齿数不同的一对齿轮能够提高或降低转速。
A pair of gears with different number of teeth will increase or decrease the speed of rotation.
分析了端面齿廓形状与螺旋角及齿数的关系。
Besides, the relationship between the tooth shape and the helix Angle, and the number of teeth are studied.
导出了机床展角和跳齿数的理论数学计算公式。
The mathematical calculational formulas of machine tools turning Angle and tooth-leap number are deduced in theory.
用此方法,可便捷地计算高精度挂轮的优化齿数。
Using the methods, the calculation of optimized number of teeth of a high_precision change spur_gear can be rapidly made.
这种设计方法对大模数少齿数的矿山齿轮尤为适用。
This new method may apply to large modular and less-teeth gear design, especially for mine machinery.
求解变位系数和最小齿数的方法可适用于所有节距的齿形链机构。
The approach presented to achieve the modification coefficient and the minimum tooth number is applicable to the silent chain mechanism with all kinds of pitches.
讨论了固定安装滚刀的结构特点及少齿数齿轮加工技术的可实现性。
It discussed the structure characteristic of fixed hob and machining technology feasibility of small teeth gear.
针对齿数、模数的规范性和离散性要求,进行了相应的离散优化处理。
To satisfy the requirement of the standardization of serrate number and module of gear, the corresponding discrete optimization is provided.
提供了一种少齿数齿轮传动系统输出运动误差和回程误差角的计算方法。
A kind of calculation method for outputting motion error and return stroke error Angle of less toothed gear drive system was provided.
对渐开线齿形链轮的根切状态进行了研究,求解了不发生根切的最小齿数。
The undercut of the involute sprocket is investigated to derive the minimum tooth.
本文介绍了一套比较实用的挂轮计算方法,可方便地计算出高精度挂轮的优化齿数。
This paper introduces a set of practical calculation method of change differential gears, which can conveniently calculate the optimum teeth number of change gears with high accuracy.
分别分析了基蜗杆半径、插齿刀模数、齿数、压力角对基蜗杆曲面奇异点位置的影响。
The influence of the base worm radius, the module of shaper, the teeth number and the pressure Angle on the singularity point were analyzed, respectively.
安装在衬套或轴上的齿轮的旋转带动其它齿轮转动,并根据基轮的齿数加快或放慢速度。
The rotation of this gear on a hub or shaft drives other gears, which may rotate faster or slower, depending upon the number of teeth on the basic wheels.
该设计方法可在较短时间内找到较多的齿数设计方案,为进行多方案比较和优化设计打下了基础。
A lot of determination schemes of the number of gear teeth can be obtained quickly with this method so that a basis for schemes comparison and optimum design is established.
本发明有益效果是:主动齿轮与从动齿轮啮合直径和齿数相同,能保证动力主传动速度各轴一致。
The invention has beneficial effect that meshing diameter and tooth number of the driving gear and the driven gear are the same, thus, ensuring that all the shafts have same main drive speed.
此链轮齿数一定,链轮每旋转一圈,链条与相邻二齿中的一个齿啮合,此齿数定义为”工作齿数”。
The number of teeth of the sprocket is determined so that chain meshes with one of every two teeth of sprocket per turn of the sprocket. This number of teeth is termed "number of working teeth."
按常规方式加工小模数少齿数齿轮,容易出现齿轮根切现象,致使齿轮轮齿强度降低、齿轮啮合条件恶化。
To adopt usual way machining gear with small module and a few teeth, it is easy to emerge gear undercut, thus, it reduces the intensity of teeth and worsens the mesh condition.
在本次设计中要进行齿数计算、齿形分析、效率计算、强度验算、结构设计、绘制减速器装配图及零件图。
To calculate the number of teeth in the design, profile analysis, efficiency calculation and checking the strength, structural design, drawing reducer assembly drawings and part drawings.
张光辉教授认为:分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
所提出方法对于内外齿轮啮合、齿数差异较大齿轮啮合等弹性共轭曲面问题的求解,有着重要的理论和实际意义。
It has theoretical and applicable significance in solving the elastic conjugate problems of gear engagement, such as inner gear meshing, or gear transmission with large difference in gear Numbers.
因此,新型转子泵可以采用较普通转子泵更高的工作转速、更多的齿数,并获得更大的流量、更小的波动和更小的磨损。
So, this new type of cycloidal pump is capable of operating with higher rotation speed and more teeth, higher specific flow rate, less flow fluctuation and wear.
在研究滚刀加工不同齿数带轮所形成的误差分布规律及误差对带与轮啮合传动影响的基础上,确定了滚刀可加工的齿数范围与参数。
At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.
脱粒过程中,谷穗与弓齿的接触数在一定程度上反映脱粒装置的性能和能力。
The Times of contact of teeth with a grain ear in the threshing process is considered for explaining the performance and capability of the threshing unit.
探讨下颌第三磨牙的牙尖数与牙根数的关系,为临床拔除阻生齿提供依据。
This work is to study the relationship of mandibular third molars between the number of dental cusps and that of roots.
详细分析了整数圈数双头涡旋齿涡旋盘所受的切向力气体力、法向气体力、轴向气体力,提出了在任意曲轴转角下的各种气体力及各个工作腔容积的计算公式。
On the basis of the analysis of each gas force in the twin - scroll compressors, the calculation formulae of working volume and each gas force at all different crankshaft angles were derived.
详细分析了整数圈数双头涡旋齿涡旋盘所受的切向力气体力、法向气体力、轴向气体力,提出了在任意曲轴转角下的各种气体力及各个工作腔容积的计算公式。
On the basis of the analysis of each gas force in the twin - scroll compressors, the calculation formulae of working volume and each gas force at all different crankshaft angles were derived.
应用推荐