试验结果表明，贝氏体高强钢板的耐磨寿命可达到普碳板的3倍以上。
Test results show that the wear resistance of bainite high strength steel plate may be over 3 times that of ordinary steel plate.
本文介绍了厚板及高强钢板常见的板型缺陷，分析了其形成原因，提出了相应的控制措施。
This paper describes the frequently occurred profile defects on heavy plate and high strength plate, makes an analysis of their forming cause and puts forward corresponding control measures.
因此，作为国产高强钢板应用于大型球罐的技术需求，大瓣片高强钢球罐壳板成形机理及本构关系研究势在必行。
So with the application of domestic high strength steel in large spherical tank, it becomes imperative to study the formation mechanism and constitutive relationship of large petals.
本文介绍了热轧低碳贝氏体高强钢板在qlk800.32型斗轮取料机上与普碳钢板进行耐磨性对比工业试验的情况。
This paper introduces the contrast test of wear resistance of hot rolled low - carbon high strength bainite steel plate to ordinary steel plate on QLK800.32 bucket wheel reclaimer.
一些小的钢铁公司则会专注于一些利基市场，如瑞典的瑞典钢铁集团专著于生产高强度钢板，具有很高的利润率。
Some small producers with a focus on a niche in the market, such as Sweden's SSAB, a company specialising in high-strength steel, are very profitable.
对框架柱顶夹渣层用高强细石混凝土粘钢板套箍等方法加固，提出了具体的加固方法和注意事项。
Mehods and issues to be concerned in the strengthening of the slag layer in the top of the frame column with high strength fine stone concrete and steel plate hoop.
应采用低氢焊条焊接厚钢板与铸钢件和高强度板间的连接。
Low hydrogen electrode to be used for welding thick steel plate to casting and high tensile plates.
介绍了一种按照引进技术标准生产的新型低合金高强度钢板IE170的研制与应用情况。
A development and application is described of a new type dilute alloy and high strength steel plates, IE170 manufactured according to the technological standards introduced.
针对高强度低合金铌钒钢板在拉伸试验后出现分层开裂的现象，采用SEM、EDAX进行微观分析，发现试样内部有大量夹杂物存在，这些夹杂物主要含有钙、氧、硫、锰等元素。
The lamellar cracking was found at the specimen of HSLA Nb-V steel plate after tensile strength testing, then the fracture surface of the specimen was studied by SEM and EDAX.
不同颜色的车间底漆用于温和、高强度钢板，部分。
Different color shop primer to be used for mild and high tensile steel plates and sections.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
使用高强度钢板是实现汽车轻量化、提高汽车被动安全性的重要途径之一。
The application of high strength steel is very important in automotive light weighting industry and promoting passive security.
薄板坯连铸连轧的产品特点是晶粒细小、强度高、钢质纯净、性能均匀，适宜生产各种高强度钢板。
The characteristics of products from CSP process are small grain, high strength, clean steel, even properties. The process is suitable to produce high strength steel plate.
通过室内性能试验和整车台架及行车试验，充分显示了高强度钢板优良的力学性能和成形性能。
It was found that high strength steel sheet had excellent mechanical and forming properties in performance test, complete vehicle rig test and running test.
宝钢开发以热连轧方式生产用于制造直缝埋弧焊管的海底管线用x 65级管线钢板，其产品具有高强度、高韧性和良好的焊接性等综合性能。
The grade X65 pipeline steel used for LSAW submarine line pipe has been developed at Baosteel, which is produced by hot continuum rolling processing.
应用高强度、高性能钢板是汽车减轻质量、提高安全性的基础。
Applying high strength and high performance steel sheets is the basis of weight reduction and safety improvement for automobiles.
采用不同的点焊工艺参数对高强度钢板BIF 340实施焊接，并对焊接接头进行组织性能分析，研究点焊参数对BIF 340焊接性能的影响。
We welded the high strength steel BIF340 in different spot welding processing parameters, the structure and property of the welding joint are analyzed.
以国产WP 370含磷高强度钢板为对象，研究了它的可焊性、点焊焊点的强度以及点焊工艺参数对它们的影响。
The spot weldability and the strength of single spot-welded joint of a chinese steel WP 370 were investigated, and the effects of welding parameters on it were also tested.
配置有高强度烤漆钢板水箱，SUS304不锈钢活塞杆及双头均可活动的高压管。
Equipped with the steel water tank which is of high strength baking finish, stainless steel plunger (SUS304) and pressure pipe with two moveable ends.
高强度钢板的使用减轻了车身重量，但也引起了大面积的车身覆盖件拉毛缺陷。
The use of high strength steels reduces the weight of auto panel, alleviates the energy and environment problems, but it also arouses the galling more easily than the common steels.
链板采用高强度钢板不锈钢板制作、抗拉强度高。
The chain plate is made of high strength steel plate or stainless steel plate, which are of high tensile strength.
经转炉冶炼、LF精炼和连铸工艺生产的高强耐候钢板坯质量优异。
The continuous-casting slab of high strength weathering steel produced by converter, LF and continuous-casting process has good quality.
为了满足钢结构用钢的市场需求，本钢成功地开发了具有较高性能的结构用低合金高强度Q 460c热轧钢板。
In order to fulfil the requirement of steel market for structure, BXSTEEL developed Q460C low alloyed high strength hot-rolling plate for structure with higher capability successfully.
高强度钢板(HSS)在汽车上的采用，将有效地降低汽车重量，是提高燃料效率的最经济的措施。
The application of high strength steel (HSS) in motor vehicles can effectively reduce the auto weight, and it is the most economic attempt in rai - sing the fuel efficiency.
本文通过试验对汽车用高强度钢板B180H1的力学性能、成形性能、烘烤硬化性能和抗凹陷性能进行了全面的研究，并与DC04钢板的各项性能进行了比较。
In this paper, mechanical property, forming ability, baked-hardening and dent resistance properties of high strength steel B180H1 are studied by experiments, and compared with those of steel DC04.
简述了先进高强度汽车用钢板的最新开发和应用进展情况。
The latest progress in development and application of advanced high strength steels for automobiles is introduced.
轻量化是汽车“减重节能”的需要，采用高强度钢板已被证明是最佳的材料技术解决方案。
The high strength steel sheet has been approved to be the best material technology solution for weight-reduction of automobiles. It can also meet the demand of energy-saving.
轻量化是汽车“减重节能”的需要，采用高强度钢板已被证明是最佳的材料技术解决方案。
The high strength steel sheet has been approved to be the best material technology solution for weight-reduction of automobiles. It can also meet the demand of energy-saving.
应用推荐