它可以在超导体（一种能导电的材料）和绝缘体（一种不导电的材料）之间转变。
It can change between a superconductor a material that conducts electricity, and an insulator a material that doesn't conduct electricity
非金属一般为气体或不导电的软固体。
Nonmetals are generally gases or soft solids that do not conduct electricity.
特别是在微孔加工和不导电的超硬材料加工方面更显示出其优越性。
However, it is found that it is difficult to get the dimensions machined be maintained.
绝缘层：涂于电极或挂具的某一部分，使该部位表面不导电的材料层。
Insulating layer: coating on the electrode or hanging fixture, a part of the surface of the part of conductive material layer.
通常情况下，环绕探头的油是不导电的，此时控制装置处于断电状态。
Normally the oil surrounding the probes is nonconductive and the control will be de-energized.
带负电的电子趋于向正极集中，但无法通过不导电的绝缘体(多数时候，会有一些漏电)。
The negatively charged electrons want to join the depleted (positive) side, but can't cross over that non-conductive insulator (for the most part, anyway-there is some leakage).
奥尔德林当时使用的是毡制粗头笔，它的尖头是不导电的，接触开关不会造成短路或引发火花。
Aldrin relied on a felt-tip marker, since the non-conductive tip would close the contact without shorting it out, or causing a spark.
与电子只在边缘移动的一个原子厚度的薄片不同，上诉情况下一层层的电子绕着不导电的内部区域流动，就像缎带绕着生日礼物一般。
Unlike atom-thick slices, where the electrons travel around the edge, in this case layers of electrons should circle a non-conducting interior like a ribbon encircling a birthday present.
SprayCool已经申请了专利的这项两阶段液态冷却技术使用了无腐蚀、不导电的液体薄雾。把这种薄雾喷在一个薄片上，然后蒸发并冷却电子设备。
SprayCool patented two-phase liquid cooling technology USES a fine mist of non-corrosive, non-conductive liquid, sprayed in a thin layer, which evaporates and cools electronics.
导演不情愿降低半导体的导电率。
The conductor is reluctant to reduce the conductivity of the semiconductor.
在隔离状态下镓盐与有机复合物皆不导电，但Hla和他的同事们有证据表明由这两种物质组成的金属线有超导特性。
In the isolated state gallium salt and organic compounds are non-conductive but Hla and his colleagues have evidence that these two substances formed by the metal lines are superconducting properties.
导演不情愿降低半导体的导电率率。
The conductor is reluctant to reduce the conductivity of the semiconductor.
固定在固体中的正离子和负离子不导电。
Positive and negative ions fixed in a solid do not conduct a current.
提出电路的输入电感工作在不连续导电模式（DCM），而输出电感工作在连续导电模式（CCM）。
The input inductor can work at its Discontinuous Conduction Mode (DCM), while the output inductor works at its Continuous Conduction Mode (CCM).
但由于硬度高、脆性大、大多数陶瓷材料不导电，传统的机械加工方法难以加工，使用范围受到限制。
However, it is difficult to machine this material in conventional machining methods because of its high hardness and brittleness as well as inconductvity, thus restricting its application area.
叙述了不焊接化成工艺极板质量的不一致性，其产生的主要原因就化成工艺来说是极板与导电母条的接触电阻的不一致。
It has been shown that the quality plates formed by tackless formation is strongly linked to the con- tact resistance between the plates and conducting bus bar.
真空（溅）镀膜有完整的加工设备，可提供UV、不导电NCVM、EMI、硬化…等表面加工处理。
There are integrated equipments on vacuum sputtering plating which can provide surface fabrication such as UV, NCVM, EMI, induration.
插座外壳包括利用金属屏蔽层进行金属化的不导电衬底。
The jack housing includes an electrically non-conductive substrate metallized with a metal shield layer.
它是不导电，不需要老化时间实现最大的效率。
It is non-conductive and does not require a burn-in time to achieve maximal efficiency.
特性：导电橡胶鞋底能导出人体静电荷，鞋底不析出粉尘，能有效抑制人体在无尘室静电的产尘。
Special conductive rubber soles: human electrostatic charge can be derived, not precipitated dust soles. Room can be effectively suppressed human electrostatic dust in the dust.
即通过在金属基材上形成选择性的导电与不导电图形，来制作深纹的“微杯”金属模具。
The Microcup pattern with insulating material was made on metal substrate and the mould was obtained with follow-up process.
聚氨酯成本低，制作费用低，可随意浇铸，适用于要求不产生火花和不导电材质的设备。
A cost effective alternative requiring less expensive fabrication, infinitely mouldable polyurethane is also suited to applications requiring non-sparking and non-conductive material.
聚氨酯成本低，制作费用低，可随意浇铸，适用于要求不产生火花和不导电材质的设备。
A cost effective alternative requiring less expensive fabrication, infinitely mouldable polyurethane is also suited to applications requiring non-sparking and non-conductive material.
应用推荐