不锈钢和高镍耐蚀合金是重要的耐蚀材料。
The stainless steels and high nickel corrosion resistant alloys are critical engineering materials.
本文研究了高镍fcc平衡剂磁分离回收技术工业化工艺条件。
The paper researches into the process condition of high nickel FCC equilibrium catalyst magnetic separation recovery technology industry application.
对磨浮高镍铜精矿和浸出高镍铜渣进行了冶炼新工艺研究，提出喷吹熔炼概念。
The new smelting technology on high Ni copper concentrate from flotation and leached high Ni copper residue is studied. At last, the jetting smelting concept is put forward.
哈氏合金是一种高镍高钼合金，在硝酸铬酸、硫酸等氧化性酸中具有良好的耐腐蚀性。
Ahab's alloy is a high ni high molybdenum alloys, in nitric acid chromic acid, sulfuric acid etc oxidizing acids has good corrosion resistance.
结果表明，碳显著的影响低碳高合金钢的组织和性能，而以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that carbon influences structure and properties of LCHA significantly, and substitution for nickel with manganese may result in expected structure and properties.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
结果表明，以锰代镍低碳高合金钢可以获得预期的组织与性能。
The results indicate that LCHA with Mn in place of Ni could gain the anticipated structure and performance.
本文就对以锰代镍制取低成本低碳高合金钢，以及锰元素对其组织与性能的影响作了一些探讨。
This article use Mn to replace Ni to make low-cost LCHA, and the effect of Mn on structure and properties of LCHA was discussed following.
讨论了影响高比能镍氢电池正极材料氢氧化镍性能的因素。
The factors effecting on the performances of nickel hydroxide which is used as positive active material in high specific energy Ni/MH battery are discussed.
介绍了应用DV - 4光电光谱仪，仅用一种测定条件，测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
本文根据甲烷裂解过程中碳纤维的生长机理，设计并制备了具有高活性的纳米镍基催化剂。
In this paper, high active Ni-based catalysts for methane decomposition were designed and prepared according to the growth mechanism of carbon filaments.
表面镀镍或锡，导电率高，环境适应性好。
Surface nickel-plated or tinned, high conductivity and good acclimatization.
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
研究了粉末轧制—烧结工艺生产高纯多孔镍箔的方法。
Powder rolling-sintering process for producing high pure nickel porous foils has been studied.
通过混合掺杂改性，可以得到容量大、循环性能好、热稳定性高的掺杂锂镍氧正极材料。
Solid solutions of the cathode material with high capacity, excellent recycling ability and good thermal stability can be synthesized by co-doping technology.
而切向永磁体采用剩磁密度高但矫顽力却很低的铝镍钴。
The tangential-set magnets are AlNiCo with high remanent flux density and low coercive force.
研究了用火焰原子吸收法分析高纯铅中痕量钴、镍的测定条件。
The optimum conditions for determining trace of cobalt and nickel in high purity lead by FAAS were studied.
实践表明：工艺稳定，设备结构合理，产出的宽幅薄镍箔厚度均匀、纯度高、机械性能和表面性能良好。
The results show that the process is stable, the equipment structure is reasonable, the nickel foils produced have uniform thickness, high purity and good mechanical and apparent performance.
通过正交试验法优选出一种具有高磷含量的快速化学镀镍工艺配方。
An electroless nickel plating process with high deposition rate was optimized by orthogonal test.
镍系催化剂具有活性高、选择性好、产品分布可调、反应条件温和等优良性能。
Nickel-based catalysts possess high catalytic activity for ethylene oligomerization with high selectivity, easily-controlled oligomers distribution and moderate reaction conditions.
目的：对自蔓延高漫合成钛镍形状记忆合金进行毒理学研究。
Purpose. Study the toxicology of the porosint of self-propagating high-temperature synthesis NiTi shape memory alloy (SHS NiTi SMA).
在硝酸钠存在下碘化钾-孔雀绿-水液-固体系浮选分离铋，采用石墨炉原子吸收法对高纯镍中痕量铋进行了分析。
A new method for the flotation separation of Bismuth is used by the way of potassium iodide - malachite green - water liquid - soild system and determining Bismuth in high purity nickel in this essay.
高氮低镍不锈钢具有良好的强度、延展性及耐腐蚀性能，且可以降低晶界的腐蚀敏感性。
High nitrogen and low nickel stainless steels exhibit attractive properties as high strength and ductility, good corrosion resistance and reduced tendency to grain boundary sensitization.
原料低硫高冰镍为高冰镍经磨浮-磁选分离获得的富含贵金属的磁性产品，主要含有镍合金和少量硫化物。
This magnetic matte was obtained from high grade Ni-Cu matte by floatation-magnetic separation, which enriched in precious metals, and mainly contained Ni alloys and a small quantity of sulfides.
与稀土高铬镍氮相比，成本降低60%，与钨铬合金相比，成本降低70%。
Compared to rare earth high Cr-Ni-N, cost falls 60%; Compared to W-Cr alloy, cost falls 70%.
吉林吉恩镍业股份有限公司冶炼厂以电炉熔炼、转炉吹炼生产高冰镍。
Jilin nickel Corporation's nickel smelter has been producing nickelic matte by the process of electric smelting and converter blowing.
与传统化学镀镍工艺相比，该工艺所得镀层含磷量高、硬度高，组织结构致密均匀。
Compared with conventional electroless nickel plating process, the deposits obtained are greatly improved with higher phosphorus content, hardness, more compact and uniform microstructure.
与传统化学镀镍工艺相比，该工艺所得镀层含磷量高、硬度高，组织结构致密均匀。
Compared with conventional electroless nickel plating process, the deposits obtained are greatly improved with higher phosphorus content, hardness, more compact and uniform microstructure.
应用推荐