量可以改善机车的曲线通过性能,而且该措施不会对机车的横向平稳性产生大的负面影响。
It is concluded that the relevance middle wheelset free horizon movement can improve the dynamic performance of the curve passing performance, and with little influence on the horizon ride index.
分析了三轴转向架构架在有限元计算分析时,约束的施加必须保证三根轴的轴重一致性;分析比较了中间轴一系簧垂向刚度对构架强度产生的影响。
When establishing finite element calculation model of three-axle bogie frame, it must be certain that the weight of each of the three axles is equal while adding restraint.
为了扩展车架并打造一个可调节平台,蒂尔在自行车中间设计了一个既轻且硬的长轴。
To extend the frame and create an adjustable platform, Teal designed a long span in the middle of the bike that was light and rigid.
第82和83行在y轴的顶端和中间各划一条水平虚线,这样做只是为了让查看图时更方便。
Lines 82 and 83 draw a dotted line at the top and halfway down the Y-axis. This simply makes the graph easier to read.
第86和87行在顶端和中间标记y轴。
On lines 86 and 87, the Y-axis is labeled at the top, and halfway down.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
一个轴具有-1和1之间的值。中间位置为0。这种情况用于操纵杆输入和键盘输入。
An axis has a value between -1 and 1. The neutral position is 0. This is the case for joystick input and keyboard input.
双向压力球轴承有安装于轴上的中间圈和两个外圈,在中间圈与外圈之间分别加有钢球,能够承受双向轴向负荷。
Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
壳体上有标准的螺孔与阀门或支架相连。中间输出轴为一个标准的内八角。
There is standard bolt hole connecting with the valve or bracket. The output axis in the middle is a standard internal octagon.
得到的吸附等温线分为三个不同区域:低压区等温线对压力轴呈凹形,高压区呈凸形,中间部分近似为直线。
The isotherm was devided into three different sections, at low pressure it is concave, at high pressure it is convex and the middle section it is nearly linear.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
The main parts include pump body, pump cover, impeller, axis, sealing rings, intermediate support, sealing and suspension parts and other components.
文章通过建立各中间坐标系,用齐次矩阵方法详细论述了两种典型5轴数控机床空间运动算法。
In this paper, the spatial kinematics algorithms of two typical 5-axis NC machines have been proposed with the foundation of intermediate coordinate systems and the homogeneous matrix.
负载和气缸可绕铰轴在一个平面内摆动,气缸长行程时,建议采用中间铰轴式。
The load and air cylinder can swing round the pin in a plan, if the stroke is long, adopt the intermediate fixed or movable trunnion type.
为探讨岩石的强度理论和中间主应力效应,进行了红砂岩真三轴压力试验。
The true triaxial pressure experiment for red sand rock is conducted for the purpose of investigation into the strength theory of rock and the effect of intermediate main stress.
为探讨岩石的强度理论和中间主应力效应,进行了红砂岩真三轴压力试验。
The true triaxial pressure experiment for red sand rock is conducted for the purpose of investigation into the strength theory of rock and the effect of intermediate main stress.
应用推荐